1 | smartctl 7.2 2020-12-30 r5155 [x86_64-w64-mingw32-w10-b19043] (sf-7.2-1) |
---|
2 | Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org |
---|
3 | |
---|
4 | === START OF INFORMATION SECTION === |
---|
5 | Model Family: Seagate Barracuda 7200.11 |
---|
6 | Device Model: ST3500320AS |
---|
7 | Serial Number: 9QM7K500 |
---|
8 | LU WWN Device Id: 5 000c50 0105b787d |
---|
9 | Firmware Version: SD1A |
---|
10 | User Capacity: 500 106 780 160 bytes [500 GB] |
---|
11 | Sector Size: 512 bytes logical/physical |
---|
12 | Rotation Rate: 7200 rpm |
---|
13 | Device is: In smartctl database [for details use: -P show] |
---|
14 | ATA Version is: ATA8-ACS T13/1699-D revision 4 |
---|
15 | SATA Version is: SATA 2.6, 3.0 Gb/s |
---|
16 | Local Time is: Sat Feb 12 14:09:10 2022 SE |
---|
17 | SMART support is: Available - device has SMART capability. |
---|
18 | SMART support is: Enabled |
---|
19 | AAM feature is: Unavailable |
---|
20 | APM feature is: Unavailable |
---|
21 | Rd look-ahead is: Enabled |
---|
22 | Write cache is: Enabled |
---|
23 | DSN feature is: Unavailable |
---|
24 | ATA Security is: Disabled, frozen [SEC2] |
---|
25 | |
---|
26 | === START OF READ SMART DATA SECTION === |
---|
27 | SMART overall-health self-assessment test result: PASSED |
---|
28 | |
---|
29 | General SMART Values: |
---|
30 | Offline data collection status: (0x82) Offline data collection activity |
---|
31 | was completed without error. |
---|
32 | Auto Offline Data Collection: Enabled. |
---|
33 | Self-test execution status: ( 121) The previous self-test completed having |
---|
34 | the read element of the test failed. |
---|
35 | Total time to complete Offline |
---|
36 | data collection: ( 634) seconds. |
---|
37 | Offline data collection |
---|
38 | capabilities: (0x7b) SMART execute Offline immediate. |
---|
39 | Auto Offline data collection on/off support. |
---|
40 | Suspend Offline collection upon new |
---|
41 | command. |
---|
42 | Offline surface scan supported. |
---|
43 | Self-test supported. |
---|
44 | Conveyance Self-test supported. |
---|
45 | Selective Self-test supported. |
---|
46 | SMART capabilities: (0x0003) Saves SMART data before entering |
---|
47 | power-saving mode. |
---|
48 | Supports SMART auto save timer. |
---|
49 | Error logging capability: (0x01) Error logging supported. |
---|
50 | General Purpose Logging supported. |
---|
51 | Short self-test routine |
---|
52 | recommended polling time: ( 1) minutes. |
---|
53 | Extended self-test routine |
---|
54 | recommended polling time: ( 118) minutes. |
---|
55 | Conveyance self-test routine |
---|
56 | recommended polling time: ( 2) minutes. |
---|
57 | SCT capabilities: (0x103b) SCT Status supported. |
---|
58 | SCT Error Recovery Control supported. |
---|
59 | SCT Feature Control supported. |
---|
60 | SCT Data Table supported. |
---|
61 | |
---|
62 | SMART Attributes Data Structure revision number: 10 |
---|
63 | Vendor Specific SMART Attributes with Thresholds: |
---|
64 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
---|
65 | 1 Raw_Read_Error_Rate POSR-- 116 091 006 - 908154 |
---|
66 | 3 Spin_Up_Time PO---- 095 094 000 - 0 |
---|
67 | 4 Start_Stop_Count -O--CK 097 097 020 - 3238 |
---|
68 | 5 Reallocated_Sector_Ct PO--CK 094 094 036 - 133 |
---|
69 | 7 Seek_Error_Rate POSR-- 087 060 030 - 642590049 |
---|
70 | 9 Power_On_Hours -O--CK 079 079 000 - 18610 |
---|
71 | 10 Spin_Retry_Count PO--C- 100 100 097 - 4 |
---|
72 | 12 Power_Cycle_Count -O--CK 098 098 020 - 3041 |
---|
73 | 184 End-to-End_Error -O--CK 100 100 099 - 0 |
---|
74 | 187 Reported_Uncorrect -O--CK 001 001 000 - 248 |
---|
75 | 188 Command_Timeout -O--CK 100 098 000 - 25770197043 |
---|
76 | 189 High_Fly_Writes -O-RCK 100 100 000 - 0 |
---|
77 | 190 Airflow_Temperature_Cel -O---K 059 055 045 - 41 (Min/Max 39/41) |
---|
78 | 194 Temperature_Celsius -O---K 041 045 000 - 41 (0 8 0 0 0) |
---|
79 | 195 Hardware_ECC_Recovered -O-RC- 041 033 000 - 908154 |
---|
80 | 197 Current_Pending_Sector -O--C- 100 100 000 - 27 |
