Ticket #873: smartctl-SAMSUNG-MZ7LN512HMJP-00000.txt

File smartctl-SAMSUNG-MZ7LN512HMJP-00000.txt, 12.6 KB (added by Tobias Demuth, 7 years ago)
Line 
1smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-514.26.2.el7.x86_64] (local build)
2Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
3
4=== START OF INFORMATION SECTION ===
5Device Model: SAMSUNG MZ7LN512HMJP-00000
6Firmware Version: MAV0100Q
7User Capacity: 512,110,190,592 bytes [512 GB]
8Sector Size: 512 bytes logical/physical
9Rotation Rate: Solid State Device
10Device is: Not in smartctl database [for details use: -P showall]
11ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
12SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
13Local Time is: Tue Sep 12 09:38:52 2017 CEST
14SMART support is: Available - device has SMART capability.
15SMART support is: Enabled
16AAM feature is: Unavailable
17APM feature is: Unavailable
18Rd look-ahead is: Enabled
19Write cache is: Enabled
20ATA Security is: Disabled, frozen [SEC2]
21Wt Cache Reorder: Enabled
22
23=== START OF READ SMART DATA SECTION ===
24SMART overall-health self-assessment test result: PASSED
25
26General SMART Values:
27Offline data collection status: (0x00) Offline data collection activity
28 was never started.
29 Auto Offline Data Collection: Disabled.
30Self-test execution status: ( 0) The previous self-test routine completed
31 without error or no self-test has ever
32 been run.
33Total time to complete Offline
34data collection: ( 0) seconds.
35Offline data collection
36capabilities: (0x53) SMART execute Offline immediate.
37 Auto Offline data collection on/off support.
38 Suspend Offline collection upon new
39 command.
40 No Offline surface scan supported.
41 Self-test supported.
42 No Conveyance Self-test supported.
43 Selective Self-test supported.
44SMART capabilities: (0x0003) Saves SMART data before entering
45 power-saving mode.
46 Supports SMART auto save timer.
47Error logging capability: (0x01) Error logging supported.
48 General Purpose Logging supported.
49Short self-test routine
50recommended polling time: ( 2) minutes.
51Extended self-test routine
52recommended polling time: ( 265) minutes.
53SCT capabilities: (0x003d) SCT Status supported.
54 SCT Error Recovery Control supported.
55 SCT Feature Control supported.
56 SCT Data Table supported.
57
58SMART Attributes Data Structure revision number: 1
59Vendor Specific SMART Attributes with Thresholds:
60ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
61 5 Reallocated_Sector_Ct PO--CK 099 099 010 - 1
62 9 Power_On_Hours -O--CK 099 099 000 - 3975
63 12 Power_Cycle_Count -O--CK 099 099 000 - 7
64170 Unknown_Attribute -O--CK 099 099 010 - 1
65171 Unknown_Attribute -O--CK 100 100 010 - 0
66172 Unknown_Attribute -O--CK 100 100 010 - 0
67173 Unknown_Attribute PO--CK 099 099 005 - 2
68174 Unknown_Attribute -O--CK 100 100 000 - 0
69178 Used_Rsvd_Blk_Cnt_Chip PO--C- 099 099 010 - 1
70180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 099 099 010 - 1603
71184 End-to-End_Error PO--CK 100 100 097 - 0
72187 Reported_Uncorrect -O--CK 099 099 000 - 6
73194 Temperature_Celsius -O--CK 066 056 000 - 34
74199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
75233 Media_Wearout_Indicator PO--C- 099 099 000 - 16749252
76241 Total_LBAs_Written -O--CK 099 099 000 - 1452
77242 Total_LBAs_Read -O--CK 099 099 000 - 13730
78249 Unknown_Attribute -O--CK 099 099 000 - 1452
79 ||||||_ K auto-keep
80 |||||__ C event count
81 ||||___ R error rate
82 |||____ S speed/performance
83 ||_____ O updated online
84 |______ P prefailure warning
85
86General Purpose Log Directory Version 1
87SMART Log Directory Version 1 [multi-sector log support]
88Address Access R/W Size Description
890x00 GPL,SL R/O 1 Log Directory
900x01 SL R/O 1 Summary SMART error log
910x02 SL R/O 1 Comprehensive SMART error log
920x03 GPL R/O 1 Ext. Comprehensive SMART error log
930x06 SL R/O 1 SMART self-test log
940x07 GPL R/O 1 Extended self-test log
950x09 SL R/W 1 Selective self-test log
960x10 GPL R/O 1 NCQ Command Error log
970x11 GPL R/O 1 SATA Phy Event Counters
980x13 GPL R/O 1 SATA NCQ Send and Receive log
990x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
1000x80-0x9f GPL,SL R/W 16 Host vendor specific log
1010xdf GPL,SL VS 1 Device vendor specific log
1020xe0 GPL,SL R/W 1 SCT Command/Status
1030xe1 GPL,SL R/W 1 SCT Data Transfer
104
105SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
106Device Error Count: 6 (device log contains only the most recent 4 errors)
107 CR = Command Register
108 FEATR = Features Register
109 COUNT = Count (was: Sector Count) Register
110 LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
111 LH = LBA High (was: Cylinder High) Register ] LBA
112 LM = LBA Mid (was: Cylinder Low) Register ] Register
113 LL = LBA Low (was: Sector Number) Register ]
114 DV = Device (was: Device/Head) Register
115 DC = Device Control Register
116 ER = Error register
117 ST = Status register
118Powered_Up_Time is measured from power on, and printed as
119DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
120SS=sec, and sss=millisec. It "wraps" after 49.710 days.
