Custom Query (1359 matches)
Results (94 - 96 of 1359)
| Ticket | Resolution | Summary | Owner | Reporter |
|---|---|---|---|---|
| #1339 | invalid | smartctl -n standby wakes WD USB drive | ||
| Description |
I have several USB drives from different vendors, including WD.
I have found that for a particular drive model, This is a WD Elements Desktop 4TB drive. Device Model: WDC WD40EMAZ-11LW3B0 Full smartctl -x attached. I am happy to run debugs, etc. over the next week or so, after which I may have to return the drive as unfit. |
|||
| #284 | invalid | smartctl -l selftest does not show running selftest status with Toshiba MK2002TSKB | ||
| Description |
smartctl -l selftest does not show running selftest status with Toshiba MK2002TSKB HDD To reproduce: 1) Launch selftest: smartctl -t long /dev/sdX 2) Try to check the status after some time: smartctl -l selftest /dev/sdX result: there is no running selftest logged, selftest will appear in log only after completition. Workaround: Lauch another selftest:
Smartctl will show the status of current running selftest:
Platform: CentOS 6.3, 6.4 smartmontools 6.1 |
|||
| #145 | fixed | smartctl -l scterc,70,70 with RAID5 on ICH10R Onboard Raid | ||
| Description |
Hi! There is no way to send any SMART commands to an Raid array which is built by the Intel ICH10R onboard Raid controller. No issue when using the drives as single ones without raid. The Tool "Argus Monitor" is able to report SMART status values, even if the drives are in a raid array. Is there a possibility to get smartmontools working to send the scterc even if it is part of an array? Would be very very very great... Many thanks in advance |
|||
