1 | smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-7-amd64] (local build)
|
---|
2 | Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Model Family: Toshiba 2.5" HDD MQ01ABD...
|
---|
6 | Device Model: TOSHIBA MQ01ABD100
|
---|
7 | Serial Number: 87PSPGCKT
|
---|
8 | LU WWN Device Id: 5 000039 7f2f0a12f
|
---|
9 | Firmware Version: AX1R4C
|
---|
10 | User Capacity: 1,000,204,886,016 bytes [1.00 TB]
|
---|
11 | Sector Sizes: 512 bytes logical, 4096 bytes physical
|
---|
12 | Rotation Rate: 5400 rpm
|
---|
13 | Form Factor: 2.5 inches
|
---|
14 | Device is: In smartctl database [for details use: -P show]
|
---|
15 | ATA Version is: ATA8-ACS (minor revision not indicated)
|
---|
16 | SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
|
---|
17 | Local Time is: Sat Jun 12 20:02:51 2021 EAT
|
---|
18 | SMART support is: Available - device has SMART capability.
|
---|
19 | SMART support is: Enabled
|
---|
20 | AAM feature is: Unavailable
|
---|
21 | APM level is: 254 (maximum performance)
|
---|
22 | Rd look-ahead is: Enabled
|
---|
23 | Write cache is: Enabled
|
---|
24 | DSN feature is: Unavailable
|
---|
25 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
---|
26 |
|
---|
27 | === START OF READ SMART DATA SECTION ===
|
---|
28 | SMART overall-health self-assessment test result: PASSED
|
---|
29 |
|
---|
30 | General SMART Values:
|
---|
31 | Offline data collection status: (0x86) Offline data collection activity
|
---|
32 | was aborted by the device with a fatal error.
|
---|
33 | Auto Offline Data Collection: Enabled.
|
---|
34 | Self-test execution status: ( 121) The previous self-test completed having
|
---|
35 | the read element of the test failed.
|
---|
36 | Total time to complete Offline
|
---|
37 | data collection: ( 120) seconds.
|
---|
38 | Offline data collection
|
---|
39 | capabilities: (0x51) SMART execute Offline immediate.
|
---|
40 | No Auto Offline data collection support.
|
---|
41 | Suspend Offline collection upon new
|
---|
42 | command.
|
---|
43 | No Offline surface scan supported.
|
---|
44 | Self-test supported.
|
---|
45 | No Conveyance Self-test supported.
|
---|
46 | Selective Self-test supported.
|
---|
47 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
48 | power-saving mode.
|
---|
49 | Supports SMART auto save timer.
|
---|
50 | Error logging capability: (0x01) Error logging supported.
|
---|
51 | General Purpose Logging supported.
|
---|
52 | Short self-test routine
|
---|
53 | recommended polling time: ( 2) minutes.
|
---|
54 | Extended self-test routine
|
---|
55 | recommended polling time: ( 199) minutes.
|
---|
56 | SCT capabilities: (0x003d) SCT Status supported.
|
---|
57 | SCT Error Recovery Control supported.
|
---|
58 | SCT Feature Control supported.
|
---|
59 | SCT Data Table supported.
|
---|
60 |
|
---|
61 | SMART Attributes Data Structure revision number: 16
|
---|
62 | Vendor Specific SMART Attributes with Thresholds:
|
---|
63 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
64 | 1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0
|
---|
65 | 2 Throughput_Performance POS--K 100 100 050 - 0
|
---|
66 | 3 Spin_Up_Time PO---K 100 100 002 - 1762
|
---|
67 | 4 Start_Stop_Count -O--CK 100 100 000 - 3079
|
---|
68 | 5 Reallocated_Sector_Ct PO--CK 099 099 010 - 320
|
---|
69 | 7 Seek_Error_Rate POSR-K 100 100 050 - 0
|
---|
70 | 8 Seek_Time_Performance P-S--K 100 100 050 - 0
|
---|
71 | 9 Power_On_Hours -O--CK 058 058 000 - 17023
|
---|
72 | 10 Spin_Retry_Count PO--CK 161 100 030 - 0
|
---|
73 | 12 Power_Cycle_Count -O--CK 100 100 000 - 2919
|
---|
74 | 183 Runtime_Bad_Block -O--CK 100 100 001 - 0
|
---|
75 | 184 End-to-End_Error PO--CK 100 100 097 - 0
|
---|
76 | 185 Unknown_Attribute -O--CK 100 100 001 - 65535
|
---|
77 | 187 Reported_Uncorrect -O--CK 001 001 000 - 1653
|
---|
78 | 188 Command_Timeout -O--CK 100 100 000 - 0
|
---|
79 | 189 High_Fly_Writes -O-RCK 100 100 001 - 0
|
---|
80 | 190 Airflow_Temperature_Cel -O---K 067 052 040 - 33 (Min/Max 28/42)
|
---|
81 | 191 G-Sense_Error_Rate -O--CK 100 100 000 - 213
|
---|
82 | 192 Power-Off_Retract_Count -O---K 100 100 000 - 5308497
|
---|
83 | 193 Load_Cycle_Count -O--CK 100 100 000 - 5737
|
---|
84 | 194 Temperature_Celsius -O---K 067 052 040 - 33 (Min/Max 28/42)
|
---|
85 | 196 Reallocated_Event_Count -O--CK 100 100 000 - 36
|
---|
86 | 197 Current_Pending_Sector -O--CK 100 100 000 - 0
|
---|
87 | 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
|
---|
88 | ||||||_ K auto-keep
|
---|
89 | |||||__ C event count
|
---|
90 | ||||___ R error rate
|
---|
91 | |||____ S speed/performance
|
---|
92 | ||_____ O updated online
|
---|
93 | |______ P prefailure warning
|
---|
94 |
|
---|
95 | General Purpose Log Directory Version 1
|
---|
96 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
97 | Address Access R/W Size Description
|
---|
98 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
99 | 0x01 SL R/O 1 Summary SMART error log
|
---|
100 | 0x02 SL R/O 51 Comprehensive SMART error log
|
---|
101 | 0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
---|
102 | 0x04 GPL,SL R/O 8 Device Statistics log
|
---|
103 | 0x06 SL R/O 1 SMART self-test log
|
---|
104 | 0x07 GPL R/O 1 Extended self-test log
|
---|
105 | 0x09 SL R/W 1 Selective self-test log
|
---|
106 | 0x10 GPL R/O 1 NCQ Command Error log
|
---|
107 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
---|
108 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
109 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
---|
110 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
---|
111 |
|
---|
112 | SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
---|
113 | Device Error Count: 1653 (device log contains only the most recent 256 errors)
|
---|
114 | CR = Command Register
|
---|
115 | FEATR = Features Register
|
---|
116 | COUNT = Count (was: Sector Count) Register
|
---|
117 | LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
---|
118 | LH = LBA High (was: Cylinder High) Register ] LBA
|
---|
119 | LM = LBA Mid (was: Cylinder Low) Register ] Register
|
---|
120 | LL = LBA Low (was: Sector Number) Register ]
|
---|
121 | DV = Device (was: Device/Head) Register
|
---|
122 | DC = Device Control Register
|
---|
123 | ER = Error register
|
---|
124 | ST = Status register
|
---|
125 | Powered_Up_Time is measured from power on, and printed as
|
---|
126 | DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
---|
127 | SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
---|
128 |
|
---|
129 | Error 1653 [116] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
130 | When the command that caused the error occurred, the device was active or idle.
|
---|
131 |
|
---|
132 | After command completion occurred, registers were:
|
---|
133 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
134 | -- -- -- == -- == == == -- -- -- -- --
|
---|
135 | 40 -- 41 00 d0 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
136 |
|
---|
137 | Commands leading to the command that caused the error were:
|
---|
138 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
139 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
140 | 60 00 f8 00 d8 00 00 0c 7f f6 86 40 00 01:02:19.290 READ FPDMA QUEUED
|
---|
141 | 60 00 08 00 d0 00 00 0c 7f f6 06 40 00 01:02:19.290 READ FPDMA QUEUED
|
---|
142 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 01:02:19.282 SET FEATURES [Enable SATA feature]
|
---|
143 | ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:02:19.281 IDENTIFY DEVICE
|
---|
144 | ef 00 03 00 45 00 00 00 00 00 00 a0 00 01:02:19.281 SET FEATURES [Set transfer mode]
|
---|
145 |
|
---|
146 | Error 1652 [115] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
147 | When the command that caused the error occurred, the device was active or idle.
|
---|
148 |
|
---|
149 | After command completion occurred, registers were:
|
---|
150 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
151 | -- -- -- == -- == == == -- -- -- -- --
|
---|
152 | 40 -- 41 00 28 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
153 |
|
---|
154 | Commands leading to the command that caused the error were:
|
---|
155 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
156 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
157 | 60 00 f8 00 30 00 00 0c 7f f6 86 40 00 01:02:19.070 READ FPDMA QUEUED
|
---|
158 | 60 00 08 00 28 00 00 0c 7f f6 06 40 00 01:02:19.070 READ FPDMA QUEUED
|
---|
159 | ef 00 10 00 03 00 00 00 00 00 00 a0 00 01:02:19.058 SET FEATURES [Enable SATA feature]
|
---|
160 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 01:02:19.046 SET FEATURES [Enable SATA feature]
|
---|
161 | ec 00 00 00 00 00 00 00 00 00 00 a0 00 01:02:19.045 IDENTIFY DEVICE
|
---|
162 |
|
---|
163 | Error 1651 [114] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
164 | When the command that caused the error occurred, the device was active or idle.
