| 1 | smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1127.8.2.el7.x86_64] (local build)
|
|---|
| 2 | Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org
|
|---|
| 3 |
|
|---|
| 4 | === START OF INFORMATION SECTION ===
|
|---|
| 5 | Device Model: TS512GSSD470K
|
|---|
| 6 | Serial Number: H805960079
|
|---|
| 7 | LU WWN Device Id: 5 7c3548 20ce0498f
|
|---|
| 8 | Firmware Version: 22Z2UCFS
|
|---|
| 9 | User Capacity: 512,110,190,592 bytes [512 GB]
|
|---|
| 10 | Sector Size: 512 bytes logical/physical
|
|---|
| 11 | Rotation Rate: Solid State Device
|
|---|
| 12 | Form Factor: 2.5 inches
|
|---|
| 13 | Device is: Not in smartctl database [for details use: -P showall]
|
|---|
| 14 | ATA Version is: ACS-3 T13/2161-D revision 5
|
|---|
| 15 | SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
|
|---|
| 16 | Local Time is: Tue Oct 3 18:38:28 2023 JST
|
|---|
| 17 | SMART support is: Available - device has SMART capability.
|
|---|
| 18 | SMART support is: Enabled
|
|---|
| 19 |
|
|---|
| 20 | === START OF READ SMART DATA SECTION ===
|
|---|
| 21 | SMART overall-health self-assessment test result: PASSED
|
|---|
| 22 |
|
|---|
| 23 | General SMART Values:
|
|---|
| 24 | Offline data collection status: (0x00) Offline data collection activity
|
|---|
| 25 | was never started.
|
|---|
| 26 | Auto Offline Data Collection: Disabled.
|
|---|
| 27 | Self-test execution status: ( 0) The previous self-test routine completed
|
|---|
| 28 | without error or no self-test has ever
|
|---|
| 29 | been run.
|
|---|
| 30 | Total time to complete Offline
|
|---|
| 31 | data collection: ( 0) seconds.
|
|---|
| 32 | Offline data collection
|
|---|
| 33 | capabilities: (0x7b) SMART execute Offline immediate.
|
|---|
| 34 | Auto Offline data collection on/off support.
|
|---|
| 35 | Suspend Offline collection upon new
|
|---|
| 36 | command.
|
|---|
| 37 | Offline surface scan supported.
|
|---|
| 38 | Self-test supported.
|
|---|
| 39 | Conveyance Self-test supported.
|
|---|
| 40 | Selective Self-test supported.
|
|---|
| 41 | SMART capabilities: (0x0002) Does not save SMART data before
|
|---|
| 42 | entering power-saving mode.
|
|---|
| 43 | Supports SMART auto save timer.
|
|---|
| 44 | Error logging capability: (0x01) Error logging supported.
|
|---|
| 45 | General Purpose Logging supported.
|
|---|
| 46 | Short self-test routine
|
|---|
| 47 | recommended polling time: ( 2) minutes.
|
|---|
| 48 | Extended self-test routine
|
|---|
| 49 | recommended polling time: ( 30) minutes.
|
|---|
| 50 | Conveyance self-test routine
|
|---|
| 51 | recommended polling time: ( 2) minutes.
|
|---|
| 52 |
|
|---|
| 53 | SMART Attributes Data Structure revision number: 16
|
|---|
| 54 | Vendor Specific SMART Attributes with Thresholds:
|
|---|
| 55 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
|
|---|
| 56 | 1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0
|
|---|
| 57 | 5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0
|
|---|
| 58 | 9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 435
|
|---|
| 59 | 12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 10
|
|---|
| 60 | 148 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 76
|
|---|
| 61 | 149 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 2
|
|---|
| 62 | 150 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
|
|---|
| 63 | 151 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
|
|---|
| 64 | 159 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
|
|---|
| 65 | 160 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
|
|---|
| 66 | 161 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 55
|
|---|
| 67 | 163 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 66
|
|---|
| 68 | 164 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 3
|
|---|
| 69 | 165 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 1
|
|---|
| 70 | 166 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
|
|---|
| 71 | 167 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
|
|---|
| 72 | 168 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 3000
|
|---|
| 73 | 169 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 100
|
|---|
| 74 | 177 Wear_Leveling_Count 0x0000 100 100 050 Old_age Offline - 0
|
|---|
| 75 | 181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0
|
|---|
| 76 | 182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0
|
|---|
| 77 | 192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 4
|
|---|
| 78 | 194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 42
|
|---|
| 79 | 195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 0
|
|---|
| 80 | 196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline - 0
|
|---|
| 81 | 199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 1
|
|---|
| 82 | 232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100
|
|---|
| 83 | 241 Total_LBAs_Written 0x0000 100 100 000 Old_age Offline - 144
|
|---|
| 84 | 242 Total_LBAs_Read 0x0000 100 100 000 Old_age Offline - 1
|
|---|
| 85 | 245 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 31
|
|---|
| 86 |
|
|---|
| 87 | SMART Error Log Version: 1
|
|---|
| 88 | No Errors Logged
|
|---|
| 89 |
|
|---|
| 90 | SMART Self-test log structure revision number 1
|
|---|
| 91 | No self-tests have been logged. [To run self-tests, use: smartctl -t]
|
|---|
| 92 |
|
|---|
| 93 | SMART Selective self-test log data structure revision number 1
|
|---|
| 94 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
|---|
| 95 | 1 0 0 Not_testing
|
|---|
| 96 | 2 0 0 Not_testing
|
|---|
| 97 | 3 0 0 Not_testing
|
|---|
| 98 | 4 0 0 Not_testing
|
|---|
| 99 | 5 0 0 Completed [00% left] (0-65535)
|
|---|
| 100 | Selective self-test flags (0x0):
|
|---|
| 101 | After scanning selected spans, do NOT read-scan remainder of disk.
|
|---|
| 102 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
|---|
| 103 |
|
|---|
