| 1 | smartctl -x /dev/da2
|
|---|
| 2 | smartctl 6.0 2012-10-10 r3643 [FreeBSD 8.3-RELEASE-p5 amd64] (local build)
|
|---|
| 3 | Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 4 |
|
|---|
| 5 | === START OF INFORMATION SECTION ===
|
|---|
| 6 | Model Family: SandForce Driven SSDs
|
|---|
| 7 | Device Model: KINGSTON SE100S3100G
|
|---|
| 8 | Serial Number: 50026B7226022082
|
|---|
| 9 | LU WWN Device Id: 5 0026b7 226022082
|
|---|
| 10 | Firmware Version: 510ABBF0
|
|---|
| 11 | User Capacity: 100,030,242,816 bytes [100 GB]
|
|---|
| 12 | Sector Size: 512 bytes logical/physical
|
|---|
| 13 | Rotation Rate: Solid State Device
|
|---|
| 14 | Device is: In smartctl database [for details use: -P show]
|
|---|
| 15 | ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3
|
|---|
| 16 | SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
|
|---|
| 17 | Local Time is: Tue Jan 15 13:51:11 2013 UTC
|
|---|
| 18 | SMART support is: Available - device has SMART capability.
|
|---|
| 19 | SMART support is: Enabled
|
|---|
| 20 | AAM feature is: Unavailable
|
|---|
| 21 | APM level is: 254 (maximum performance)
|
|---|
| 22 | Rd look-ahead is: Disabled
|
|---|
| 23 | Write cache is: Enabled
|
|---|
| 24 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
|---|
| 25 |
|
|---|
| 26 | Warning! SMART Attribute Thresholds Structure error: invalid SMART checksum.
|
|---|
| 27 | === START OF READ SMART DATA SECTION ===
|
|---|
| 28 | SMART STATUS RETURN: incomplete response, ATA output registers missing
|
|---|
| 29 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 30 | Warning: This result is based on an Attribute check.
|
|---|
| 31 |
|
|---|
| 32 | General SMART Values:
|
|---|
| 33 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 34 | was never started.
|
|---|
| 35 | Auto Offline Data Collection: Disabled.
|
|---|
| 36 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 37 | without error or no self-test has ever
|
|---|
| 38 | been run.
|
|---|
| 39 | Total time to complete Offline
|
|---|
| 40 | data collection: ( 0) seconds.
|
|---|
| 41 | Offline data collection
|
|---|
| 42 | capabilities: (0x7b) SMART execute Offline immediate.
|
|---|
| 43 | Auto Offline data collection on/off support.
|
|---|
| 44 | Suspend Offline collection upon new
|
|---|
| 45 | command.
|
|---|
| 46 | Offline surface scan supported.
|
|---|
| 47 | Self-test supported.
|
|---|
| 48 | Conveyance Self-test supported.
|
|---|
| 49 | Selective Self-test supported.
|
|---|
| 50 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 51 | power-saving mode.
|
|---|
| 52 | Supports SMART auto save timer.
|
|---|
| 53 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 54 | General Purpose Logging supported.
|
|---|
| 55 | Short self-test routine
|
|---|
| 56 | recommended polling time: ( 1) minutes.
|
|---|
| 57 | Extended self-test routine
|
|---|
| 58 | recommended polling time: ( 48) minutes.
|
|---|
| 59 | Conveyance self-test routine
|
|---|
| 60 | recommended polling time: ( 2) minutes.
|
|---|
| 61 | SCT capabilities: (0x0025) SCT Status supported.
|
|---|
| 62 | SCT Data Table supported.
|
|---|
| 63 |
|
|---|
| 64 | SMART Attributes Data Structure revision number: 10
|
|---|
| 65 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 66 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 67 | 1 Raw_Read_Error_Rate PO--CK 100 100 050 - 0/3749084
|
|---|
| 68 | 5 Retired_Block_Count PO--CK 100 100 003 - 0
|
|---|
| 69 | 9 Power_On_Hours_and_Msec -O--CK 000 000 000 - 176h+00m+39.090s
|
|---|
| 70 | 12 Power_Cycle_Count -O--CK 100 100 000 - 9
|
|---|
| 71 | 13 Soft_Read_Error_Rate -O--CK 040 040 000 - 907507/3749084
|
|---|
| 72 | 100 Gigabytes_Erased -O--CK 000 000 000 - 4294864097
|
|---|
| 73 | 170 Reserve_Block_Count POSR-K+ 000 000 000 - 35328
|
|---|
| 74 | 171 Program_Fail_Count -O-R-- 000 000 000 - 0
|
|---|
| 75 | 172 Erase_Fail_Count -O--CK 000 000 000 - 0
|
|---|
| 76 | 174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 9
|
|---|
| 77 | 177 Wear_Range_Delta ------ 000 000 000 - 0
|
|---|
| 78 | 181 Program_Fail_Count -O-R-- 000 000 000 - 0
|
|---|
| 79 | 182 Erase_Fail_Count -O--CK 000 000 000 - 0
|
|---|
| 80 | 184 IO_Error_Detect_Code_Ct ------ 100 100 090 - 0
|
|---|
| 81 | 187 Reported_Uncorrect --SRC- 100 100 000 - 0
|
|---|
| 82 | 194 Temperature_Celsius -O---K 024 036 000 - 24 (Min/Max 22/36)