|
---|
165 |
|
---|
166 | After command completion occurred, registers were:
|
---|
167 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
168 | -- -- -- == -- == == == -- -- -- -- --
|
---|
169 | 40 -- 41 00 f8 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
170 |
|
---|
171 | Commands leading to the command that caused the error were:
|
---|
172 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
173 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
174 | 60 00 f8 00 00 00 00 0c 7f f6 86 40 00 01:02:18.597 READ FPDMA QUEUED
|
---|
175 | 60 00 78 00 f8 00 00 0c 7f f6 06 40 00 01:02:18.597 READ FPDMA QUEUED
|
---|
176 | 60 00 30 00 b8 00 00 0c 7f f5 c6 40 00 01:02:18.597 READ FPDMA QUEUED
|
---|
177 | 60 00 10 00 b0 00 00 0c 7f f5 a6 40 00 01:02:18.597 READ FPDMA QUEUED
|
---|
178 | 60 00 08 00 a8 00 00 0c 7f f5 8e 40 00 01:02:18.597 READ FPDMA QUEUED
|
---|
179 |
|
---|
180 | Error 1650 [113] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
181 | When the command that caused the error occurred, the device was active or idle.
|
---|
182 |
|
---|
183 | After command completion occurred, registers were:
|
---|
184 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
185 | -- -- -- == -- == == == -- -- -- -- --
|
---|
186 | 40 -- 41 00 08 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
187 |
|
---|
188 | Commands leading to the command that caused the error were:
|
---|
189 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
190 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
191 | 60 00 20 00 50 00 00 0c 94 a6 1e 40 00 01:02:04.069 READ FPDMA QUEUED
|
---|
192 | 60 00 02 00 08 00 00 0c 7f f6 06 40 00 01:02:04.060 READ FPDMA QUEUED
|
---|
193 | 60 00 02 00 18 00 00 0c 7f f6 0c 40 00 01:02:04.027 READ FPDMA QUEUED
|
---|
194 | 60 01 00 00 10 00 00 0c 95 89 1e 40 00 01:02:04.027 READ FPDMA QUEUED
|
---|
195 | 60 00 60 00 08 00 00 0c 7f f6 1e 40 00 01:02:04.027 READ FPDMA QUEUED
|
---|
196 |
|
---|
197 | Error 1649 [112] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
198 | When the command that caused the error occurred, the device was active or idle.
|
---|
199 |
|
---|
200 | After command completion occurred, registers were:
|
---|
201 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
202 | -- -- -- == -- == == == -- -- -- -- --
|
---|
203 | 40 -- 41 00 e0 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
204 |
|
---|
205 | Commands leading to the command that caused the error were:
|
---|
206 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
207 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
208 | 60 01 00 00 48 00 00 0c 95 89 1e 40 00 01:02:03.896 READ FPDMA QUEUED
|
---|
209 | 60 00 02 00 00 00 00 0c 7f f6 0c 40 00 01:02:03.872 READ FPDMA QUEUED
|
---|
210 | 60 00 02 00 f0 00 00 0c 7f f6 0a 40 00 01:02:03.872 READ FPDMA QUEUED
|
---|
211 | 60 00 02 00 e8 00 00 0c 7f f6 08 40 00 01:02:03.872 READ FPDMA QUEUED
|
---|
212 | 60 00 02 00 e0 00 00 0c 7f f6 06 40 00 01:02:03.872 READ FPDMA QUEUED
|
---|
213 |
|
---|
214 | Error 1648 [111] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
215 | When the command that caused the error occurred, the device was active or idle.
|
---|
216 |
|
---|
217 | After command completion occurred, registers were:
|
---|
218 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
219 | -- -- -- == -- == == == -- -- -- -- --
|
---|
220 | 40 -- 41 00 b0 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
221 |
|
---|
222 | Commands leading to the command that caused the error were:
|
---|
223 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
224 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
225 | 60 00 20 00 b0 00 00 0c 7f f5 fe 40 00 01:02:03.383 READ FPDMA QUEUED
|
---|
226 | 60 00 08 00 a8 00 00 0c 7f f5 fe 40 00 01:02:03.383 READ FPDMA QUEUED
|
---|
227 | 60 00 08 00 a0 00 00 0c 7f f5 fe 40 00 01:02:03.078 READ FPDMA QUEUED
|
---|
228 | 60 02 00 00 98 00 00 0c e1 54 66 40 00 01:00:26.781 READ FPDMA QUEUED
|
---|
229 | 60 02 00 00 90 00 00 0c fd 8d c6 40 00 01:00:26.765 READ FPDMA QUEUED
|
---|
230 |
|
---|
231 | Error 1647 [110] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
232 | When the command that caused the error occurred, the device was active or idle.
|
---|
233 |
|
---|
234 | After command completion occurred, registers were:
|
---|
235 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
236 | -- -- -- == -- == == == -- -- -- -- --
|
---|
237 | 40 -- 41 00 20 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
238 |
|
---|
239 | Commands leading to the command that caused the error were:
|
---|
240 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
241 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
242 | 60 00 20 00 20 00 00 0c 7f f5 fe 40 00 01:00:13.691 READ FPDMA QUEUED
|
---|
243 | 60 00 08 00 18 00 00 0c 7f f5 fe 40 00 01:00:13.691 READ FPDMA QUEUED
|
---|
244 | 60 00 08 00 10 00 00 0c 7f f5 fe 40 00 01:00:13.690 READ FPDMA QUEUED
|
---|
245 | ea 00 00 00 00 00 00 00 00 00 00 a0 00 01:00:11.637 FLUSH CACHE EXT
|
---|
246 | 61 00 08 00 a0 00 00 0c 81 f5 7e 40 00 01:00:11.637 WRITE FPDMA QUEUED
|
---|
247 |
|
---|
248 | Error 1646 [109] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
249 | When the command that caused the error occurred, the device was active or idle.
|
---|
250 |
|
---|
251 | After command completion occurred, registers were:
|
---|
252 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
253 | -- -- -- == -- == == == -- -- -- -- --
|
---|
254 | 40 -- 41 00 88 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
255 |
|
---|
256 | Commands leading to the command that caused the error were:
|
---|
257 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
258 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
259 | 60 00 20 00 88 00 00 0c 7f f5 fe 40 00 00:59:18.196 READ FPDMA QUEUED
|
---|
260 | 60 00 08 00 80 00 00 0c 7f f5 fe 40 00 00:59:18.174 READ FPDMA QUEUED
|
---|
261 | 60 01 00 00 78 00 00 07 e1 89 c9 40 00 00:59:18.163 READ FPDMA QUEUED
|
---|
262 | 60 00 20 00 70 00 00 07 e1 89 a9 40 00 00:59:18.154 READ FPDMA QUEUED
|
---|
263 | 60 00 20 00 68 00 00 07 95 0a 79 40 00 00:59:18.146 READ FPDMA QUEUED
|
---|
264 |
|
---|
265 | Error 1645 [108] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
266 | When the command that caused the error occurred, the device was active or idle.
|
---|
267 |
|
---|
268 | After command completion occurred, registers were:
|
---|
269 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
270 | -- -- -- == -- == == == -- -- -- -- --
|
---|
271 | 40 -- 41 00 78 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
272 |
|
---|
273 | Commands leading to the command that caused the error were:
|
---|
274 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
275 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
276 | 60 00 08 00 78 00 00 0c 7f f6 06 40 00 00:55:07.838 READ FPDMA QUEUED
|
---|
277 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:55:07.831 SET FEATURES [Enable SATA feature]
|
---|
278 | ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:55:07.830 IDENTIFY DEVICE
|
---|
279 | ef 00 03 00 45 00 00 00 00 00 00 a0 00 00:55:07.830 SET FEATURES [Set transfer mode]
|
---|
280 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:55:07.830 SET FEATURES [Enable SATA feature]
|
---|
281 |
|
---|
282 | Error 1644 [107] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
283 | When the command that caused the error occurred, the device was active or idle.
|
---|
284 |
|
---|
285 | After command completion occurred, registers were:
|
---|
286 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
287 | -- -- -- == -- == == == -- -- -- -- --
|
---|
288 | 40 -- 41 00 98 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
289 |
|
---|
290 | Commands leading to the command that caused the error were:
|
---|
291 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
292 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
293 | 60 00 08 00 98 00 00 0c 7f f6 06 40 00 00:55:07.692 READ FPDMA QUEUED
|
---|
294 | ef 00 10 00 03 00 00 00 00 00 00 a0 00 00:55:01.725 SET FEATURES [Enable SATA feature]
|
---|
295 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:55:01.712 SET FEATURES [Enable SATA feature]
|
---|
296 | ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:55:01.710 IDENTIFY DEVICE
|
---|
297 | ef 00 03 00 45 00 00 00 00 00 00 a0 00 00:55:01.710 SET FEATURES [Set transfer mode]
|
---|
298 |
|
---|
299 | Error 1643 [106] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
300 | When the command that caused the error occurred, the device was active or idle.