---|
81 | 198 Offline_Uncorrectable ----C- 100 100 000 - 27 |
---|
82 | 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 53 |
---|
83 | ||||||_ K auto-keep |
---|
84 | |||||__ C event count |
---|
85 | ||||___ R error rate |
---|
86 | |||____ S speed/performance |
---|
87 | ||_____ O updated online |
---|
88 | |______ P prefailure warning |
---|
89 | |
---|
90 | General Purpose Log Directory Version 1 |
---|
91 | SMART Log Directory Version 1 [multi-sector log support] |
---|
92 | Address Access R/W Size Description |
---|
93 | 0x00 GPL,SL R/O 1 Log Directory |
---|
94 | 0x01 GPL,SL R/O 1 Summary SMART error log |
---|
95 | 0x02 GPL,SL R/O 5 Comprehensive SMART error log |
---|
96 | 0x03 GPL,SL R/O 5 Ext. Comprehensive SMART error log |
---|
97 | 0x06 GPL,SL R/O 1 SMART self-test log |
---|
98 | 0x07 GPL,SL R/O 1 Extended self-test log |
---|
99 | 0x09 GPL,SL R/W 1 Selective self-test log |
---|
100 | 0x10 GPL,SL R/O 1 NCQ Command Error log |
---|
101 | 0x11 GPL,SL R/O 1 SATA Phy Event Counters log |
---|
102 | 0x21 GPL,SL R/O 1 Write stream error log |
---|
103 | 0x22 GPL,SL R/O 1 Read stream error log |
---|
104 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
---|
105 | 0xa1 GPL,SL VS 20 Device vendor specific log |
---|
106 | 0xa2 GPL VS 2248 Device vendor specific log |
---|
107 | 0xa8 GPL,SL VS 20 Device vendor specific log |
---|
108 | 0xa9 GPL,SL VS 1 Device vendor specific log |
---|
109 | 0xb0 GPL VS 2819 Device vendor specific log |
---|
110 | 0xbe-0xbf GPL VS 65535 Device vendor specific log |
---|
111 | 0xe0 GPL,SL R/W 1 SCT Command/Status |
---|
112 | 0xe1 GPL,SL R/W 1 SCT Data Transfer |
---|
113 | |
---|
114 | SMART Extended Comprehensive Error Log Version: 1 (5 sectors) |
---|
115 | Device Error Count: 248 (device log contains only the most recent 20 errors) |
---|
116 | CR = Command Register |
---|
117 | FEATR = Features Register |
---|
118 | COUNT = Count (was: Sector Count) Register |
---|
119 | LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 |
---|
120 | LH = LBA High (was: Cylinder High) Register ] LBA |
---|
121 | LM = LBA Mid (was: Cylinder Low) Register ] Register |
---|
122 | LL = LBA Low (was: Sector Number) Register ] |
---|
123 | DV = Device (was: Device/Head) Register |
---|
124 | DC = Device Control Register |
---|
125 | ER = Error register |
---|
126 | ST = Status register |
---|
127 | Powered_Up_Time is measured from power on, and printed as |
---|
128 | DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, |
---|
129 | SS=sec, and sss=millisec. It "wraps" after 49.710 days. |
---|
130 | |
---|
131 | Error 248 [7] occurred at disk power-on lifetime: 18290 hours (762 days + 2 hours) |
---|
132 | When the command that caused the error occurred, the device was active or idle. |
---|
133 | |
---|
134 | After command completion occurred, registers were: |
---|
135 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
---|
136 | -- -- -- == -- == == == -- -- -- -- -- |
---|
137 | 40 -- 51 00 00 00 00 3c 00 8c 2e 00 00 Error: WP at LBA = 0x3c008c2e = 1006668846 |
---|
138 | |
---|
139 | Commands leading to the command that caused the error were: |
---|
140 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
---|
141 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
---|
142 | 61 00 00 00 08 00 10 cc 00 c2 f0 40 00 00:37:12.405 WRITE FPDMA QUEUED |
---|
143 | 61 00 00 00 40 00 0d 9c 00 cf 30 40 00 00:37:12.403 WRITE FPDMA QUEUED |
---|
144 | 61 00 00 00 08 00 20 2e 00 f4 40 40 00 00:37:12.403 WRITE FPDMA QUEUED |
---|
145 | 60 00 00 00 08 00 00 3c 00 8c 28 40 00 00:37:12.402 READ FPDMA QUEUED |
---|
146 | 61 00 00 00 10 00 10 cc 00 c2 68 40 00 00:37:12.401 WRITE FPDMA QUEUED |
---|
147 | |
---|
148 | Error 247 [6] occurred at disk power-on lifetime: 18290 hours (762 days + 2 hours) |
---|
149 | When the command that caused the error occurred, the device was active or idle. |
---|
150 | |
---|
151 | After command completion occurred, registers were: |
---|
152 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
