smartctl -x /dev/da2 smartctl 6.0 2012-10-10 r3643 [FreeBSD 8.3-RELEASE-p5 amd64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SandForce Driven SSDs Device Model: KINGSTON SE100S3100G Serial Number: 50026B7226022082 LU WWN Device Id: 5 0026b7 226022082 Firmware Version: 510ABBF0 User Capacity: 100,030,242,816 bytes [100 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Jan 15 13:51:11 2013 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Disabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Warning! SMART Attribute Thresholds Structure error: invalid SMART checksum. === START OF READ SMART DATA SECTION === SMART STATUS RETURN: incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0025) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO--CK 100 100 050 - 0/3749084 5 Retired_Block_Count PO--CK 100 100 003 - 0 9 Power_On_Hours_and_Msec -O--CK 000 000 000 - 176h+00m+39.090s 12 Power_Cycle_Count -O--CK 100 100 000 - 9 13 Soft_Read_Error_Rate -O--CK 040 040 000 - 907507/3749084 100 Gigabytes_Erased -O--CK 000 000 000 - 4294864097 170 Reserve_Block_Count POSR-K+ 000 000 000 - 35328 171 Program_Fail_Count -O-R-- 000 000 000 - 0 172 Erase_Fail_Count -O--CK 000 000 000 - 0 174 Unexpect_Power_Loss_Ct ----CK 000 000 000 - 9 177 Wear_Range_Delta ------ 000 000 000 - 0 181 Program_Fail_Count -O-R-- 000 000 000 - 0 182 Erase_Fail_Count -O--CK 000 000 000 - 0 184 IO_Error_Detect_Code_Ct ------ 100 100 090 - 0 187 Reported_Uncorrect --SRC- 100 100 000 - 0 194 Temperature_Celsius -O---K 024 036 000 - 24 (Min/Max 22/36) 195 ECC_Uncorr_Error_Count --SRC- 120 120 000 - 0/3749084 196 Reallocated_Event_Count PO--CK 100 100 003 - 0 198 Uncorrectable_Sector_Ct ----C- 100 100 000 - 58119497449472 199 SATA_CRC_Error_Count --S--- 200 200 000 - 0 201 Unc_Soft_Read_Err_Rate --SRC- 120 120 000 - 0/3749084 204 Soft_ECC_Correct_Rate --SRC- 120 120 000 - 0/3749084 230 Life_Curve_Status PO--C- 100 100 000 - 100 231 SSD_Life_Left PO--C- 100 100 010 - 0 232 Available_Reservd_Space -O--CK 000 000 000 - 34 233 SandForce_Internal -O--CK 000 000 000 - 653 234 SandForce_Internal -O--CK 000 000 000 - 953 235 SuperCap_Health PO--CK 100 100 002 - 0 241 Lifetime_Writes_GiB -O--CK 000 000 000 - 953 242 Lifetime_Reads_GiB -O--CK 000 000 000 - 1 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 0 SMART Log Directory Version 0 GP/S Log at address 0x00 has 1 sectors [Log Directory] SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test Log not supported SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) SCT Support Level: 1 Device State: Active (0) Current Temperature: 24 Celsius Power Cycle Min/Max Temperature: 22/36 Celsius Lifetime Min/Max Temperature: 22/83 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 0 (Unknown, should be 2) Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 0 (115) Temperature History is empty SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 20 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 21 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS