smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1127.8.2.el7.x86_64] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: TS512GSSD470K Serial Number: H805960079 LU WWN Device Id: 5 7c3548 20ce0498f Firmware Version: 22Z2UCFS User Capacity: 512,110,190,592 bytes [512 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Oct 3 18:38:28 2023 JST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0 5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0 9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 435 12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 10 148 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 76 149 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 2 150 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 151 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 159 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 160 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 161 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 55 163 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 66 164 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 3 165 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 1 166 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 167 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 168 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 3000 169 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 100 177 Wear_Leveling_Count 0x0000 100 100 050 Old_age Offline - 0 181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0 182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0 192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 4 194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 42 195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 0 196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 1 232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100 241 Total_LBAs_Written 0x0000 100 100 000 Old_age Offline - 144 242 Total_LBAs_Read 0x0000 100 100 000 Old_age Offline - 1 245 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 31 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Completed [00% left] (0-65535) Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.