---|
153 | -- -- -- == -- == == == -- -- -- -- -- |
---|
154 | 40 -- 51 00 00 00 00 3c 00 8c 2e 00 00 Error: UNC at LBA = 0x3c008c2e = 1006668846 |
---|
155 | |
---|
156 | Commands leading to the command that caused the error were: |
---|
157 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
---|
158 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
---|
159 | 60 00 00 00 90 00 10 79 00 2c 62 40 00 00:37:08.552 READ FPDMA QUEUED |
---|
160 | 60 00 00 00 18 00 10 76 00 2c b2 40 00 00:37:08.552 READ FPDMA QUEUED |
---|
161 | 60 00 00 01 00 00 10 75 00 2c b2 40 00 00:37:08.552 READ FPDMA QUEUED |
---|
162 | 60 00 00 01 00 00 10 74 00 2c b2 40 00 00:37:08.551 READ FPDMA QUEUED |
---|
163 | 60 00 00 01 00 00 10 73 00 2c b2 40 00 00:37:08.551 READ FPDMA QUEUED |
---|
164 | |
---|
165 | Error 246 [5] occurred at disk power-on lifetime: 18290 hours (762 days + 2 hours) |
---|
166 | When the command that caused the error occurred, the device was active or idle. |
---|
167 | |
---|
168 | After command completion occurred, registers were: |
---|
169 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
---|
170 | -- -- -- == -- == == == -- -- -- -- -- |
---|
171 | 40 -- 51 00 00 00 00 3c 00 8c 61 00 00 Error: UNC at LBA = 0x3c008c61 = 1006668897 |
---|
172 | |
---|
173 | Commands leading to the command that caused the error were: |
---|
174 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
---|
175 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
---|
176 | 60 00 00 00 80 00 00 3c 00 8c 88 40 00 00:36:48.591 READ FPDMA QUEUED |
---|
177 | 61 00 00 00 10 00 10 f1 00 14 88 40 00 00:36:47.476 WRITE FPDMA QUEUED |
---|
178 | 60 00 00 00 80 00 00 3c 00 8c 08 40 00 00:36:47.476 READ FPDMA QUEUED |
---|
179 | 60 00 00 00 80 00 00 3b 00 8c 88 40 00 00:36:47.475 READ FPDMA QUEUED |
---|
180 | 61 00 00 00 10 00 10 f1 00 14 98 40 00 00:36:47.457 WRITE FPDMA QUEUED |
---|
181 | |
---|
182 | Error 245 [4] occurred at disk power-on lifetime: 18283 hours (761 days + 19 hours) |
---|
183 | When the command that caused the error occurred, the device was active or idle. |
---|
184 | |
---|
185 | After command completion occurred, registers were: |
---|
186 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
---|
187 | -- -- -- == -- == == == -- -- -- -- -- |
---|
188 | 40 -- 51 00 00 00 00 69 00 81 c3 00 00 Error: UNC at LBA = 0x690081c3 = 1761640899 |
---|
189 | |
---|
190 | Commands leading to the command that caused the error were: |
---|
191 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
---|
192 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
---|
193 | 60 00 00 01 00 00 00 5d 00 81 00 40 00 01:37:11.409 READ FPDMA QUEUED |
---|
194 | 60 00 00 01 00 00 00 56 00 81 00 40 00 01:37:11.026 READ FPDMA QUEUED |
---|
195 | 60 00 00 01 00 00 00 4f 00 81 00 40 00 01:37:10.713 READ FPDMA QUEUED |
---|
196 | 60 00 00 01 00 00 00 4e 00 81 00 40 00 01:37:10.713 READ FPDMA QUEUED |
---|
197 | 60 00 00 01 00 00 00 4d 00 81 00 40 00 01:37:10.713 READ FPDMA QUEUED |
---|
198 | |
---|
199 | Error 244 [3] occurred at disk power-on lifetime: 18282 hours (761 days + 18 hours) |
---|
200 | When the command that caused the error occurred, the device was active or idle. |
---|
201 | |
---|
202 | After command completion occurred, registers were: |
---|
203 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
---|
204 | -- -- -- == -- == == == -- -- -- -- -- |
---|
205 | 40 -- 51 00 00 00 00 e8 00 1d ae 00 00 Error: UNC at LBA = 0xe8001dae = 3892321710 |
---|
206 | |
---|
207 | Commands leading to the command that caused the error were: |
---|
208 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
---|
209 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
---|
210 | 60 00 00 01 00 00 00 df 00 15 00 40 00 00:34:52.481 READ FPDMA QUEUED |
---|
211 | 60 00 00 01 00 00 00 de 00 15 00 40 00 00:34:52.481 READ FPDMA QUEUED |
---|
212 | 60 00 00 01 00 00 00 dd 00 15 00 40 00 00:34:52.481 READ FPDMA QUEUED |
---|
213 | 60 00 00 01 00 00 00 dc 00 15 00 40 00 00:34:52.480 READ FPDMA QUEUED |
