| 1 | smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-514.16.1.el7.x86_64] (local build)
|
|---|
| 2 | Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Model Family: SanDisk based SSDs
|
|---|
| 6 | Device Model: SanDisk SDSSDP064G
|
|---|
| 7 | Serial Number: 151799401378
|
|---|
| 8 | LU WWN Device Id: 5 001b44 e638807a2
|
|---|
| 9 | Firmware Version: 3.2.0
|
|---|
| 10 | User Capacity: 63.023.063.040 bytes [63,0 GB]
|
|---|
| 11 | Sector Size: 512 bytes logical/physical
|
|---|
| 12 | Rotation Rate: Solid State Device
|
|---|
| 13 | Device is: In smartctl database [for details use: -P show]
|
|---|
| 14 | ATA Version is: ACS-2 T13/2015-D revision 3
|
|---|
| 15 | SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
|
|---|
| 16 | Local Time is: Fri Apr 21 13:07:11 2017 CEST
|
|---|
| 17 | SMART support is: Available - device has SMART capability.
|
|---|
| 18 | SMART support is: Enabled
|
|---|
| 19 | AAM feature is: Unavailable
|
|---|
| 20 | APM feature is: Disabled
|
|---|
| 21 | Rd look-ahead is: Enabled
|
|---|
| 22 | Write cache is: Enabled
|
|---|
| 23 | ATA Security is: Disabled, frozen [SEC2]
|
|---|
| 24 | Wt Cache Reorder: Unavailable
|
|---|
| 25 |
|
|---|
| 26 | === START OF READ SMART DATA SECTION ===
|
|---|
| 27 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 28 |
|
|---|
| 29 | General SMART Values:
|
|---|
| 30 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 31 | was never started.
|
|---|
| 32 | Auto Offline Data Collection: Disabled.
|
|---|
| 33 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 34 | without error or no self-test has ever
|
|---|
| 35 | been run.
|
|---|
| 36 | Total time to complete Offline
|
|---|
| 37 | data collection: ( 120) seconds.
|
|---|
| 38 | Offline data collection
|
|---|
| 39 | capabilities: (0x51) SMART execute Offline immediate.
|
|---|
| 40 | No Auto Offline data collection support.
|
|---|
| 41 | Suspend Offline collection upon new
|
|---|
| 42 | command.
|
|---|
| 43 | No Offline surface scan supported.
|
|---|
| 44 | Self-test supported.
|
|---|
| 45 | No Conveyance Self-test supported.
|
|---|
| 46 | Selective Self-test supported.
|
|---|
| 47 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 48 | power-saving mode.
|
|---|
| 49 | Supports SMART auto save timer.
|
|---|
| 50 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 51 | General Purpose Logging supported.
|
|---|
| 52 | Short self-test routine
|
|---|
| 53 | recommended polling time: ( 2) minutes.
|
|---|
| 54 | Extended self-test routine
|
|---|
| 55 | recommended polling time: ( 11) minutes.
|
|---|
| 56 |
|
|---|
| 57 | SMART Attributes Data Structure revision number: 1
|
|---|
| 58 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 59 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 60 | 5 Reallocated_Sector_Ct -O---- 100 100 000 - 0
|
|---|
| 61 | 9 Power_On_Hours -O---- 100 100 000 - 80
|
|---|
| 62 | 12 Power_Cycle_Count -O---- 100 100 000 - 32
|
|---|
| 63 | 165 Total_Write/Erase_Count -O---- 100 100 000 - 6104
|
|---|
| 64 | 171 Program_Fail_Count -O---- 100 100 000 - 0
|
|---|
| 65 | 172 Erase_Fail_Count -O---- 100 100 000 - 0
|
|---|
| 66 | 173 Avg_Write/Erase_Count -O---- 100 100 000 - 1
|
|---|
| 67 | 174 Unexpect_Power_Loss_Ct -O---- 100 100 000 - 20
|
|---|
| 68 | 187 Reported_Uncorrect -O---- 100 100 000 - 0
|
|---|
| 69 | 194 Temperature_Celsius -O---K 079 021 000 - 21 (Min/Max 12/52)
|
|---|
| 70 | 230 Perc_Write/Erase_Count -O---- 100 100 000 - 3
|
|---|
| 71 | 232 Perc_Avail_Resrvd_Space PO---- 100 100 005 - 0
|
|---|
| 72 | 234 Perc_Write/Erase_Ct_BC -O---- 100 100 000 - 5
|
|---|
| 73 | 241 Total_LBAs_Written -O---- 100 100 000 - 224261036
|
|---|
| 74 | 242 Total_LBAs_Read -O---- 100 100 000 - 56361752
|
|---|
| 75 | ||||||_ K auto-keep
|
|---|
| 76 | |||||__ C event count
|
|---|
| 77 | ||||___ R error rate
|
|---|
| 78 | |||____ S speed/performance
|
|---|
| 79 | ||_____ O updated online
|
|---|
| 80 | |______ P prefailure warning
|
|---|
| 81 |
|
|---|
| 82 | General Purpose Log Directory Version 1
|
|---|
| 83 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 84 | Address Access R/W Size Description
|
|---|
| 85 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 86 | 0x01 GPL,SL R/O 1 Summary SMART error log
|
|---|
| 87 | 0x03 GPL,SL R/O 16 Ext. Comprehensive SMART error log
|
|---|
| 88 | 0x04 GPL,SL R/O 8 Device Statistics log
|
|---|
| 89 | 0x06 GPL,SL R/O 1 SMART self-test log
|
|---|
| 90 | 0x09 GPL,SL R/W 1 Selective self-test log
|
|---|
| 91 | 0x10 GPL,SL R/O 1 NCQ Command Error log
|
|---|
| 92 | 0x11 GPL,SL R/O 1 SATA Phy Event Counters
|
|---|
| 93 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|---|
| 94 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 95 | 0xa1 GPL,SL VS 1 Device vendor specific log
|
|---|
| 96 | 0xa2 GPL,SL VS 2 Device vendor specific log
|
|---|
| 97 | 0xa3 GPL,SL VS 1 Device vendor specific log
|
|---|
| 98 | 0xa6-0xa7 GPL,SL VS 255 Device vendor specific log
|
|---|
| 99 |
|
|---|
| 100 | Warning! SMART Extended Comprehensive Error Log Structure (16/16) error: invalid SMART checksum.