|
---|
301 |
|
---|
302 | After command completion occurred, registers were:
|
---|
303 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
304 | -- -- -- == -- == == == -- -- -- -- --
|
---|
305 | 40 -- 41 00 08 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
306 |
|
---|
307 | Commands leading to the command that caused the error were:
|
---|
308 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
309 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
310 | 60 00 08 00 08 00 00 0c 7f f6 06 40 00 00:55:01.230 READ FPDMA QUEUED
|
---|
311 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:55:01.224 SET FEATURES [Enable SATA feature]
|
---|
312 | ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:55:01.223 IDENTIFY DEVICE
|
---|
313 | ef 00 03 00 45 00 00 00 00 00 00 a0 00 00:55:01.222 SET FEATURES [Set transfer mode]
|
---|
314 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:55:01.222 SET FEATURES [Enable SATA feature]
|
---|
315 |
|
---|
316 | Error 1642 [105] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
317 | When the command that caused the error occurred, the device was active or idle.
|
---|
318 |
|
---|
319 | After command completion occurred, registers were:
|
---|
320 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
321 | -- -- -- == -- == == == -- -- -- -- --
|
---|
322 | 40 -- 41 00 88 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
323 |
|
---|
324 | Commands leading to the command that caused the error were:
|
---|
325 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
326 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
327 | 60 00 08 00 88 00 00 0c 7f f6 06 40 00 00:55:00.813 READ FPDMA QUEUED
|
---|
328 | 61 00 08 00 80 00 00 15 41 26 18 40 00 00:53:39.644 WRITE FPDMA QUEUED
|
---|
329 | 61 00 08 00 78 00 00 15 40 57 a8 40 00 00:53:39.595 WRITE FPDMA QUEUED
|
---|
330 | ef 00 10 00 03 00 00 00 00 00 00 a0 00 00:53:10.009 SET FEATURES [Enable SATA feature]
|
---|
331 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:53:09.994 SET FEATURES [Enable SATA feature]
|
---|
332 |
|
---|
333 | Error 1641 [104] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
334 | When the command that caused the error occurred, the device was active or idle.
|
---|
335 |
|
---|
336 | After command completion occurred, registers were:
|
---|
337 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
338 | -- -- -- == -- == == == -- -- -- -- --
|
---|
339 | 40 -- 41 00 80 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
340 |
|
---|
341 | Commands leading to the command that caused the error were:
|
---|
342 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
343 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
344 | 60 00 08 00 80 00 00 0c 7f f6 06 40 00 00:53:09.488 READ FPDMA QUEUED
|
---|
345 | ef 00 10 00 03 00 00 00 00 00 00 a0 00 00:53:09.464 SET FEATURES [Enable SATA feature]
|
---|
346 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:53:09.450 SET FEATURES [Enable SATA feature]
|
---|
347 | ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:53:09.449 IDENTIFY DEVICE
|
---|
348 | ef 00 03 00 45 00 00 00 00 00 00 a0 00 00:53:09.448 SET FEATURES [Set transfer mode]
|
---|
349 |
|
---|
350 | Error 1640 [103] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
351 | When the command that caused the error occurred, the device was active or idle.
|
---|
352 |
|
---|
353 | After command completion occurred, registers were:
|
---|
354 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
355 | -- -- -- == -- == == == -- -- -- -- --
|
---|
356 | 40 -- 41 00 50 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
357 |
|
---|
358 | Commands leading to the command that caused the error were:
|
---|
359 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
360 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
361 | 60 00 08 00 50 00 00 0c 7f f6 06 40 00 00:53:08.934 READ FPDMA QUEUED
|
---|
362 | 61 00 18 00 48 00 00 15 41 26 10 40 00 00:52:47.656 WRITE FPDMA QUEUED
|
---|
363 | 61 00 08 00 38 00 00 15 40 57 a8 40 00 00:52:47.656 WRITE FPDMA QUEUED
|
---|
364 | 61 00 08 00 30 00 00 15 3f e8 28 40 00 00:52:47.627 WRITE FPDMA QUEUED
|
---|
365 | ef 00 10 00 03 00 00 00 00 00 00 a0 00 00:52:47.240 SET FEATURES [Enable SATA feature]
|
---|
366 |
|
---|
367 | Error 1639 [102] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
368 | When the command that caused the error occurred, the device was active or idle.
|
---|
369 |
|
---|
370 | After command completion occurred, registers were:
|
---|
371 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
372 | -- -- -- == -- == == == -- -- -- -- --
|
---|
373 | 40 -- 41 00 a0 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
374 |
|
---|
375 | Commands leading to the command that caused the error were:
|
---|
376 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
377 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
378 | 60 00 08 00 a0 00 00 0c 7f f6 06 40 00 00:52:46.731 READ FPDMA QUEUED
|
---|
379 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:52:46.725 SET FEATURES [Enable SATA feature]
|
---|
380 | ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:52:46.724 IDENTIFY DEVICE
|
---|
381 | ef 00 03 00 45 00 00 00 00 00 00 a0 00 00:52:46.723 SET FEATURES [Set transfer mode]
|
---|
382 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:52:46.723 SET FEATURES [Enable SATA feature]
|
---|
383 |
|
---|
384 | Error 1638 [101] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
385 | When the command that caused the error occurred, the device was active or idle.
|
---|
386 |
|
---|
387 | After command completion occurred, registers were:
|
---|
388 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
389 | -- -- -- == -- == == == -- -- -- -- --
|
---|
390 | 40 -- 41 00 20 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
391 |
|
---|
392 | Commands leading to the command that caused the error were:
|
---|
393 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
394 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
395 | 60 00 08 00 20 00 00 0c 7f f6 06 40 00 00:52:46.601 READ FPDMA QUEUED
|
---|
396 | 60 00 08 00 18 00 00 15 3f e8 68 40 00 00:52:22.641 READ FPDMA QUEUED
|
---|
397 | 60 00 20 00 10 00 00 15 3f e8 78 40 00 00:52:22.641 READ FPDMA QUEUED
|
---|
398 | 60 00 08 00 08 00 00 15 3f e8 70 40 00 00:52:22.610 READ FPDMA QUEUED
|
---|
399 | ea 00 00 00 00 00 00 00 00 00 00 a0 00 00:52:20.541 FLUSH CACHE EXT
|
---|
400 |
|
---|
401 | Error 1637 [100] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
402 | When the command that caused the error occurred, the device was active or idle.
|
---|
403 |
|
---|
404 | After command completion occurred, registers were:
|
---|
405 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
406 | -- -- -- == -- == == == -- -- -- -- --
|
---|
407 | 40 -- 41 00 18 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
408 |
|
---|
409 | Commands leading to the command that caused the error were:
|
---|
410 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
411 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
412 | 60 00 08 00 18 00 00 0c 7f f6 06 40 00 00:52:16.985 READ FPDMA QUEUED
|
---|
413 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:52:16.978 SET FEATURES [Enable SATA feature]
|
---|
414 | ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:52:16.977 IDENTIFY DEVICE
|
---|
415 | ef 00 03 00 45 00 00 00 00 00 00 a0 00 00:52:16.977 SET FEATURES [Set transfer mode]
|
---|
416 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:52:16.976 SET FEATURES [Enable SATA feature]
|
---|
417 |
|
---|
418 | Error 1636 [99] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
419 | When the command that caused the error occurred, the device was active or idle.
|
---|
420 |
|
---|
421 | After command completion occurred, registers were:
|
---|
422 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
423 | -- -- -- == -- == == == -- -- -- -- --
|
---|
424 | 40 -- 41 00 f0 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
425 |
|
---|
426 | Commands leading to the command that caused the error were:
|
---|
427 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
428 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
429 | 60 00 08 00 f0 00 00 0c 7f f6 06 40 00 00:52:16.846 READ FPDMA QUEUED
|
---|
430 | 60 00 08 00 e8 00 00 15 3f e8 28 40 00 00:52:16.832 READ FPDMA QUEUED
|
---|
431 | 60 00 08 00 e0 00 00 15 41 26 10 40 00 00:52:16.832 READ FPDMA QUEUED
|
---|
432 | 60 00 08 00 d8 00 00 15 40 57 a8 40 00 00:52:16.827 READ FPDMA QUEUED
|
---|
433 | 60 00 40 00 d0 00 00 15 41 26 38 40 00 00:52:16.827 READ FPDMA QUEUED
|
---|
434 |
|
---|
435 | Error 1635 [98] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
436 | When the command that caused the error occurred, the device was active or idle.
|
---|
437 |
|
---|
438 | After command completion occurred, registers were:
|
---|
439 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
440 | -- -- -- == -- == == == -- -- -- -- --
|
---|
441 | 40 -- 41 00 30 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
442 |
|
---|
443 | Commands leading to the command that caused the error were:
|
---|
444 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
445 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
446 | 60 00 08 00 30 00 00 0c 7f f6 06 40 00 00:51:41.270 READ FPDMA QUEUED
|
---|
447 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:51:41.268 SET FEATURES [Enable SATA feature]
|
---|
448 | ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:51:41.267 IDENTIFY DEVICE
|
---|
449 | ef 00 03 00 45 00 00 00 00 00 00 a0 00 00:51:41.266 SET FEATURES [Set transfer mode]
|
---|
450 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:51:41.266 SET FEATURES [Enable SATA feature]
|
---|
451 |
|
---|
452 | Error 1634 [97] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
453 | When the command that caused the error occurred, the device was active or idle.