---|
214 | 60 00 00 01 00 00 00 db 00 15 00 40 00 00:34:52.480 READ FPDMA QUEUED |
---|
215 | |
---|
216 | Error 243 [2] occurred at disk power-on lifetime: 18281 hours (761 days + 17 hours) |
---|
217 | When the command that caused the error occurred, the device was active or idle. |
---|
218 | |
---|
219 | After command completion occurred, registers were: |
---|
220 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
---|
221 | -- -- -- == -- == == == -- -- -- -- -- |
---|
222 | 40 -- 51 00 00 00 00 4e 00 81 b2 00 00 Error: WP at LBA = 0x4e0081b2 = 1308656050 |
---|
223 | |
---|
224 | Commands leading to the command that caused the error were: |
---|
225 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
---|
226 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
---|
227 | 61 00 00 00 08 00 10 cc 00 c2 d0 40 00 00:01:32.817 WRITE FPDMA QUEUED |
---|
228 | 61 00 00 00 e8 00 0c 99 00 22 e0 40 00 00:01:32.815 WRITE FPDMA QUEUED |
---|
229 | 61 00 00 00 28 00 10 cd 00 c2 30 40 00 00:01:32.814 WRITE FPDMA QUEUED |
---|
230 | 60 00 00 00 20 00 12 b9 00 e6 8e 40 00 00:01:32.789 READ FPDMA QUEUED |
---|
231 | 60 00 00 00 40 00 10 3d 00 26 22 40 00 00:01:32.783 READ FPDMA QUEUED |
---|
232 | |
---|
233 | Error 242 [1] occurred at disk power-on lifetime: 18274 hours (761 days + 10 hours) |
---|
234 | When the command that caused the error occurred, the device was active or idle. |
---|
235 | |
---|
236 | After command completion occurred, registers were: |
---|
237 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
---|
238 | -- -- -- == -- == == == -- -- -- -- -- |
---|
239 | 40 -- 51 00 00 00 00 6a 00 1d 29 00 00 Error: UNC at LBA = 0x6a001d29 = 1778392361 |
---|
240 | |
---|
241 | Commands leading to the command that caused the error were: |
---|
242 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
---|
243 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
---|
244 | 42 00 00 01 00 00 00 6a 00 1d 00 40 00 05:01:39.256 READ VERIFY SECTOR(S) EXT |
---|
245 | 42 00 00 01 00 00 00 d8 00 15 00 e0 00 05:01:36.629 READ VERIFY SECTOR(S) EXT |
---|
246 | 42 00 00 01 00 00 00 f6 00 0f 00 e0 00 05:00:25.271 READ VERIFY SECTOR(S) EXT |
---|
247 | 42 00 00 01 00 00 00 09 00 00 00 e0 00 05:00:20.326 READ VERIFY SECTOR(S) EXT |
---|
248 | 42 00 00 01 00 00 00 08 00 00 00 e0 00 05:00:20.313 READ VERIFY SECTOR(S) EXT |
---|
249 | |
---|
250 | Error 241 [0] occurred at disk power-on lifetime: 18270 hours (761 days + 6 hours) |
---|
251 | When the command that caused the error occurred, the device was active or idle. |
---|
252 | |
---|
253 | After command completion occurred, registers were: |
---|
254 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
---|
255 | -- -- -- == -- == == == -- -- -- -- -- |
---|
256 | 40 -- 51 00 00 00 00 6a 00 1d 29 00 00 Error: UNC at LBA = 0x6a001d29 = 1778392361 |
---|
257 | |
---|
258 | Commands leading to the command that caused the error were: |
---|
259 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
---|
260 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
---|
261 | 60 00 00 00 08 00 00 6a 00 1d 28 40 00 02:11:59.521 READ FPDMA QUEUED |
---|
262 | 60 00 00 00 08 00 00 6a 00 1d 20 40 00 02:11:59.478 READ FPDMA QUEUED |
---|
263 | 2f 00 00 00 01 00 00 00 00 00 10 e0 00 02:11:59.411 READ LOG EXT |
---|
264 | 60 00 00 00 08 00 00 6a 00 1d 08 40 00 02:11:56.498 READ FPDMA QUEUED |
---|
265 | 60 00 00 00 08 00 00 6a 00 1d 00 40 00 02:11:56.373 READ FPDMA QUEUED |
---|
266 | |
---|
267 | Error 240 [19] occurred at disk power-on lifetime: 18270 hours (761 days + 6 hours) |
---|
268 | When the command that caused the error occurred, the device was active or idle. |
---|
269 | |
---|
270 | After command completion occurred, registers were: |
---|
271 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
---|
272 | -- -- -- == -- == == == -- -- -- -- -- |
---|
273 | 40 -- 51 00 00 00 00 6a 00 1d 29 00 00 Error: UNC at LBA = 0x6a001d29 = 1778392361 |
---|
274 | |
---|
