| 1 | smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.4.12] (local build)
|
|---|
| 2 | Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: SAMSUNG MZHPV512HDGL-00000
|
|---|
| 6 | Serial Number: S1X1NYAG614548
|
|---|
| 7 | LU WWN Device Id: 5 002538 900021fb1
|
|---|
| 8 | Firmware Version: BXW2500Q
|
|---|
| 9 | User Capacity: 512,110,190,592 bytes [512 GB]
|
|---|
| 10 | Sector Size: 512 bytes logical/physical
|
|---|
| 11 | Rotation Rate: Solid State Device
|
|---|
| 12 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 13 | ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
|
|---|
| 14 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 15 | Local Time is: Tue Jun 7 05:59:33 2016 CDT
|
|---|
| 16 | SMART support is: Available - device has SMART capability.
|
|---|
| 17 | SMART support is: Enabled
|
|---|
| 18 | AAM feature is: Unavailable
|
|---|
| 19 | APM feature is: Unavailable
|
|---|
| 20 | Rd look-ahead is: Enabled
|
|---|
| 21 | Write cache is: Enabled
|
|---|
| 22 | ATA Security is: Disabled, frozen [SEC2]
|
|---|
| 23 | Wt Cache Reorder: Enabled
|
|---|
| 24 |
|
|---|
| 25 | === START OF READ SMART DATA SECTION ===
|
|---|
| 26 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 27 |
|
|---|
| 28 | General SMART Values:
|
|---|
| 29 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 30 | was never started.
|
|---|
| 31 | Auto Offline Data Collection: Disabled.
|
|---|
| 32 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 33 | without error or no self-test has ever
|
|---|
| 34 | been run.
|
|---|
| 35 | Total time to complete Offline
|
|---|
| 36 | data collection: ( 0) seconds.
|
|---|
| 37 | Offline data collection
|
|---|
| 38 | capabilities: (0x53) SMART execute Offline immediate.
|
|---|
| 39 | Auto Offline data collection on/off support.
|
|---|
| 40 | Suspend Offline collection upon new
|
|---|
| 41 | command.
|
|---|
| 42 | No Offline surface scan supported.
|
|---|
| 43 | Self-test supported.
|
|---|
| 44 | No Conveyance Self-test supported.
|
|---|
| 45 | Selective Self-test supported.
|
|---|
| 46 | SMART capabilities: (0x0003) Saves SMART data before entering
|
|---|
| 47 | power-saving mode.
|
|---|
| 48 | Supports SMART auto save timer.
|
|---|
| 49 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 50 | General Purpose Logging supported.
|
|---|
| 51 | Short self-test routine
|
|---|
| 52 | recommended polling time: ( 2) minutes.
|
|---|
| 53 | Extended self-test routine
|
|---|
| 54 | recommended polling time: ( 35) minutes.
|
|---|
| 55 | SCT capabilities: (0x003d) SCT Status supported.
|
|---|
| 56 | SCT Error Recovery Control supported.
|
|---|
| 57 | SCT Feature Control supported.
|
|---|
| 58 | SCT Data Table supported.