|
---|
454 |
|
---|
455 | After command completion occurred, registers were:
|
---|
456 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
457 | -- -- -- == -- == == == -- -- -- -- --
|
---|
458 | 40 -- 41 00 98 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
459 |
|
---|
460 | Commands leading to the command that caused the error were:
|
---|
461 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
462 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
463 | 60 00 08 00 98 00 00 0c 7f f6 06 40 00 00:51:41.120 READ FPDMA QUEUED
|
---|
464 | 61 00 08 00 90 00 00 07 ed d6 79 40 00 00:51:39.030 WRITE FPDMA QUEUED
|
---|
465 | 61 00 10 00 88 00 00 07 ef 4b e9 40 00 00:51:39.030 WRITE FPDMA QUEUED
|
---|
466 | 61 00 08 00 80 00 00 07 c5 a4 a9 40 00 00:51:39.030 WRITE FPDMA QUEUED
|
---|
467 | 61 00 10 00 78 00 00 07 c5 b9 91 40 00 00:51:39.020 WRITE FPDMA QUEUED
|
---|
468 |
|
---|
469 | Error 1633 [96] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
470 | When the command that caused the error occurred, the device was active or idle.
|
---|
471 |
|
---|
472 | After command completion occurred, registers were:
|
---|
473 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
474 | -- -- -- == -- == == == -- -- -- -- --
|
---|
475 | 40 -- 41 00 60 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
476 |
|
---|
477 | Commands leading to the command that caused the error were:
|
---|
478 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
479 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
480 | 60 00 08 00 60 00 00 0c 7f f6 06 40 00 00:48:23.418 READ FPDMA QUEUED
|
---|
481 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:48:23.412 SET FEATURES [Enable SATA feature]
|
---|
482 | ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:48:23.411 IDENTIFY DEVICE
|
---|
483 | ef 00 03 00 45 00 00 00 00 00 00 a0 00 00:48:23.410 SET FEATURES [Set transfer mode]
|
---|
484 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:48:23.410 SET FEATURES [Enable SATA feature]
|
---|
485 |
|
---|
486 | Error 1632 [95] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
487 | When the command that caused the error occurred, the device was active or idle.
|
---|
488 |
|
---|
489 | After command completion occurred, registers were:
|
---|
490 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
491 | -- -- -- == -- == == == -- -- -- -- --
|
---|
492 | 40 -- 41 00 b0 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
493 |
|
---|
494 | Commands leading to the command that caused the error were:
|
---|
495 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
496 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
497 | 60 00 08 00 b0 00 00 0c 7f f6 06 40 00 00:48:23.258 READ FPDMA QUEUED
|
---|
498 | 61 00 08 00 48 00 00 07 c5 a4 a9 40 00 00:48:15.975 WRITE FPDMA QUEUED
|
---|
499 | 61 00 10 00 40 00 00 07 c1 ef a9 40 00 00:48:15.719 WRITE FPDMA QUEUED
|
---|
500 | 60 00 51 00 a8 00 00 00 10 ac b6 40 00 00:48:13.455 READ FPDMA QUEUED
|
---|
501 | 60 00 a8 00 a0 00 00 00 10 ac 0e 40 00 00:48:13.455 READ FPDMA QUEUED
|
---|
502 |
|
---|
503 | Error 1631 [94] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
504 | When the command that caused the error occurred, the device was active or idle.
|
---|
505 |
|
---|
506 | After command completion occurred, registers were:
|
---|
507 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
508 | -- -- -- == -- == == == -- -- -- -- --
|
---|
509 | 40 -- 41 00 e8 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
510 |
|
---|
511 | Commands leading to the command that caused the error were:
|
---|
512 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
513 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
514 | 60 00 08 00 e8 00 00 0c 7f f6 06 40 00 00:48:04.089 READ FPDMA QUEUED
|
---|
515 | ef 00 10 00 03 00 00 00 00 00 00 a0 00 00:48:04.080 SET FEATURES [Enable SATA feature]
|
---|
516 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:48:04.067 SET FEATURES [Enable SATA feature]
|
---|
517 | ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:48:04.066 IDENTIFY DEVICE
|
---|
518 | ef 00 03 00 45 00 00 00 00 00 00 a0 00 00:48:04.065 SET FEATURES [Set transfer mode]
|
---|
519 |
|
---|
520 | Error 1630 [93] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
521 | When the command that caused the error occurred, the device was active or idle.
|
---|
522 |
|
---|
523 | After command completion occurred, registers were:
|
---|
524 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
525 | -- -- -- == -- == == == -- -- -- -- --
|
---|
526 | 40 -- 41 00 28 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
527 |
|
---|
528 | Commands leading to the command that caused the error were:
|
---|
529 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
530 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
531 | 60 00 08 00 28 00 00 0c 7f f6 06 40 00 00:48:03.577 READ FPDMA QUEUED
|
---|
532 | ef 00 10 00 03 00 00 00 00 00 00 a0 00 00:48:03.558 SET FEATURES [Enable SATA feature]
|
---|
533 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:48:03.544 SET FEATURES [Enable SATA feature]
|
---|
534 | ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:48:03.543 IDENTIFY DEVICE
|
---|
535 | ef 00 03 00 45 00 00 00 00 00 00 a0 00 00:48:03.543 SET FEATURES [Set transfer mode]
|
---|
536 |
|
---|
537 | Error 1629 [92] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
538 | When the command that caused the error occurred, the device was active or idle.
|
---|
539 |
|
---|
540 | After command completion occurred, registers were:
|
---|
541 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
542 | -- -- -- == -- == == == -- -- -- -- --
|
---|
543 | 40 -- 41 00 f8 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
544 |
|
---|
545 | Commands leading to the command that caused the error were:
|
---|
546 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
547 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
548 | 60 00 f8 00 00 00 00 0c 7f f6 86 40 00 00:48:02.981 READ FPDMA QUEUED
|
---|
549 | 60 00 78 00 f8 00 00 0c 7f f6 06 40 00 00:48:02.980 READ FPDMA QUEUED
|
---|
550 | 60 00 30 00 d0 00 00 0c 7f f5 c6 40 00 00:48:02.980 READ FPDMA QUEUED
|
---|
551 | 60 00 10 00 b8 00 00 0c 7f f5 a6 40 00 00:48:02.980 READ FPDMA QUEUED
|
---|
552 | 60 00 08 00 b0 00 00 0c 7f f5 8e 40 00 00:48:02.980 READ FPDMA QUEUED
|
---|
553 |
|
---|
554 | Error 1628 [91] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
555 | When the command that caused the error occurred, the device was active or idle.
|
---|
556 |
|
---|
557 | After command completion occurred, registers were:
|
---|
558 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
559 | -- -- -- == -- == == == -- -- -- -- --
|
---|
560 | 40 -- 41 00 00 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
561 |
|
---|
562 | Commands leading to the command that caused the error were:
|
---|
563 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
564 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
565 | 60 00 20 00 50 00 00 08 be 07 71 40 00 00:47:41.365 READ FPDMA QUEUED
|
---|
566 | 60 00 08 00 48 00 00 10 3f e8 80 40 00 00:47:41.365 READ FPDMA QUEUED
|
---|
567 | 60 00 f8 00 40 00 00 0c 7f f6 86 40 00 00:47:41.365 READ FPDMA QUEUED
|
---|
568 | 60 01 50 00 38 00 00 08 d1 c2 39 40 00 00:47:41.365 READ FPDMA QUEUED
|
---|
569 | 60 00 80 00 30 00 00 08 d1 c1 b9 40 00 00:47:41.365 READ FPDMA QUEUED
|
---|
570 |
|
---|
571 | Error 1627 [90] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
572 | When the command that caused the error occurred, the device was active or idle.
|
---|
573 |
|
---|
574 | After command completion occurred, registers were:
|
---|
575 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
576 | -- -- -- == -- == == == -- -- -- -- --
|
---|
577 | 40 -- 41 00 b0 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
578 |
|
---|
579 | Commands leading to the command that caused the error were:
|
---|
580 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
581 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
582 | 60 00 08 00 38 00 00 00 00 08 38 40 00 00:47:40.829 READ FPDMA QUEUED
|
---|
583 | 60 00 08 00 30 00 00 00 13 a7 f0 40 00 00:47:40.829 READ FPDMA QUEUED
|
---|
584 | 60 00 08 00 28 00 00 00 74 28 00 40 00 00:47:40.829 READ FPDMA QUEUED
|
---|
585 | 60 00 80 00 20 00 00 08 d1 c1 b9 40 00 00:47:40.829 READ FPDMA QUEUED
|
---|
586 | 60 01 50 00 18 00 00 08 d1 c2 39 40 00 00:47:40.829 READ FPDMA QUEUED
|
---|
587 |
|
---|
588 | Error 1626 [89] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
589 | When the command that caused the error occurred, the device was active or idle.
