Change in drivedb: Supermicro SATA DOM (SuperDOM)

[Andrei Ivanov]

Request to add (change, actually) Supermicro SATA DOM (SuperDOM) to drivedb. Smartctl output attached.

I don't have a link to any documentation, but all the info was squeezed out of Supermicro engineers, Attribute by Attribute.

The "SuperMicro SSD" is already there in the drivedb.h, but it doesn't look correct.

That's the patch we're using now:

--- smartmontools-7.1/drivedb.h.20200920 2020-09-20 15:45:41.000000000 +0000
+++ smartmontools-7.1/drivedb.h 2020-10-13 18:50:48.049599928 +0000
@@ -2118,13 +2150,33 @@

"-v 250,raw48,Read_Error_Retry_Rate " ADATA SU800/Q0913A

"-v 251,raw48,Unkn_SiliconMotion_Attr" ADATA SU800/Q0913A

},

+ Refs #9023#note-9
+
+ { "Supermicro SATA DOM (SuperDOM)",
+ "SuperMicro SSD", Supermicro SSD-DM032-SMCMVN1, tested with SuperMicro SSD/SOB20R
+ "SOB20R",
+ "",
+ "-v 1,raw48,Raw_Read_Error_Rate "
+ "-v 15,raw48,User_Capacity_Sector_Count "
+ "-v 160,raw48,Not_In_Use "
+ "-v 161,raw48,Not_In_Use "
+ "-v 163,raw48,Not_In_Use "
+ "-v 164,raw48,Not_In_Use "
+ "-v 165,raw48,Not_In_Use "
+ "-v 166,raw48,Minimum_PE_Cycles_TLC "
+ "-v 167,raw48,Not_In_Use "
+ "-v 168,raw48,Maximum_PE_Cycles_TLC "
+ "-v 231,raw48,SSD_Life_Left "
+ "-v 233,raw48,NAND_Writes_1GiB "
+ "-v 241,raw48,Lifetime_Writes_GiB "
+ "-v 242,raw48,Lifetime_Reads_GiB "
+ },

{ "Silicon Motion based OEM SSDs", Like 'Silicon Motion based SSDs' but with FW detection

"Intenso SSD|" tested with Intenso SSD/Q1107A0
"Intenso SSD Sata III|" Sata III High, tested with Intenso SSD Sata III/P0510E
"KingFast|" KingFast F6M, tested with KingFast/P0725A

• "SPCC M
  .2 SSD|" Silicon Power 2280 M55, tested with SPCC M.2 SSD/Q0627A0
• "SuperMicro SSD", Supermicro SSD-DM032-SMCMVN1, tested with SuperMicro SSD/SOB20R
• "P0510E|P0725A|Q0627A0|Q1107A0|SOB20R",

+ "SPCC M
.2 SSD", Silicon Power 2280 M55, tested with SPCC M.2 SSD/Q0627A0
+ "P0510E|P0725A|Q0627A0|Q1107A0",

"",
"-v 148,raw48,Total_SLC_Erase_Ct "
"-v 149,raw48,Max_SLC_Erase_Ct "