275 | Commands leading to the command that caused the error were: |
---|
276 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
---|
277 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
---|
278 | 60 00 00 00 08 00 00 6a 00 1d 08 40 00 02:11:56.498 READ FPDMA QUEUED |
---|
279 | 60 00 00 00 08 00 00 6a 00 1d 00 40 00 02:11:56.373 READ FPDMA QUEUED |
---|
280 | 60 00 00 00 08 00 00 69 00 1d f8 40 00 02:11:56.373 READ FPDMA QUEUED |
---|
281 | 60 00 00 00 08 00 00 69 00 1d a8 40 00 02:11:55.881 READ FPDMA QUEUED |
---|
282 | 60 00 00 00 08 00 00 69 00 1d a0 40 00 02:11:55.830 READ FPDMA QUEUED |
---|
283 | |
---|
284 | Error 239 [18] occurred at disk power-on lifetime: 18270 hours (761 days + 6 hours) |
---|
285 | When the command that caused the error occurred, the device was active or idle. |
---|
286 | |
---|
287 | After command completion occurred, registers were: |
---|
288 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
---|
289 | -- -- -- == -- == == == -- -- -- -- -- |
---|
290 | 40 -- 51 00 00 00 00 6a 00 1d 00 00 00 Error: UNC at LBA = 0x6a001d00 = 1778392320 |
---|
291 | |
---|
292 | Commands leading to the command that caused the error were: |
---|
293 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
---|
294 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
---|
295 | 60 00 00 00 80 00 00 69 00 1d a0 40 00 02:11:52.799 READ FPDMA QUEUED |
---|
296 | 60 00 00 00 80 00 00 69 00 1d 20 40 00 02:11:52.465 READ FPDMA QUEUED |
---|
297 | 60 00 00 00 80 00 00 68 00 1d a0 40 00 02:11:52.452 READ FPDMA QUEUED |
---|
298 | 60 00 00 00 18 00 05 52 00 89 08 40 00 02:11:52.452 READ FPDMA QUEUED |
---|
299 | 60 00 00 00 70 00 0c 37 00 07 e0 40 00 02:11:52.451 READ FPDMA QUEUED |
---|
300 | |
---|
301 | Error 238 [17] occurred at disk power-on lifetime: 18270 hours (761 days + 6 hours) |
---|
302 | When the command that caused the error occurred, the device was active or idle. |
---|
303 | |
---|
304 | After command completion occurred, registers were: |
---|
305 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
---|
306 | -- -- -- == -- == == == -- -- -- -- -- |
---|
307 | 40 -- 51 00 00 00 00 55 00 81 ef 00 00 Error: UNC at LBA = 0x550081ef = 1426096623 |
---|
308 | |
---|
309 | Commands leading to the command that caused the error were: |
---|
310 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
---|
311 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
---|
312 | 60 00 00 01 00 00 00 55 00 81 00 40 00 01:36:03.767 READ FPDMA QUEUED |
---|
313 | 60 00 00 00 02 00 00 55 00 81 04 40 00 01:36:03.724 READ FPDMA QUEUED |
---|
314 | 2f 00 00 00 01 00 00 00 00 00 10 e0 00 01:36:03.648 READ LOG EXT |
---|
315 | 60 00 00 01 00 00 00 55 00 81 00 40 00 01:36:00.661 READ FPDMA QUEUED |
---|
316 | 60 00 00 00 02 00 00 55 00 81 02 40 00 01:36:00.617 READ FPDMA QUEUED |
---|
317 | |
---|
318 | Error 237 [16] occurred at disk power-on lifetime: 18270 hours (761 days + 6 hours) |
---|
319 | When the command that caused the error occurred, the device was active or idle. |
---|
320 | |
---|
321 | After command completion occurred, registers were: |
---|
322 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
---|
323 | -- -- -- == -- == == == -- -- -- -- -- |
---|
324 | 40 -- 51 00 00 00 00 55 00 81 ef 00 00 Error: UNC at LBA = 0x550081ef = 1426096623 |
---|
325 | |
---|
326 | Commands leading to the command that caused the error were: |
---|
327 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
---|
328 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
---|
329 | 60 00 00 01 00 00 00 55 00 81 00 40 00 01:36:00.661 READ FPDMA QUEUED |
---|
330 | 60 00 00 00 02 00 00 55 00 81 02 40 00 01:36:00.617 READ FPDMA QUEUED |
---|
331 | 2f 00 00 00 01 00 00 00 00 00 10 e0 00 01:36:00.541 READ LOG EXT |
---|
332 | 60 00 00 01 00 00 00 55 00 81 00 40 00 01:35:57.554 READ FPDMA QUEUED |
---|
333 | 60 00 00 00 02 00 00 55 00 81 00 40 00 01:35:57.511 READ FPDMA QUEUED |
---|
334 | |
---|
335 | Error 236 [15] occurred at disk power-on lifetime: 18270 hours (761 days + 6 hours) |