|
---|
590 |
|
---|
591 | After command completion occurred, registers were:
|
---|
592 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
593 | -- -- -- == -- == == == -- -- -- -- --
|
---|
594 | 40 -- 41 00 68 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
595 |
|
---|
596 | Commands leading to the command that caused the error were:
|
---|
597 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
598 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
599 | 60 00 20 00 80 00 00 08 be 07 71 40 00 00:47:40.307 READ FPDMA QUEUED
|
---|
600 | 60 00 f8 00 70 00 00 0c 7f f6 86 40 00 00:47:40.279 READ FPDMA QUEUED
|
---|
601 | 60 00 78 00 68 00 00 0c 7f f6 06 40 00 00:47:40.279 READ FPDMA QUEUED
|
---|
602 | 60 00 30 00 48 00 00 0c 7f f5 c6 40 00 00:47:40.279 READ FPDMA QUEUED
|
---|
603 | 60 00 10 00 40 00 00 0c 7f f5 a6 40 00 00:47:40.279 READ FPDMA QUEUED
|
---|
604 |
|
---|
605 | Error 1625 [88] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
606 | When the command that caused the error occurred, the device was active or idle.
|
---|
607 |
|
---|
608 | After command completion occurred, registers were:
|
---|
609 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
610 | -- -- -- == -- == == == -- -- -- -- --
|
---|
611 | 40 -- 41 00 78 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
612 |
|
---|
613 | Commands leading to the command that caused the error were:
|
---|
614 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
615 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
616 | 60 00 f8 00 80 00 00 0c 7f f6 86 40 00 00:47:28.819 READ FPDMA QUEUED
|
---|
617 | 60 00 08 00 78 00 00 0c 7f f6 06 40 00 00:47:28.819 READ FPDMA QUEUED
|
---|
618 | ef 00 10 00 03 00 00 00 00 00 00 a0 00 00:47:28.810 SET FEATURES [Enable SATA feature]
|
---|
619 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:47:28.798 SET FEATURES [Enable SATA feature]
|
---|
620 | ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:47:28.797 IDENTIFY DEVICE
|
---|
621 |
|
---|
622 | Error 1624 [87] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
623 | When the command that caused the error occurred, the device was active or idle.
|
---|
624 |
|
---|
625 | After command completion occurred, registers were:
|
---|
626 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
627 | -- -- -- == -- == == == -- -- -- -- --
|
---|
628 | 40 -- 41 00 a0 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
629 |
|
---|
630 | Commands leading to the command that caused the error were:
|
---|
631 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
632 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
633 | 60 00 f8 00 a8 00 00 0c 7f f6 86 40 00 00:47:28.290 READ FPDMA QUEUED
|
---|
634 | 60 00 08 00 a0 00 00 0c 7f f6 06 40 00 00:47:28.290 READ FPDMA QUEUED
|
---|
635 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:47:28.286 SET FEATURES [Enable SATA feature]
|
---|
636 | ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:47:28.285 IDENTIFY DEVICE
|
---|
637 | ef 00 03 00 45 00 00 00 00 00 00 a0 00 00:47:28.284 SET FEATURES [Set transfer mode]
|
---|
638 |
|
---|
639 | Error 1623 [86] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
640 | When the command that caused the error occurred, the device was active or idle.
|
---|
641 |
|
---|
642 | After command completion occurred, registers were:
|
---|
643 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
644 | -- -- -- == -- == == == -- -- -- -- --
|
---|
645 | 40 -- 41 00 c0 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
646 |
|
---|
647 | Commands leading to the command that caused the error were:
|
---|
648 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
649 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
650 | 60 00 f8 00 c8 00 00 0c 7f f6 86 40 00 00:47:28.159 READ FPDMA QUEUED
|
---|
651 | 60 00 78 00 c0 00 00 0c 7f f6 06 40 00 00:47:28.159 READ FPDMA QUEUED
|
---|
652 | 60 00 30 00 b8 00 00 0c 7f f5 c6 40 00 00:47:28.159 READ FPDMA QUEUED
|
---|
653 | 60 00 10 00 b0 00 00 0c 7f f5 a6 40 00 00:47:28.159 READ FPDMA QUEUED
|
---|
654 | 60 00 08 00 a8 00 00 0c 7f f5 8e 40 00 00:47:28.159 READ FPDMA QUEUED
|
---|
655 |
|
---|
656 | Error 1622 [85] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
657 | When the command that caused the error occurred, the device was active or idle.
|
---|
658 |
|
---|
659 | After command completion occurred, registers were:
|
---|
660 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
661 | -- -- -- == -- == == == -- -- -- -- --
|
---|
662 | 40 -- 41 00 00 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
663 |
|
---|
664 | Commands leading to the command that caused the error were:
|
---|
665 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
666 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
667 | 60 00 08 00 40 00 00 00 10 8e f8 40 00 00:47:25.546 READ FPDMA QUEUED
|
---|
668 | 60 00 08 00 38 00 00 00 13 a7 80 40 00 00:47:25.546 READ FPDMA QUEUED
|
---|
669 | 60 00 08 00 30 00 00 00 13 a8 00 40 00 00:47:25.546 READ FPDMA QUEUED
|
---|
670 | 60 00 08 00 28 00 00 10 40 08 00 40 00 00:47:25.546 READ FPDMA QUEUED
|
---|
671 | 60 00 08 00 20 00 00 00 14 28 40 40 00 00:47:25.546 READ FPDMA QUEUED
|
---|
672 |
|
---|
673 | Error 1621 [84] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
674 | When the command that caused the error occurred, the device was active or idle.
|
---|
675 |
|
---|
676 | After command completion occurred, registers were:
|
---|
677 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
678 | -- -- -- == -- == == == -- -- -- -- --
|
---|
679 | 40 -- 41 00 90 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
680 |
|
---|
681 | Commands leading to the command that caused the error were:
|
---|
682 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
683 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
684 | 60 00 08 00 d0 00 00 73 1b 3f 80 40 00 00:47:25.002 READ FPDMA QUEUED
|
---|
685 | 60 00 08 00 c8 00 00 74 70 67 80 40 00 00:47:25.002 READ FPDMA QUEUED
|
---|
686 | 60 02 00 00 c0 00 00 0c 7f f1 59 40 00 00:47:25.002 READ FPDMA QUEUED
|
---|
687 | 60 00 08 00 b8 00 00 00 14 28 40 40 00 00:47:25.002 READ FPDMA QUEUED
|
---|
688 | 60 00 08 00 b0 00 00 10 40 08 00 40 00 00:47:25.002 READ FPDMA QUEUED
|
---|
689 |
|
---|
690 | Error 1620 [83] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
691 | When the command that caused the error occurred, the device was active or idle.
|
---|
692 |
|
---|
693 | After command completion occurred, registers were:
|
---|
694 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
695 | -- -- -- == -- == == == -- -- -- -- --
|
---|
696 | 40 -- 41 00 30 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
697 |
|
---|
698 | Commands leading to the command that caused the error were:
|
---|
699 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
700 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
701 | 60 02 00 00 48 00 00 0c 7f f1 59 40 00 00:47:24.489 READ FPDMA QUEUED
|
---|
702 | 60 01 f8 00 40 00 00 07 80 21 61 40 00 00:47:24.488 READ FPDMA QUEUED
|
---|
703 | 60 00 f8 00 38 00 00 07 80 20 61 40 00 00:47:24.485 READ FPDMA QUEUED
|
---|
704 | 60 00 78 00 28 00 00 07 80 1f e1 40 00 00:47:24.485 READ FPDMA QUEUED
|
---|
705 | 60 00 30 00 20 00 00 07 80 1f a1 40 00 00:47:24.485 READ FPDMA QUEUED
|
---|
706 |
|
---|
707 | Error 1619 [82] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
708 | When the command that caused the error occurred, the device was active or idle.
|
---|
709 |
|
---|
710 | After command completion occurred, registers were:
|
---|
711 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
712 | -- -- -- == -- == == == -- -- -- -- --
|
---|
713 | 40 -- 41 00 f0 00 00 0c 7f f6 06 40 00 Error: WP at LBA = 0x0c7ff606 = 209712646
|
---|
714 |
|
---|
715 | Commands leading to the command that caused the error were:
|
---|
716 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
717 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
718 | 61 03 00 00 30 00 00 0c b5 78 fe 40 00 00:45:32.473 WRITE FPDMA QUEUED
|
---|
719 | 61 03 00 00 28 00 00 0c 95 78 fe 40 00 00:45:32.473 WRITE FPDMA QUEUED
|
---|
720 | 61 00 20 00 20 00 00 0d 21 42 d6 40 00 00:45:32.473 WRITE FPDMA QUEUED
|
---|
721 | 61 00 20 00 18 00 00 0c d1 2c 9e 40 00 00:45:32.473 WRITE FPDMA QUEUED
|
---|
722 | 60 00 08 00 10 00 00 00 10 8f f0 40 00 00:45:32.473 READ FPDMA QUEUED
|
---|
723 |
|
---|
724 | Error 1618 [81] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
725 | When the command that caused the error occurred, the device was active or idle.