|
|---|
| 101 | SMART Extended Comprehensive Error Log Version: 1 (16 sectors)
|
|---|
| 102 | No Errors Logged
|
|---|
| 103 |
|
|---|
| 104 | SMART Extended Self-test Log (GP Log 0x07) not supported
|
|---|
| 105 |
|
|---|
| 106 | SMART Self-test log structure revision number 1
|
|---|
| 107 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 108 | # 1 Short offline Completed without error 00% 80 -
|
|---|
| 109 | # 2 Short offline Completed without error 00% 80 -
|
|---|
| 110 | # 3 Short offline Completed without error 00% 80 -
|
|---|
| 111 | # 4 Short offline Completed without error 00% 80 -
|
|---|
| 112 | # 5 Short offline Completed without error 00% 80 -
|
|---|
| 113 | # 6 Short offline Completed without error 00% 80 -
|
|---|
| 114 | # 7 Extended offline Completed without error 00% 80 -
|
|---|
| 115 | # 8 Short offline Completed without error 00% 80 -
|
|---|
| 116 | # 9 Short offline Completed without error 00% 79 -
|
|---|
| 117 | #10 Short offline Completed without error 00% 79 -
|
|---|
| 118 | #11 Short offline Completed without error 00% 79 -
|
|---|
| 119 | #12 Short offline Completed without error 00% 79 -
|
|---|
| 120 | #13 Short offline Completed without error 00% 79 -
|
|---|
| 121 | #14 Short offline Completed without error 00% 79 -
|
|---|
| 122 | #15 Extended offline Completed without error 00% 79 -
|
|---|
| 123 | #16 Short offline Completed without error 00% 78 -
|
|---|
| 124 | #17 Short offline Completed without error 00% 78 -
|
|---|
| 125 | #18 Short offline Completed without error 00% 78 -
|
|---|
| 126 | #19 Short offline Completed without error 00% 78 -
|
|---|
| 127 | #20 Short offline Completed without error 00% 78 -
|
|---|
| 128 | #21 Short offline Completed without error 00% 78 -
|
|---|
| 129 |
|
|---|
| 130 | SMART Selective self-test log data structure revision number 1
|
|---|
| 131 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 132 | 1 0 0 Not_testing
|
|---|
| 133 | 2 0 0 Not_testing
|
|---|
| 134 | 3 0 0 Not_testing
|
|---|
| 135 | 4 0 0 Not_testing
|
|---|
| 136 | 5 0 0 Not_testing
|
|---|
| 137 | Selective self-test flags (0x0):
|
|---|
| 138 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 139 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 140 |
|
|---|
| 141 | SCT Commands not supported
|
|---|
| 142 |
|
|---|
| 143 | Device Statistics (GP Log 0x04)
|
|---|
| 144 | Page Offset Size Value Description
|
|---|
| 145 | 5 ===== = = == Temperature Statistics (rev 1) ==
|
|---|
| 146 | 5 0x008 1 21 Current Temperature
|
|---|
| 147 | 5 0x010 1 - Average Short Term Temperature
|
|---|
| 148 | 5 0x018 1 - Average Long Term Temperature
|
|---|
| 149 | 5 0x020 1 42 Highest Temperature
|
|---|
| 150 | 5 0x028 1 14 Lowest Temperature
|
|---|
| 151 | 5 0x030 1 - Highest Average Short Term Temperature
|
|---|
| 152 | 5 0x038 1 - Lowest Average Short Term Temperature
|
|---|
| 153 | 5 0x040 1 - Highest Average Long Term Temperature
|
|---|
| 154 | 5 0x048 1 - Lowest Average Long Term Temperature
|
|---|
| 155 | 5 0x050 4 0 Time in Over-Temperature
|
|---|
| 156 | 5 0x058 1 95 Specified Maximum Operating Temperature
|
|---|
| 157 | 5 0x060 4 0 Time in Under-Temperature
|
|---|
| 158 | 5 0x068 1 0 Specified Minimum Operating Temperature
|
|---|
| 159 | 7 ===== = = == Solid State Device Statistics (rev 1) ==
|
|---|
| 160 | 7 0x008 1 0~ Percentage Used Endurance Indicator
|
|---|
| 161 | |_ ~ normalized value
|
|---|
| 162 |
|
|---|
| 163 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 164 | ID Size Value Description
|
|---|
| 165 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
|---|
| 166 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
|---|
| 167 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
|---|
| 168 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
|---|
| 169 | 0x0009 2 65535+ Transition from drive PhyRdy to drive PhyNRdy
|
|---|
| 170 | 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 171 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
|---|
| 172 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
|---|
| 173 | 0x0001 2 0 Command failed due to ICRC error
|
|---|
| 174 |
|
|---|