---|
336 | When the command that caused the error occurred, the device was active or idle. |
---|
337 | |
---|
338 | After command completion occurred, registers were: |
---|
339 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
---|
340 | -- -- -- == -- == == == -- -- -- -- -- |
---|
341 | 40 -- 51 00 00 00 00 55 00 81 ef 00 00 Error: UNC at LBA = 0x550081ef = 1426096623 |
---|
342 | |
---|
343 | Commands leading to the command that caused the error were: |
---|
344 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
---|
345 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
---|
346 | 60 00 00 01 00 00 00 55 00 81 00 40 00 01:35:57.554 READ FPDMA QUEUED |
---|
347 | 60 00 00 00 02 00 00 55 00 81 00 40 00 01:35:57.511 READ FPDMA QUEUED |
---|
348 | 2f 00 00 00 01 00 00 00 00 00 10 e0 00 01:35:57.426 READ LOG EXT |
---|
349 | 60 00 00 01 00 00 00 55 00 81 00 40 00 01:35:54.495 READ FPDMA QUEUED |
---|
350 | 60 00 00 01 00 00 00 57 00 81 00 40 00 01:35:54.490 READ FPDMA QUEUED |
---|
351 | |
---|
352 | Error 235 [14] occurred at disk power-on lifetime: 18270 hours (761 days + 6 hours) |
---|
353 | When the command that caused the error occurred, the device was active or idle. |
---|
354 | |
---|
355 | After command completion occurred, registers were: |
---|
356 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
---|
357 | -- -- -- == -- == == == -- -- -- -- -- |
---|
358 | 40 -- 51 00 00 00 00 55 00 81 ef 00 00 Error: UNC at LBA = 0x550081ef = 1426096623 |
---|
359 | |
---|
360 | Commands leading to the command that caused the error were: |
---|
361 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
---|
362 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
---|
363 | 60 00 00 01 00 00 00 55 00 81 00 40 00 01:35:54.495 READ FPDMA QUEUED |
---|
364 | 60 00 00 01 00 00 00 57 00 81 00 40 00 01:35:54.490 READ FPDMA QUEUED |
---|
365 | 60 00 00 01 00 00 00 56 00 81 00 40 00 01:35:54.443 READ FPDMA QUEUED |
---|
366 | 2f 00 00 00 01 00 00 00 00 00 10 e0 00 01:35:54.353 READ LOG EXT |
---|
367 | 60 00 00 01 00 00 00 55 00 81 00 40 00 01:35:51.411 READ FPDMA QUEUED |
---|
368 | |
---|
369 | Error 234 [13] occurred at disk power-on lifetime: 18270 hours (761 days + 6 hours) |
---|
370 | When the command that caused the error occurred, the device was active or idle. |
---|
371 | |
---|
372 | After command completion occurred, registers were: |
---|
373 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
---|
374 | -- -- -- == -- == == == -- -- -- -- -- |
---|
375 | 40 -- 51 00 00 00 00 55 00 81 ef 00 00 Error: UNC at LBA = 0x550081ef = 1426096623 |
---|
376 | |
---|
377 | Commands leading to the command that caused the error were: |
---|
378 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
---|
379 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
---|
380 | 60 00 00 01 00 00 00 55 00 81 00 40 00 01:35:51.411 READ FPDMA QUEUED |
---|
381 | 60 00 00 01 00 00 00 fb 00 fd 00 40 00 01:35:51.364 READ FPDMA QUEUED |
---|
382 | 2f 00 00 00 01 00 00 00 00 00 10 e0 00 01:35:51.288 READ LOG EXT |
---|
383 | 60 00 00 01 00 00 00 55 00 81 00 40 00 01:35:48.326 READ FPDMA QUEUED |
---|
384 | 60 00 00 01 00 00 00 53 00 81 00 40 00 01:35:48.321 READ FPDMA QUEUED |
---|
385 | |
---|
386 | Error 233 [12] occurred at disk power-on lifetime: 18270 hours (761 days + 6 hours) |
---|
387 | When the command that caused the error occurred, the device was active or idle. |
---|
388 | |
---|
389 | After command completion occurred, registers were: |
---|
390 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
---|
391 | -- -- -- == -- == == == -- -- -- -- -- |
---|
392 | 40 -- 51 00 00 00 00 55 00 81 ef 00 00 Error: UNC at LBA = 0x550081ef = 1426096623 |
---|
393 | |
---|
394 | Commands leading to the command that caused the error were: |
---|
395 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
---|
396 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
---|
397 | 60 00 00 01 00 00 00 55 00 81 00 40 00 01:35:48.326 READ FPDMA QUEUED |