|
|---|
| 59 |
|
|---|
| 60 | SMART Attributes Data Structure revision number: 1
|
|---|
| 61 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 62 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
|---|
| 63 | 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
|
|---|
| 64 | 9 Power_On_Hours -O--CK 099 099 000 - 4454
|
|---|
| 65 | 12 Power_Cycle_Count -O--CK 099 099 000 - 98
|
|---|
| 66 | 170 Unknown_Attribute -O--CK 100 100 010 - 0
|
|---|
| 67 | 171 Unknown_Attribute -O--CK 100 100 010 - 0
|
|---|
| 68 | 172 Unknown_Attribute -O--CK 100 100 010 - 0
|
|---|
| 69 | 173 Unknown_Attribute PO--CK 100 100 005 - 0
|
|---|
| 70 | 174 Unknown_Attribute -O--CK 099 099 000 - 29
|
|---|
| 71 | 178 Used_Rsvd_Blk_Cnt_Chip PO--C- 100 100 010 - 0
|
|---|
| 72 | 180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 1634
|
|---|
| 73 | 184 End-to-End_Error PO--CK 100 100 097 - 0
|
|---|
| 74 | 187 Reported_Uncorrect -O--CK 100 100 000 - 0
|
|---|
| 75 | 194 Temperature_Celsius -O--CK 051 035 000 - 49
|
|---|
| 76 | 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
|
|---|
| 77 | 233 Media_Wearout_Indicator -O--CK 099 099 000 - 201
|
|---|
| 78 | 241 Total_LBAs_Written -O--CK 099 099 000 - 201
|
|---|
| 79 | 242 Total_LBAs_Read -O--CK 099 099 000 - 203
|
|---|
| 80 | ||||||_ K auto-keep
|
|---|
| 81 | |||||__ C event count
|
|---|
| 82 | ||||___ R error rate
|
|---|
| 83 | |||____ S speed/performance
|
|---|
| 84 | ||_____ O updated online
|
|---|
| 85 | |______ P prefailure warning
|
|---|
| 86 |
|
|---|
| 87 | General Purpose Log Directory Version 1
|
|---|
| 88 | SMART Log Directory Version 1 [multi-sector log support]
|
|---|
| 89 | Address Access R/W Size Description
|
|---|
| 90 | 0x00 GPL,SL R/O 1 Log Directory
|
|---|
| 91 | 0x01 SL R/O 1 Summary SMART error log
|
|---|
| 92 | 0x02 SL R/O 1 Comprehensive SMART error log
|
|---|
| 93 | 0x03 GPL R/O 1 Ext. Comprehensive SMART error log
|
|---|
| 94 | 0x06 SL R/O 1 SMART self-test log
|
|---|
| 95 | 0x07 GPL R/O 1 Extended self-test log
|
|---|
| 96 | 0x09 SL R/W 1 Selective self-test log
|
|---|
| 97 | 0x10 GPL R/O 1 SATA NCQ Queued Error log
|
|---|
| 98 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
|---|
| 99 | 0x13 GPL R/O 1 SATA NCQ Send and Receive log
|
|---|
| 100 | 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
|
|---|
| 101 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
|---|
| 102 | 0xdf GPL VS 1 Device vendor specific log
|
|---|
| 103 |
|
|---|
| 104 | SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
|
|---|
| 105 | No Errors Logged
|
|---|
| 106 |
|
|---|
| 107 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
|---|
| 108 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
|---|
| 109 | # 1 Short offline Completed without error 00% 4454 -
|
|---|
| 110 | # 2 Short offline Completed without error 00% 4453 -
|
|---|
| 111 | # 3 Short offline Completed without error 00% 4453 -
|
|---|
| 112 |
|
|---|
| 113 | SMART Selective self-test log data structure revision number 1
|
|---|
| 114 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 115 | 1 0 0 Not_testing
|
|---|
| 116 | 2 0 0 Not_testing
|
|---|
| 117 | 3 0 0 Not_testing
|
|---|
| 118 | 4 0 0 Not_testing
|
|---|
| 119 | 5 0 0 Not_testing
|
|---|
| 120 | 255 0 65535 Read_scanning was never started
|
|---|
| 121 | Selective self-test flags (0x0):
|
|---|
| 122 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 123 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 124 |
|
|---|
| 125 | SCT Status Version: 3
|
|---|