121
122Error 6 [1] occurred at disk power-on lifetime: 1735 hours (72 days + 7 hours)
123 When the command that caused the error occurred, the device was active or idle.
124
125 After command completion occurred, registers were:
126 ER -- ST COUNT LBA_48 LH LM LL DV DC
127 -- -- -- == -- == == == -- -- -- -- --
128 40 -- 51 00 80 00 00 18 70 43 80 e0 00 Error: UNC 128 sectors at LBA = 0x18704380 = 410010496
129
130 Commands leading to the command that caused the error were:
131 CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
132 -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
133 25 00 00 00 80 00 00 18 70 43 80 e0 18 21d+16:43:44.704 READ DMA EXT
134 47 00 00 00 01 00 00 00 00 08 30 e0 18 21d+16:43:44.704 READ LOG DMA EXT
135 47 00 00 00 01 00 00 00 00 00 13 e0 18 21d+16:43:44.704 READ LOG DMA EXT
136 ef 00 10 00 02 00 00 00 00 00 00 e0 18 21d+16:43:44.704 SET FEATURES [Enable SATA feature]
137 27 00 00 00 00 00 00 00 00 00 00 e0 18 21d+16:43:44.704 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
138
139Error 5 [0] occurred at disk power-on lifetime: 1735 hours (72 days + 7 hours)
140 When the command that caused the error occurred, the device was active or idle.
141
142 After command completion occurred, registers were:
143 ER -- ST COUNT LBA_48 LH LM LL DV DC
144 -- -- -- == -- == == == -- -- -- -- --
145 40 -- 51 00 80 00 00 18 70 43 00 e0 00 Error: UNC 128 sectors at LBA = 0x18704300 = 410010368
146
147 Commands leading to the command that caused the error were:
148 CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
149 -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
150 25 00 00 00 80 00 00 18 70 43 00 e0 18 21d+16:43:44.704 READ DMA EXT
151 25 00 00 00 80 00 00 18 70 52 00 e0 18 21d+16:43:44.704 READ DMA EXT
152 25 00 00 00 80 00 00 18 70 51 80 e0 18 21d+16:43:44.704 READ DMA EXT
153 25 00 00 00 80 00 00 18 70 51 00 e0 18 21d+16:43:44.704 READ DMA EXT
154 25 00 00 00 80 00 00 18 70 50 80 e0 18 21d+16:43:44.704 READ DMA EXT
155
156Error 4 [3] occurred at disk power-on lifetime: 1735 hours (72 days + 7 hours)