---|
398 | 60 00 00 01 00 00 00 53 00 81 00 40 00 01:35:48.321 READ FPDMA QUEUED |
---|
399 | 60 00 00 01 00 00 00 52 00 81 00 40 00 01:35:48.320 READ FPDMA QUEUED |
---|
400 | 60 00 00 01 00 00 00 7f 00 89 00 40 00 01:35:48.313 READ FPDMA QUEUED |
---|
401 | 60 00 00 01 00 00 00 3e 00 84 00 40 00 01:35:48.298 READ FPDMA QUEUED |
---|
402 | |
---|
403 | Error 232 [11] occurred at disk power-on lifetime: 18270 hours (761 days + 6 hours) |
---|
404 | When the command that caused the error occurred, the device was active or idle. |
---|
405 | |
---|
406 | After command completion occurred, registers were: |
---|
407 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
---|
408 | -- -- -- == -- == == == -- -- -- -- -- |
---|
409 | 40 -- 51 00 00 00 00 f1 00 80 4f 00 00 Error: UNC at LBA = 0xf100804f = 4043341903 |
---|
410 | |
---|
411 | Commands leading to the command that caused the error were: |
---|
412 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
---|
413 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
---|
414 | 60 00 00 01 00 00 00 f1 00 80 00 40 00 01:35:42.464 READ FPDMA QUEUED |
---|
415 | 60 00 00 00 02 00 00 f1 00 80 de 40 00 01:35:42.418 READ FPDMA QUEUED |
---|
416 | 2f 00 00 00 01 00 00 00 00 00 10 e0 00 01:35:42.342 READ LOG EXT |
---|
417 | 60 00 00 01 00 00 00 f1 00 80 00 40 00 01:35:39.491 READ FPDMA QUEUED |
---|
418 | 60 00 00 00 02 00 00 f1 00 80 dc 40 00 01:35:39.436 READ FPDMA QUEUED |
---|
419 | |
---|
420 | Error 231 [10] occurred at disk power-on lifetime: 18270 hours (761 days + 6 hours) |
---|
421 | When the command that caused the error occurred, the device was active or idle. |
---|
422 | |
---|
423 | After command completion occurred, registers were: |
---|
424 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
---|
425 | -- -- -- == -- == == == -- -- -- -- -- |
---|
426 | 40 -- 51 00 00 00 00 f1 00 80 4e 00 00 Error: UNC at LBA = 0xf100804e = 4043341902 |
---|
427 | |
---|
428 | Commands leading to the command that caused the error were: |
---|
429 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
---|
430 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
---|
431 | 60 00 00 01 00 00 00 f1 00 80 00 40 00 01:35:39.491 READ FPDMA QUEUED |
---|
432 | 60 00 00 00 02 00 00 f1 00 80 dc 40 00 01:35:39.436 READ FPDMA QUEUED |
---|
433 | 2f 00 00 00 01 00 00 00 00 00 10 e0 00 01:35:39.361 READ LOG EXT |
---|
434 | 60 00 00 01 00 00 00 f1 00 80 00 40 00 01:35:36.484 READ FPDMA QUEUED |
---|
435 | 60 00 00 00 02 00 00 f1 00 80 da 40 00 01:35:36.429 READ FPDMA QUEUED |
---|
436 | |
---|
437 | Error 230 [9] occurred at disk power-on lifetime: 18270 hours (761 days + 6 hours) |
---|
438 | When the command that caused the error occurred, the device was active or idle. |
---|
439 | |
---|
440 | After command completion occurred, registers were: |
---|
441 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
---|
442 | -- -- -- == -- == == == -- -- -- -- -- |
---|
443 | 40 -- 51 00 00 00 00 f1 00 80 4e 00 00 Error: UNC at LBA = 0xf100804e = 4043341902 |
---|
444 | |
---|
445 | Commands leading to the command that caused the error were: |
---|
446 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
---|
447 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
---|
448 | 60 00 00 01 00 00 00 f1 00 80 00 40 00 01:35:36.484 READ FPDMA QUEUED |
---|
449 | 60 00 00 00 02 00 00 f1 00 80 da 40 00 01:35:36.429 READ FPDMA QUEUED |
---|
450 | 2f 00 00 00 01 00 00 00 00 00 10 e0 00 01:35:36.345 READ LOG EXT |
---|
451 | 60 00 00 01 00 00 00 f1 00 80 00 40 00 01:35:33.494 READ FPDMA QUEUED |
---|
452 | 60 00 00 00 02 00 00 f1 00 80 d8 40 00 01:35:33.448 READ FPDMA QUEUED |
---|
453 | |
---|
454 | Error 229 [8] occurred at disk power-on lifetime: 18270 hours (761 days + 6 hours) |
---|
455 | When the command that caused the error occurred, the device was active or idle. |
---|
456 | |
---|
457 | After command completion occurred, registers were: |
---|
458 | ER -- ST COUNT LBA_48 LH LM LL DV DC |
---|