|
---|
726 |
|
---|
727 | After command completion occurred, registers were:
|
---|
728 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
729 | -- -- -- == -- == == == -- -- -- -- --
|
---|
730 | 40 -- 41 00 80 00 00 0c 7f f6 06 40 00 Error: WP at LBA = 0x0c7ff606 = 209712646
|
---|
731 |
|
---|
732 | Commands leading to the command that caused the error were:
|
---|
733 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
734 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
735 | 61 00 38 00 08 00 00 0c ce b8 a6 40 00 00:45:31.579 WRITE FPDMA QUEUED
|
---|
736 | 61 00 18 00 00 00 00 0c c8 b6 46 40 00 00:45:31.579 WRITE FPDMA QUEUED
|
---|
737 | 61 00 10 00 f8 00 00 0c c7 a1 4e 40 00 00:45:31.579 WRITE FPDMA QUEUED
|
---|
738 | 61 00 60 00 f0 00 00 0c 95 78 9e 40 00 00:45:31.577 WRITE FPDMA QUEUED
|
---|
739 | 61 00 20 00 e8 00 00 07 c0 e6 39 40 00 00:45:31.577 WRITE FPDMA QUEUED
|
---|
740 |
|
---|
741 | Error 1617 [80] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
742 | When the command that caused the error occurred, the device was active or idle.
|
---|
743 |
|
---|
744 | After command completion occurred, registers were:
|
---|
745 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
746 | -- -- -- == -- == == == -- -- -- -- --
|
---|
747 | 40 -- 41 00 78 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
748 |
|
---|
749 | Commands leading to the command that caused the error were:
|
---|
750 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
751 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
752 | 60 00 10 00 28 00 00 0c 80 6b c6 40 00 00:37:34.117 READ FPDMA QUEUED
|
---|
753 | 60 00 08 00 78 00 00 0c 7f f6 06 40 00 00:37:34.081 READ FPDMA QUEUED
|
---|
754 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:37:34.080 SET FEATURES [Enable SATA feature]
|
---|
755 | ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:37:34.080 IDENTIFY DEVICE
|
---|
756 | ef 00 03 00 45 00 00 00 00 00 00 a0 00 00:37:34.079 SET FEATURES [Set transfer mode]
|
---|
757 |
|
---|
758 | Error 1616 [79] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
759 | When the command that caused the error occurred, the device was active or idle.
|
---|
760 |
|
---|
761 | After command completion occurred, registers were:
|
---|
762 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
763 | -- -- -- == -- == == == -- -- -- -- --
|
---|
764 | 40 -- 41 00 68 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
765 |
|
---|
766 | Commands leading to the command that caused the error were:
|
---|
767 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
768 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
769 | 60 00 08 00 68 00 00 0c 7f f6 06 40 00 00:37:33.938 READ FPDMA QUEUED
|
---|
770 | 60 05 e8 00 60 00 00 0d 5e b5 de 40 00 00:37:33.938 READ FPDMA QUEUED
|
---|
771 | ea 00 00 00 00 00 00 00 00 00 00 a0 00 00:37:33.692 FLUSH CACHE EXT
|
---|
772 | 60 00 28 00 28 00 00 07 c5 af 79 40 00 00:37:33.642 READ FPDMA QUEUED
|
---|
773 | 60 00 20 00 20 00 00 07 c5 af 59 40 00 00:37:33.632 READ FPDMA QUEUED
|
---|
774 |
|
---|
775 | Error 1615 [78] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
776 | When the command that caused the error occurred, the device was active or idle.
|
---|
777 |
|
---|
778 | After command completion occurred, registers were:
|
---|
779 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
780 | -- -- -- == -- == == == -- -- -- -- --
|
---|
781 | 40 -- 41 00 f0 00 00 0c cd 35 7e 40 00 Error: UNC at LBA = 0x0ccd357e = 214775166
|
---|
782 |
|
---|
783 | Commands leading to the command that caused the error were:
|
---|
784 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
785 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
786 | 60 00 08 00 f0 00 00 0c cd 35 7e 40 00 00:37:04.577 READ FPDMA QUEUED
|
---|
787 | 60 00 08 00 e8 00 00 0c c9 22 de 40 00 00:37:04.577 READ FPDMA QUEUED
|
---|
788 | 60 00 08 00 e0 00 00 0c c2 e8 3e 40 00 00:37:04.577 READ FPDMA QUEUED
|
---|
789 | 60 00 08 00 d8 00 00 0c c3 dd b6 40 00 00:37:04.577 READ FPDMA QUEUED
|
---|
790 | 60 00 08 00 d0 00 00 0c c8 e4 c6 40 00 00:37:04.577 READ FPDMA QUEUED
|
---|
791 |
|
---|
792 | Error 1614 [77] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
793 | When the command that caused the error occurred, the device was active or idle.
|
---|
794 |
|
---|
795 | After command completion occurred, registers were:
|
---|
796 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
797 | -- -- -- == -- == == == -- -- -- -- --
|
---|
798 | 40 -- 41 00 80 00 00 0c cd 35 7e 40 00 Error: UNC at LBA = 0x0ccd357e = 214775166
|
---|
799 |
|
---|
800 | Commands leading to the command that caused the error were:
|
---|
801 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
802 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
803 | 60 00 08 00 30 00 00 0c c1 1e a6 40 00 00:37:04.396 READ FPDMA QUEUED
|
---|
804 | 60 00 08 00 88 00 00 0c c1 25 76 40 00 00:37:04.394 READ FPDMA QUEUED
|
---|
805 | 60 00 08 00 f8 00 00 0c c1 30 fe 40 00 00:37:04.393 READ FPDMA QUEUED
|
---|
806 | 60 00 08 00 78 00 00 0c c1 30 66 40 00 00:37:04.393 READ FPDMA QUEUED
|
---|
807 | 60 01 f0 00 18 00 00 0c e3 d1 66 40 00 00:37:04.393 READ FPDMA QUEUED
|
---|
808 |
|
---|
809 | Error 1613 [76] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
810 | When the command that caused the error occurred, the device was active or idle.
|
---|
811 |
|
---|
812 | After command completion occurred, registers were:
|
---|
813 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
814 | -- -- -- == -- == == == -- -- -- -- --
|
---|
815 | 40 -- 41 00 c0 00 00 0c cd 35 7e 40 00 Error: UNC at LBA = 0x0ccd357e = 214775166
|
---|
816 |
|
---|
817 | Commands leading to the command that caused the error were:
|
---|
818 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
819 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
820 | 60 00 08 00 50 00 00 0c cc ad 9e 40 00 00:37:02.972 READ FPDMA QUEUED
|
---|
821 | 60 00 08 00 d8 00 00 0c cc a4 7e 40 00 00:37:02.965 READ FPDMA QUEUED
|
---|
822 | 60 00 10 00 b8 00 00 0c cc 59 8e 40 00 00:37:02.962 READ FPDMA QUEUED
|
---|
823 | 60 00 08 00 08 00 00 0c ca c2 86 40 00 00:37:02.959 READ FPDMA QUEUED
|
---|
824 | 60 00 08 00 e0 00 00 0c c9 86 26 40 00 00:37:02.955 READ FPDMA QUEUED
|
---|
825 |
|
---|
826 | Error 1612 [75] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
827 | When the command that caused the error occurred, the device was active or idle.
|
---|
828 |
|
---|
829 | After command completion occurred, registers were:
|
---|
830 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
831 | -- -- -- == -- == == == -- -- -- -- --
|
---|
832 | 40 -- 41 00 a0 00 00 0c cc 91 7e 40 00 Error: UNC at LBA = 0x0ccc917e = 214733182
|
---|
833 |
|
---|
834 | Commands leading to the command that caused the error were:
|
---|
835 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
836 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
837 | 60 00 08 00 a0 00 00 0c cc 91 7e 40 00 00:36:24.429 READ FPDMA QUEUED
|
---|
838 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:36:24.428 SET FEATURES [Enable SATA feature]
|
---|
839 | ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:36:24.428 IDENTIFY DEVICE
|
---|
840 | ef 00 03 00 45 00 00 00 00 00 00 a0 00 00:36:24.427 SET FEATURES [Set transfer mode]
|
---|
841 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:36:24.427 SET FEATURES [Enable SATA feature]
|
---|
842 |
|
---|
843 | Error 1611 [74] occurred at disk power-on lifetime: 17011 hours (708 days + 19 hours)
|
---|
844 | When the command that caused the error occurred, the device was active or idle.
|
---|
845 |
|
---|
846 | After command completion occurred, registers were:
|
---|
847 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
848 | -- -- -- == -- == == == -- -- -- -- --
|
---|
849 | 40 -- 41 00 10 00 00 0c cc 91 7e 40 00 Error: UNC at LBA = 0x0ccc917e = 214733182
|
---|
850 |
|
---|
851 | Commands leading to the command that caused the error were:
|
---|
852 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
853 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
854 | 60 00 10 00 18 00 00 0c da 44 0e 40 00 00:36:24.314 READ FPDMA QUEUED
|
---|
855 | 60 00 08 00 10 00 00 0c cc 91 7e 40 00 00:36:24.314 READ FPDMA QUEUED
|
---|
856 | 60 00 38 00 08 00 00 0c dc 12 c6 40 00 00:36:24.285 READ FPDMA QUEUED
|
---|
857 | 60 00 08 00 00 00 00 0c cc 6c 1e 40 00 00:36:24.285 READ FPDMA QUEUED
|
---|
858 | 60 00 10 00 f8 00 00 0c da 40 6e 40 00 00:36:24.244 READ FPDMA QUEUED
|
---|
859 |
|
---|
860 | Error 1610 [73] occurred at disk power-on lifetime: 17010 hours (708 days + 18 hours)
|
---|
861 | When the command that caused the error occurred, the device was active or idle.