|
|---|
| 83 | 195 ECC_Uncorr_Error_Count --SRC- 120 120 000 - 0/3749084
|
|---|
| 84 | 196 Reallocated_Event_Count PO--CK 100 100 003 - 0
|
|---|
| 85 | 198 Uncorrectable_Sector_Ct ----C- 100 100 000 - 58119497449472
|
|---|
| 86 | 199 SATA_CRC_Error_Count --S--- 200 200 000 - 0
|
|---|
| 87 | 201 Unc_Soft_Read_Err_Rate --SRC- 120 120 000 - 0/3749084
|
|---|
| 88 | 204 Soft_ECC_Correct_Rate --SRC- 120 120 000 - 0/3749084
|
|---|
| 89 | 230 Life_Curve_Status PO--C- 100 100 000 - 100
|
|---|
| 90 | 231 SSD_Life_Left PO--C- 100 100 010 - 0
|
|---|
| 91 | 232 Available_Reservd_Space -O--CK 000 000 000 - 34
|
|---|
| 92 | 233 SandForce_Internal -O--CK 000 000 000 - 653
|
|---|
| 93 | 234 SandForce_Internal -O--CK 000 000 000 - 953
|
|---|
| 94 | 235 SuperCap_Health PO--CK 100 100 002 - 0
|
|---|
| 95 | 241 Lifetime_Writes_GiB -O--CK 000 000 000 - 953
|
|---|
| 96 | 242 Lifetime_Reads_GiB -O--CK 000 000 000 - 1
|
|---|
| 97 | ||||||_ K auto-keep
|
|---|
| 98 | |||||__ C event count
|
|---|
| 99 | ||||___ R error rate
|
|---|
| 100 | |||____ S speed/performance
|
|---|
| 101 | ||_____ O updated online
|
|---|
| 102 | |______ P prefailure warning
|
|---|
| 103 |
|
|---|
| 104 | General Purpose Log Directory Version 0
|
|---|
| 105 | SMART Log Directory Version 0
|
|---|
| 106 | GP/S Log at address 0x00 has 1 sectors [Log Directory]
|
|---|
| 107 |
|
|---|
| 108 | SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
|
|---|
| 109 |
|
|---|
| 110 | SMART Error Log not supported
|
|---|
| 111 |
|
|---|
| 112 | SMART Extended Self-test Log (GP Log 0x07) not supported
|
|---|
| 113 |
|
|---|
| 114 | SMART Self-test Log not supported
|
|---|
| 115 |
|
|---|
| 116 | SMART Selective self-test log data structure revision number 0
|
|---|
| 117 | Note: revision number not 1 implies that no selective self-test has ever been run
|
|---|
| 118 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 119 | 1 0 0 Not_testing
|
|---|
| 120 | 2 0 0 Not_testing
|
|---|
| 121 | 3 0 0 Not_testing
|
|---|
| 122 | 4 0 0 Not_testing
|
|---|
| 123 | 5 0 0 Not_testing
|
|---|
| 124 | Selective self-test flags (0x0):
|
|---|
| 125 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 126 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 127 |
|
|---|
| 128 | SCT Status Version: 3
|
|---|
| 129 | SCT Version (vendor specific): 0 (0x0000)
|
|---|
| 130 | SCT Support Level: 1
|
|---|
| 131 | Device State: Active (0)
|
|---|
| 132 | Current Temperature: 24 Celsius
|
|---|
| 133 | Power Cycle Min/Max Temperature: 22/36 Celsius
|
|---|
| 134 | Lifetime Min/Max Temperature: 22/83 Celsius
|
|---|
| 135 | Under/Over Temperature Limit Count: 0/0
|
|---|
| 136 | SCT Temperature History Version: 0 (Unknown, should be 2)
|
|---|
| 137 | Temperature Sampling Period: 1 minute
|
|---|
| 138 | Temperature Logging Interval: 10 minutes
|
|---|
| 139 | Min/Max recommended Temperature: 0/ 0 Celsius
|
|---|
| 140 | Min/Max Temperature Limit: 0/ 0 Celsius
|
|---|
| 141 | Temperature History Size (Index): 0 (115)
|
|---|
| 142 | Temperature History is empty
|
|---|
| 143 |
|
|---|
| 144 | SCT Error Recovery Control command not supported
|
|---|
| 145 |
|
|---|
| 146 | Device Statistics (GP Log 0x04) not supported
|
|---|
| 147 |
|
|---|
| 148 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 149 | ID Size Value Description
|
|---|
| 150 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 151 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 152 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 153 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 154 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 155 | 0x0008 2 0 Device-to-host non-data FIS retries
|
|---|
| 156 | 0x0009 2 20 Transition from drive PhyRdy to drive PhyNRdy
|
|---|
| 157 | 0x000a 2 21 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 158 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|---|
| 159 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
|---|
| 160 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|---|
| 161 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
|---|
| 162 | 0x0002 2 0 R_ERR response for data FIS
|
|---|
| 163 | 0x0005 2 0 R_ERR response for non-data FIS
|
|---|
| 164 | 0x000b 2 0 CRC errors within host-to-device FIS
|
|---|
| 165 | 0x000d 2 0 Non-CRC errors within host-to-device FIS
|
|---|