459 | -- -- -- == -- == == == -- -- -- -- -- |
---|
460 | 40 -- 51 00 00 00 00 f1 00 80 4e 00 00 Error: UNC at LBA = 0xf100804e = 4043341902 |
---|
461 | |
---|
462 | Commands leading to the command that caused the error were: |
---|
463 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name |
---|
464 | -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- |
---|
465 | 60 00 00 01 00 00 00 f1 00 80 00 40 00 01:35:33.494 READ FPDMA QUEUED |
---|
466 | 60 00 00 00 02 00 00 f1 00 80 d8 40 00 01:35:33.448 READ FPDMA QUEUED |
---|
467 | 2f 00 00 00 01 00 00 00 00 00 10 e0 00 01:35:33.364 READ LOG EXT |
---|
468 | 60 00 00 01 00 00 00 f1 00 80 00 40 00 01:35:30.487 READ FPDMA QUEUED |
---|
469 | 60 00 00 00 02 00 00 f1 00 80 d6 40 00 01:35:30.432 READ FPDMA QUEUED |
---|
470 | |
---|
471 | SMART Extended Self-test Log Version: 1 (1 sectors) |
---|
472 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
---|
473 | # 1 Short offline Completed: read failure 90% 18609 335888 |
---|
474 | # 2 Short offline Interrupted (host reset) 00% 18606 - |
---|
475 | # 3 Short offline Completed: electrical failure 90% 18286 0 |
---|
476 | # 4 Short offline Completed: electrical failure 90% 18284 0 |
---|
477 | # 5 Short offline Completed: electrical failure 90% 18284 0 |
---|
478 | # 6 Short offline Completed: electrical failure 90% 18283 0 |
---|
479 | |
---|
480 | SMART Selective self-test log data structure revision number 1 |
---|
481 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
---|
482 | 1 0 0 Not_testing |
---|
483 | 2 0 0 Not_testing |
---|
484 | 3 0 0 Not_testing |
---|
485 | 4 0 0 Not_testing |
---|
486 | 5 0 0 Not_testing |
---|
487 | Selective self-test flags (0x0): |
---|
488 | After scanning selected spans, do NOT read-scan remainder of disk. |
---|
489 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
---|
490 | |
---|
491 | SCT Status Version: 3 |
---|
492 | SCT Version (vendor specific): 522 (0x020a) |
---|
493 | Device State: Active (0) |
---|
494 | Current Temperature: 40 Celsius |
---|
495 | Power Cycle Min/Max Temperature: 39/40 Celsius |
---|
496 | Lifetime Min/Max Temperature: 8/45 Celsius |
---|
497 | Under/Over Temperature Limit Count: 0/191 |
---|
498 | |
---|
499 | SCT Temperature History Version: 2 |
---|
500 | Temperature Sampling Period: 1 minute |
---|
501 | Temperature Logging Interval: 1 minute |
---|
502 | Min/Max recommended Temperature: 0/ 0 Celsius |
---|
503 | Min/Max Temperature Limit: 0/ 0 Celsius |
---|
504 | Temperature History Size (Index): 128 (60) |
---|
505 | |
---|
506 | Index Estimated Time Temperature Celsius |
---|
507 | 61 2022-02-12 12:02 40 ********************* |
---|
508 | ... ..(112 skipped). .. ********************* |
---|
509 | 46 2022-02-12 13:55 40 ********************* |
---|
510 | 47 2022-02-12 13:56 39 ******************** |
---|
511 | 48 2022-02-12 13:57 39 ******************** |
---|
512 | 49 2022-02-12 13:58 40 ********************* |
---|
513 | ... ..( 3 skipped). .. ********************* |
---|
514 | 53 2022-02-12 14:02 40 ********************* |
---|
515 | 54 2022-02-12 14:03 39 ******************** |
---|
516 | ... ..( 3 skipped). .. ******************** |
---|
517 | 58 2022-02-12 14:07 39 ******************** |
---|
518 | 59 2022-02-12 14:08 40 ********************* |
---|
519 | 60 2022-02-12 14:09 40 ********************* |
---|
520 | |
---|
521 | SCT Error Recovery Control: |
---|
522 | Read: Disabled |
---|
523 | Write: Disabled |
---|
524 | |
---|
525 | Device Statistics (GP/SMART Log 0x04) not supported |
---|
526 | |
---|
527 | SATA Phy Event Counters (GP Log 0x11) |
---|
528 | ID Size Value Description |
---|
529 | 0x000a 2 7 Device-to-host register FISes sent due to a COMRESET |
---|
530 | 0x0001 2 0 Command failed due to ICRC error |
---|
531 | 0x0003 2 0 R_ERR response for device-to-host data FIS |
---|
532 | 0x0004 2 0 R_ERR response for host-to-device data FIS |
---|
533 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
---|
534 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
---|