|
---|
862 |
|
---|
863 | After command completion occurred, registers were:
|
---|
864 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
865 | -- -- -- == -- == == == -- -- -- -- --
|
---|
866 | 40 -- 41 00 20 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
867 |
|
---|
868 | Commands leading to the command that caused the error were:
|
---|
869 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
870 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
871 | 60 00 08 00 20 00 00 0c 7f f6 06 40 00 00:33:07.345 READ FPDMA QUEUED
|
---|
872 | 60 00 08 00 18 00 00 00 10 8f 80 40 00 00:33:07.345 READ FPDMA QUEUED
|
---|
873 | 60 00 10 00 10 00 00 0c e2 cf 9e 40 00 00:33:07.345 READ FPDMA QUEUED
|
---|
874 | 60 00 08 00 f0 00 00 07 80 0f f0 40 00 00:33:07.345 READ FPDMA QUEUED
|
---|
875 | 60 00 08 00 e8 00 00 00 14 27 f0 40 00 00:33:07.345 READ FPDMA QUEUED
|
---|
876 |
|
---|
877 | Error 1609 [72] occurred at disk power-on lifetime: 17010 hours (708 days + 18 hours)
|
---|
878 | When the command that caused the error occurred, the device was active or idle.
|
---|
879 |
|
---|
880 | After command completion occurred, registers were:
|
---|
881 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
882 | -- -- -- == -- == == == -- -- -- -- --
|
---|
883 | 40 -- 41 00 80 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
884 |
|
---|
885 | Commands leading to the command that caused the error were:
|
---|
886 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
887 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
888 | 60 00 10 00 90 00 00 0c e2 cf 9e 40 00 00:33:07.194 READ FPDMA QUEUED
|
---|
889 | 60 00 08 00 88 00 00 00 10 8f 80 40 00 00:33:07.194 READ FPDMA QUEUED
|
---|
890 | 60 00 08 00 80 00 00 0c 7f f6 06 40 00 00:33:07.194 READ FPDMA QUEUED
|
---|
891 | 60 00 08 00 78 00 00 07 80 0f 80 40 00 00:33:07.194 READ FPDMA QUEUED
|
---|
892 | 60 00 08 00 70 00 00 00 14 27 80 40 00 00:33:07.194 READ FPDMA QUEUED
|
---|
893 |
|
---|
894 | Error 1608 [71] occurred at disk power-on lifetime: 17010 hours (708 days + 18 hours)
|
---|
895 | When the command that caused the error occurred, the device was active or idle.
|
---|
896 |
|
---|
897 | After command completion occurred, registers were:
|
---|
898 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
899 | -- -- -- == -- == == == -- -- -- -- --
|
---|
900 | 40 -- 41 00 78 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
901 |
|
---|
902 | Commands leading to the command that caused the error were:
|
---|
903 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
904 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
905 | 60 00 08 00 78 00 00 0c 7f f6 06 40 00 00:33:04.980 READ FPDMA QUEUED
|
---|
906 | 60 00 08 00 70 00 00 07 80 0f 80 40 00 00:33:04.980 READ FPDMA QUEUED
|
---|
907 | 60 00 10 00 68 00 00 0c dc b0 a6 40 00 00:33:04.980 READ FPDMA QUEUED
|
---|
908 | 60 00 08 00 60 00 00 00 14 27 80 40 00 00:33:04.980 READ FPDMA QUEUED
|
---|
909 | 60 00 08 00 58 00 00 00 10 8f 80 40 00 00:33:04.980 READ FPDMA QUEUED
|
---|
910 |
|
---|
911 | Error 1607 [70] occurred at disk power-on lifetime: 17010 hours (708 days + 18 hours)
|
---|
912 | When the command that caused the error occurred, the device was active or idle.
|
---|
913 |
|
---|
914 | After command completion occurred, registers were:
|
---|
915 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
916 | -- -- -- == -- == == == -- -- -- -- --
|
---|
917 | 40 -- 41 00 b0 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
918 |
|
---|
919 | Commands leading to the command that caused the error were:
|
---|
920 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
921 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
922 | 60 00 08 00 d0 00 00 00 10 8f 80 40 00 00:33:04.848 READ FPDMA QUEUED
|
---|
923 | 60 00 08 00 c8 00 00 00 14 27 80 40 00 00:33:04.848 READ FPDMA QUEUED
|
---|
924 | 60 00 10 00 c0 00 00 0c dc b0 a6 40 00 00:33:04.848 READ FPDMA QUEUED
|
---|
925 | 60 00 08 00 b8 00 00 07 80 0f 80 40 00 00:33:04.848 READ FPDMA QUEUED
|
---|
926 | 60 00 08 00 b0 00 00 0c 7f f6 06 40 00 00:33:04.848 READ FPDMA QUEUED
|
---|
927 |
|
---|
928 | Error 1606 [69] occurred at disk power-on lifetime: 17010 hours (708 days + 18 hours)
|
---|
929 | When the command that caused the error occurred, the device was active or idle.
|
---|
930 |
|
---|
931 | After command completion occurred, registers were:
|
---|
932 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
933 | -- -- -- == -- == == == -- -- -- -- --
|
---|
934 | 40 -- 41 00 68 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
935 |
|
---|
936 | Commands leading to the command that caused the error were:
|
---|
937 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
938 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
939 | 60 00 10 00 90 00 00 0c c5 9a 8e 40 00 00:33:04.204 READ FPDMA QUEUED
|
---|
940 | 60 00 08 00 68 00 00 0c 7f f6 00 40 00 00:33:04.188 READ FPDMA QUEUED
|
---|
941 | 60 00 10 00 60 00 00 0c c2 91 16 40 00 00:33:04.188 READ FPDMA QUEUED
|
---|
942 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:33:04.187 SET FEATURES [Enable SATA feature]
|
---|
943 | ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:33:04.187 IDENTIFY DEVICE
|
---|
944 |
|
---|
945 | Error 1605 [68] occurred at disk power-on lifetime: 17010 hours (708 days + 18 hours)
|
---|
946 | When the command that caused the error occurred, the device was active or idle.
|
---|
947 |
|
---|
948 | After command completion occurred, registers were:
|
---|
949 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
950 | -- -- -- == -- == == == -- -- -- -- --
|
---|
951 | 40 -- 41 00 78 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
952 |
|
---|
953 | Commands leading to the command that caused the error were:
|
---|
954 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
955 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
956 | 60 00 10 00 90 00 00 0c c2 91 16 40 00 00:33:04.068 READ FPDMA QUEUED
|
---|
957 | 60 00 08 00 78 00 00 0c 7f f6 00 40 00 00:33:04.068 READ FPDMA QUEUED
|
---|
958 | ef 00 10 00 02 00 00 00 00 00 00 a0 00 00:33:04.068 SET FEATURES [Enable SATA feature]
|
---|
959 | ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:33:04.067 IDENTIFY DEVICE
|
---|
960 | ef 00 03 00 45 00 00 00 00 00 00 a0 00 00:33:04.067 SET FEATURES [Set transfer mode]
|
---|
961 |
|
---|
962 | Error 1604 [67] occurred at disk power-on lifetime: 17010 hours (708 days + 18 hours)
|
---|
963 | When the command that caused the error occurred, the device was active or idle.
