smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.4.12] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SAMSUNG MZHPV512HDGL-00000 Serial Number: S1X1NYAG614548 LU WWN Device Id: 5 002538 900021fb1 Firmware Version: BXW2500Q User Capacity: 512,110,190,592 bytes [512 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Jun 7 05:59:33 2016 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 35) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 4454 12 Power_Cycle_Count -O--CK 099 099 000 - 98 170 Unknown_Attribute -O--CK 100 100 010 - 0 171 Unknown_Attribute -O--CK 100 100 010 - 0 172 Unknown_Attribute -O--CK 100 100 010 - 0 173 Unknown_Attribute PO--CK 100 100 005 - 0 174 Unknown_Attribute -O--CK 099 099 000 - 29 178 Used_Rsvd_Blk_Cnt_Chip PO--C- 100 100 010 - 0 180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 1634 184 End-to-End_Error PO--CK 100 100 097 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 194 Temperature_Celsius -O--CK 051 035 000 - 49 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 233 Media_Wearout_Indicator -O--CK 099 099 000 - 201 241 Total_LBAs_Written -O--CK 099 099 000 - 201 242 Total_LBAs_Read -O--CK 099 099 000 - 203 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xdf GPL VS 1 Device vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 4454 - # 2 Short offline Completed without error 00% 4453 - # 3 Short offline Completed without error 00% 4453 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: SCT command executing in background (5) Current Temperature: 50 Celsius Power Cycle Min/Max Temperature: 40/52 Celsius Lifetime Min/Max Temperature: 0/70 Celsius Under/Over Temperature Limit Count: 4294967295/4294901760 SMART Status: 0xffff (Reserved) SCT Temperature History Version: 3 (Unknown, should be 2) Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (49) Index Estimated Time Temperature Celsius 50 2016-06-06 08:40 48 ***************************** ... ..( 13 skipped). .. ***************************** 64 2016-06-06 11:00 48 ***************************** 65 2016-06-06 11:10 49 ****************************** ... ..( 13 skipped). .. ****************************** 79 2016-06-06 13:30 49 ****************************** 80 2016-06-06 13:40 50 ******************************* ... ..( 13 skipped). .. ******************************* 94 2016-06-06 16:00 50 ******************************* 95 2016-06-06 16:10 51 ******************************** ... ..( 12 skipped). .. ******************************** 108 2016-06-06 18:20 51 ******************************** 109 2016-06-06 18:30 52 ********************************* ... ..( 12 skipped). .. ********************************* 122 2016-06-06 20:40 52 ********************************* 123 2016-06-06 20:50 51 ******************************** 124 2016-06-06 21:00 51 ******************************** 125 2016-06-06 21:10 52 ********************************* ... ..( 13 skipped). .. ********************************* 11 2016-06-06 23:30 52 ********************************* 12 2016-06-06 23:40 51 ******************************** ... ..( 19 skipped). .. ******************************** 32 2016-06-07 03:00 51 ******************************** 33 2016-06-07 03:10 50 ******************************* ... ..( 9 skipped). .. ******************************* 43 2016-06-07 04:50 50 ******************************* 44 2016-06-07 05:00 49 ****************************** ... ..( 3 skipped). .. ****************************** 48 2016-06-07 05:40 49 ****************************** 49 2016-06-07 05:50 50 ******************************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x000a 4 16 Device-to-host register FISes sent due to a COMRESET