157 When the command that caused the error occurred, the device was active or idle.
158
159 After command completion occurred, registers were:
160 ER -- ST COUNT LBA_48 LH LM LL DV DC
161 -- -- -- == -- == == == -- -- -- -- --
162 40 -- 51 00 c0 00 00 18 70 4d 80 40 00 Error: UNC at LBA = 0x18704d80 = 410013056
163
164 Commands leading to the command that caused the error were:
165 CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
166 -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
167 60 00 80 00 c0 00 00 18 70 4d 80 40 18 21d+16:43:43.704 READ FPDMA QUEUED
168 60 00 80 00 b8 00 00 18 70 4e 00 40 17 21d+16:43:43.704 READ FPDMA QUEUED
169 60 00 80 00 b0 00 00 18 70 4e 80 40 16 21d+16:43:43.704 READ FPDMA QUEUED
170 60 00 80 00 a8 00 00 18 70 4f 00 40 15 21d+16:43:43.704 READ FPDMA QUEUED
171 60 00 80 00 a0 00 00 18 70 4f 80 40 14 21d+16:43:43.704 READ FPDMA QUEUED
172
173Error 3 [2] occurred at disk power-on lifetime: 1735 hours (72 days + 7 hours)
174 When the command that caused the error occurred, the device was active or idle.
175
176 After command completion occurred, registers were:
177 ER -- ST COUNT LBA_48 LH LM LL DV DC
178 -- -- -- == -- == == == -- -- -- -- --
179 40 -- 51 00 48 00 00 18 70 52 00 40 00 Error: UNC at LBA = 0x18705200 = 410014208
180
181 Commands leading to the command that caused the error were:
182 CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
183 -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
184 60 00 80 00 48 00 00 18 70 52 00 40 09 21d+16:43:43.704 READ FPDMA QUEUED
185 60 00 80 00 40 00 00 18 70 51 80 40 08 21d+16:43:43.704 READ FPDMA QUEUED
186 60 00 80 00 38 00 00 18 70 51 00 40 07 21d+16:43:43.704 READ FPDMA QUEUED
187 60 00 80 00 30 00 00 18 70 50 80 40 06 21d+16:43:43.704 READ FPDMA QUEUED
188 60 00 80 00 28 00 00 18 70 50 00 40 05 21d+16:43:43.704 READ FPDMA QUEUED
189
190SMART Extended Self-test Log Version: 1 (1 sectors)
191Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
192# 1 Extended offline Completed without error 00% 21 -
193# 2 Extended offline Completed without error 00% 4 -
194
195SMART Selective self-test log data structure revision number 1
196 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
197 1 0 0 Not_testing
198 2 0 0 Not_testing
199 3 0 0 Not_testing
200 4 0 0 Not_testing
201 5 0 0 Not_testing
202 255 0 65535 Read_scanning was never started
203Selective self-test flags (0x0):
204 After scanning selected spans, do NOT read-scan remainder of disk.
205If Selective self-test is pending on power-up, resume after 0 minute delay.
206
207SCT Status Version: 3
208SCT Version (vendor specific): 256 (0x0100)
209SCT Support Level: 1
210Device State: Active (0)
211Current Temperature: 34 Celsius
212Power Cycle Min/Max Temperature: 28/44 Celsius
213Lifetime Min/Max Temperature: 28/44 Celsius
214Under/Over Temperature Limit Count: 0/0
215SCT Temperature History Version: 2
216Temperature Sampling Period: 1 minute
217Temperature Logging Interval: 10 minutes
218Min/Max recommended Temperature: 0/70 Celsius
219Min/Max Temperature Limit: 0/70 Celsius
220Temperature History Size (Index): 128 (59)
221
222Index Estimated Time Temperature Celsius
223 60 2017-09-11 12:20 34 ***************
224 ... ..(126 skipped). .. ***************
225 59 2017-09-12 09:30 34 ***************
226
227SCT Error Recovery Control:
228 Read: Disabled
229 Write: Disabled
230
231Device Statistics (GP Log 0x04) not supported
232
233SATA Phy Event Counters (GP Log 0x11)
234ID Size Value Description
2350x0001 2 0 Command failed due to ICRC error
2360x0002 2 0 R_ERR response for data FIS
2370x0003 2 0 R_ERR response for device-to-host data FIS
2380x0004 2 0 R_ERR response for host-to-device data FIS
2390x0005 2 0 R_ERR response for non-data FIS
2400x0006 2 0 R_ERR response for device-to-host non-data FIS
2410x0007 2 0 R_ERR response for host-to-device non-data FIS
2420x0008 2 0 Device-to-host non-data FIS retries
2430x0009 2 33 Transition from drive PhyRdy to drive PhyNRdy
2440x000a 2 33 Device-to-host register FISes sent due to a COMRESET
2450x000b 2 0 CRC errors within host-to-device FIS
2460x000d 2 0 Non-CRC errors within host-to-device FIS
2470x000f 2 0 R_ERR response for host-to-device data FIS, CRC
2480x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
2490x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
2500x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
251