|
---|
964 |
|
---|
965 | After command completion occurred, registers were:
|
---|
966 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
967 | -- -- -- == -- == == == -- -- -- -- --
|
---|
968 | 40 -- 41 00 20 00 00 0c 7f f6 06 40 00 Error: UNC at LBA = 0x0c7ff606 = 209712646
|
---|
969 |
|
---|
970 | Commands leading to the command that caused the error were:
|
---|
971 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
972 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
973 | 60 00 08 00 20 00 00 0c 7f f6 00 40 00 00:33:03.942 READ FPDMA QUEUED
|
---|
974 | 60 00 20 00 18 00 00 0c 7f f5 88 40 00 00:33:03.942 READ FPDMA QUEUED
|
---|
975 | 60 00 08 00 60 00 00 10 3f e7 f0 40 00 00:33:03.920 READ FPDMA QUEUED
|
---|
976 | 60 00 10 00 58 00 00 0c 7f f5 78 40 00 00:33:03.920 READ FPDMA QUEUED
|
---|
977 | 60 00 08 00 50 00 00 0c 7f f5 f8 40 00 00:33:03.909 READ FPDMA QUEUED
|
---|
978 |
|
---|
979 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
980 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
981 | # 1 Short offline Completed: read failure 90% 17023 209712646
|
---|
982 | # 2 Short offline Completed: read failure 90% 17008 209712646
|
---|
983 | # 3 Short offline Completed: read failure 90% 17008 209712646
|
---|
984 | # 4 Short offline Completed without error 00% 6747 -
|
---|
985 | # 5 Short offline Completed without error 00% 6747 -
|
---|
986 | # 6 Short offline Completed without error 00% 6747 -
|
---|
987 | # 7 Extended offline Aborted by host 90% 6747 -
|
---|
988 |
|
---|
989 | SMART Selective self-test log data structure revision number 1
|
---|
990 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
991 | 1 0 0 Not_testing
|
---|
992 | 2 0 0 Not_testing
|
---|
993 | 3 0 0 Not_testing
|
---|
994 | 4 0 0 Not_testing
|
---|
995 | 5 0 0 Not_testing
|
---|
996 | Selective self-test flags (0x0):
|
---|
997 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
998 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
999 |
|
---|
1000 | SCT Status Version: 2
|
---|
1001 | SCT Version (vendor specific): 1 (0x0001)
|
---|
1002 | Device State: Active (0)
|
---|
1003 | Current Temperature: 33 Celsius
|
---|
1004 | Power Cycle Min/Max Temperature: 28/42 Celsius
|
---|
1005 | Lifetime Min/Max Temperature: 16/48 Celsius
|
---|
1006 | Under/Over Temperature Limit Count: 0/0
|
---|
1007 |
|
---|
1008 | SCT Temperature History Version: 2
|
---|
1009 | Temperature Sampling Period: 1 minute
|
---|
1010 | Temperature Logging Interval: 1 minute
|
---|
1011 | Min/Max recommended Temperature: 0/60 Celsius
|
---|
1012 | Min/Max Temperature Limit: 0/60 Celsius
|
---|
1013 | Temperature History Size (Index): 478 (342)
|
---|
1014 |
|
---|
1015 | Index Estimated Time Temperature Celsius
|
---|
1016 | 343 2021-06-12 12:05 33 **************
|
---|
1017 | ... ..( 18 skipped). .. **************
|
---|
1018 | 362 2021-06-12 12:24 33 **************
|
---|
1019 | 363 2021-06-12 12:25 32 *************
|
---|
1020 | 364 2021-06-12 12:26 33 **************
|
---|
1021 | 365 2021-06-12 12:27 32 *************
|
---|
1022 | ... ..(192 skipped). .. *************
|
---|
1023 | 80 2021-06-12 15:40 32 *************
|
---|
1024 | 81 2021-06-12 15:41 31 ************
|
---|
1025 | ... ..( 16 skipped). .. ************
|
---|
1026 | 98 2021-06-12 15:58 31 ************
|
---|
1027 | 99 2021-06-12 15:59 32 *************
|
---|
1028 | 100 2021-06-12 16:00 31 ************
|
---|
1029 | 101 2021-06-12 16:01 31 ************
|
---|
1030 | 102 2021-06-12 16:02 32 *************
|
---|
1031 | ... ..(185 skipped). .. *************
|
---|
1032 | 288 2021-06-12 19:08 32 *************
|
---|
1033 | 289 2021-06-12 19:09 31 ************
|
---|
1034 | ... ..( 10 skipped). .. ************
|
---|
1035 | 300 2021-06-12 19:20 31 ************
|
---|
1036 | 301 2021-06-12 19:21 30 ***********
|
---|
1037 | ... ..( 19 skipped). .. ***********
|
---|
1038 | 321 2021-06-12 19:41 30 ***********
|
---|
1039 | 322 2021-06-12 19:42 31 ************
|
---|
1040 | 323 2021-06-12 19:43 31 ************
|
---|
1041 | 324 2021-06-12 19:44 32 *************
|
---|
1042 | 325 2021-06-12 19:45 32 *************
|
---|
1043 | 326 2021-06-12 19:46 32 *************
|
---|
1044 | 327 2021-06-12 19:47 33 **************
|
---|
1045 | ... ..( 5 skipped). .. **************
|
---|
1046 | 333 2021-06-12 19:53 33 **************
|
---|
1047 | 334 2021-06-12 19:54 34 ***************
|
---|
1048 | 335 2021-06-12 19:55 33 **************
|
---|
1049 | ... ..( 6 skipped). .. **************
|
---|
1050 | 342 2021-06-12 20:02 33 **************
|
---|
1051 |
|
---|
1052 | SCT Error Recovery Control:
|
---|
1053 | Read: Disabled
|
---|
1054 | Write: Disabled
|
---|
1055 |
|
---|
1056 | Device Statistics (GP Log 0x04)
|
---|
1057 | Page Offset Size Value Flags Description
|
---|
1058 | 0x01 ===== = = === == General Statistics (rev 2) ==
|
---|
1059 | 0x01 0x008 4 2919 --- Lifetime Power-On Resets
|
---|
1060 | 0x01 0x010 4 17023 --- Power-on Hours
|
---|
1061 | 0x01 0x018 6 64688184418 --- Logical Sectors Written
|
---|
1062 | 0x01 0x020 6 877790061 --- Number of Write Commands
|
---|
1063 | 0x01 0x028 6 49219484792 --- Logical Sectors Read
|
---|
1064 | 0x01 0x030 6 747159428 --- Number of Read Commands
|
---|
1065 | 0x02 ===== = = === == Free-Fall Statistics (rev 1) ==
|
---|
1066 | 0x02 0x010 4 213 --- Overlimit Shock Events
|
---|
1067 | 0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
|
---|
1068 | 0x03 0x008 4 16737 --- Spindle Motor Power-on Hours
|
---|
1069 | 0x03 0x010 4 16778 --- Head Flying Hours
|
---|
1070 | 0x03 0x018 4 5737 --- Head Load Events
|
---|
1071 | 0x03 0x020 4 320 --- Number of Reallocated Logical Sectors
|
---|
1072 | 0x03 0x028 4 40 --- Read Recovery Attempts
|
---|
1073 | 0x03 0x030 4 0 --- Number of Mechanical Start Failures
|
---|
1074 | 0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
---|
1075 | 0x04 0x008 4 1653 --- Number of Reported Uncorrectable Errors
|
---|
1076 | 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
|
---|
1077 | 0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
---|
1078 | 0x05 0x008 1 33 --- Current Temperature
|
---|
1079 | 0x05 0x010 1 35 N-- Average Short Term Temperature
|
---|
1080 | 0x05 0x018 1 36 N-- Average Long Term Temperature
|
---|
1081 | 0x05 0x020 1 48 --- Highest Temperature
|
---|
1082 | 0x05 0x028 1 16 --- Lowest Temperature
|
---|
1083 | 0x05 0x030 1 41 N-- Highest Average Short Term Temperature
|
---|
1084 | 0x05 0x038 1 30 N-- Lowest Average Short Term Temperature
|
---|
1085 | 0x05 0x040 1 38 N-- Highest Average Long Term Temperature
|
---|
1086 | 0x05 0x048 1 32 N-- Lowest Average Long Term Temperature
|
---|
1087 | 0x05 0x050 4 0 --- Time in Over-Temperature
|
---|
1088 | 0x05 0x058 1 60 --- Specified Maximum Operating Temperature
|
---|
1089 | 0x05 0x060 4 0 --- Time in Under-Temperature
|
---|
1090 | 0x05 0x068 1 0 --- Specified Minimum Operating Temperature
|
---|
1091 | 0x06 ===== = = === == Transport Statistics (rev 1) ==
|
---|
1092 | 0x06 0x008 4 9436 --- Number of Hardware Resets
|
---|
1093 | 0x06 0x018 4 0 --- Number of Interface CRC Errors
|
---|
1094 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
---|
1095 | 0x07 0x008 1 28 N-- Percentage Used Endurance Indicator
|
---|
1096 | |||_ C monitored condition met
|
---|
1097 | ||__ D supports DSN
|
---|
1098 | |___ N normalized value
|
---|
1099 |
|
---|
1100 | SATA Phy Event Counters (GP Log 0x11)
|
---|
1101 | ID Size Value Description
|
---|
1102 | 0x0001 4 0 Command failed due to ICRC error
|
---|
1103 | 0x0002 4 0 R_ERR response for data FIS
|
---|
1104 | 0x0003 4 0 R_ERR response for device-to-host data FIS
|
---|
1105 | 0x0004 4 0 R_ERR response for host-to-device data FIS
|
---|
1106 | 0x0005 4 0 R_ERR response for non-data FIS
|
---|
1107 | 0x0006 4 0 R_ERR response for device-to-host non-data FIS
|
---|
1108 | 0x0007 4 0 R_ERR response for host-to-device non-data FIS
|
---|
1109 | 0x0008 4 0 Device-to-host non-data FIS retries
|
---|
1110 | 0x0009 4 55642 Transition from drive PhyRdy to drive PhyNRdy
|
---|
1111 | 0x000a 4 62 Device-to-host register FISes sent due to a COMRESET
|
---|
1112 | 0x000b 4 0 CRC errors within host-to-device FIS
|
---|
1113 | 0x000d 4 0 Non-CRC errors within host-to-device FIS
|
---|
1114 | 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
|
---|
1115 | 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
|
---|
1116 | 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
|
---|
1117 | 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
---|