| 126 | SCT Version (vendor specific): 256 (0x0100)
|
|---|
| 127 | SCT Support Level: 1
|
|---|
| 128 | Device State: SCT command executing in background (5)
|
|---|
| 129 | Current Temperature: 50 Celsius
|
|---|
| 130 | Power Cycle Min/Max Temperature: 40/52 Celsius
|
|---|
| 131 | Lifetime Min/Max Temperature: 0/70 Celsius
|
|---|
| 132 | Under/Over Temperature Limit Count: 4294967295/4294901760
|
|---|
| 133 | SMART Status: 0xffff (Reserved)
|
|---|
| 134 |
|
|---|
| 135 | SCT Temperature History Version: 3 (Unknown, should be 2)
|
|---|
| 136 | Temperature Sampling Period: 1 minute
|
|---|
| 137 | Temperature Logging Interval: 10 minutes
|
|---|
| 138 | Min/Max recommended Temperature: 0/70 Celsius
|
|---|
| 139 | Min/Max Temperature Limit: 0/70 Celsius
|
|---|
| 140 | Temperature History Size (Index): 128 (49)
|
|---|
| 141 |
|
|---|
| 142 | Index Estimated Time Temperature Celsius
|
|---|
| 143 | 50 2016-06-06 08:40 48 *****************************
|
|---|
| 144 | ... ..( 13 skipped). .. *****************************
|
|---|
| 145 | 64 2016-06-06 11:00 48 *****************************
|
|---|
| 146 | 65 2016-06-06 11:10 49 ******************************
|
|---|
| 147 | ... ..( 13 skipped). .. ******************************
|
|---|
| 148 | 79 2016-06-06 13:30 49 ******************************
|
|---|
| 149 | 80 2016-06-06 13:40 50 *******************************
|
|---|
| 150 | ... ..( 13 skipped). .. *******************************
|
|---|
| 151 | 94 2016-06-06 16:00 50 *******************************
|
|---|
| 152 | 95 2016-06-06 16:10 51 ********************************
|
|---|
| 153 | ... ..( 12 skipped). .. ********************************
|
|---|
| 154 | 108 2016-06-06 18:20 51 ********************************
|
|---|
| 155 | 109 2016-06-06 18:30 52 *********************************
|
|---|
| 156 | ... ..( 12 skipped). .. *********************************
|
|---|
| 157 | 122 2016-06-06 20:40 52 *********************************
|
|---|
| 158 | 123 2016-06-06 20:50 51 ********************************
|
|---|
| 159 | 124 2016-06-06 21:00 51 ********************************
|
|---|
| 160 | 125 2016-06-06 21:10 52 *********************************
|
|---|
| 161 | ... ..( 13 skipped). .. *********************************
|
|---|
| 162 | 11 2016-06-06 23:30 52 *********************************
|
|---|
| 163 | 12 2016-06-06 23:40 51 ********************************
|
|---|
| 164 | ... ..( 19 skipped). .. ********************************
|
|---|
| 165 | 32 2016-06-07 03:00 51 ********************************
|
|---|
| 166 | 33 2016-06-07 03:10 50 *******************************
|
|---|
| 167 | ... ..( 9 skipped). .. *******************************
|
|---|
| 168 | 43 2016-06-07 04:50 50 *******************************
|
|---|
| 169 | 44 2016-06-07 05:00 49 ******************************
|
|---|
| 170 | ... ..( 3 skipped). .. ******************************
|
|---|
| 171 | 48 2016-06-07 05:40 49 ******************************
|
|---|
| 172 | 49 2016-06-07 05:50 50 *******************************
|
|---|
| 173 |
|
|---|
| 174 | SCT Error Recovery Control:
|
|---|
| 175 | Read: Disabled
|
|---|
| 176 | Write: Disabled
|
|---|
| 177 |
|
|---|
| 178 | Device Statistics (GP/SMART Log 0x04) not supported
|
|---|
| 179 |
|
|---|
| 180 | SATA Phy Event Counters (GP Log 0x11)
|
|---|
| 181 | ID Size Value Description
|
|---|
| 182 | 0x0001 4 0 Command failed due to ICRC error
|
|---|
| 183 | 0x000a 4 16 Device-to-host register FISes sent due to a COMRESET
|
|---|
| 184 |
|
|---|
