1 | smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.51-ck1] (local build)
|
---|
2 | Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
|
---|
3 |
|
---|
4 | === START OF INFORMATION SECTION ===
|
---|
5 | Device Model: Corsair Force LE SSD
|
---|
6 | Firmware Version: SAFC11.0
|
---|
7 | User Capacity: 240.057.409.536 bytes [240 GB]
|
---|
8 | Sector Size: 512 bytes logical/physical
|
---|
9 | Rotation Rate: Solid State Device
|
---|
10 | Form Factor: 2.5 inches
|
---|
11 | Device is: Not in smartctl database [for details use: -P showall]
|
---|
12 | ATA Version is: ACS-2 (minor revision not indicated)
|
---|
13 | SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
|
---|
14 | Local Time is: Wed Jul 15 12:27:57 2020 -03
|
---|
15 | SMART support is: Available - device has SMART capability.
|
---|
16 | SMART support is: Enabled
|
---|
17 | AAM feature is: Unavailable
|
---|
18 | APM level is: 254 (maximum performance)
|
---|
19 | Rd look-ahead is: Enabled
|
---|
20 | Write cache is: Enabled
|
---|
21 | DSN feature is: Unavailable
|
---|
22 | ATA Security is: Disabled, NOT FROZEN [SEC1]
|
---|
23 | Wt Cache Reorder: Unavailable
|
---|
24 |
|
---|
25 | === START OF READ SMART DATA SECTION ===
|
---|
26 | SMART overall-health self-assessment test result: PASSED
|
---|
27 |
|
---|
28 | General SMART Values:
|
---|
29 | Offline data collection status: (0x00) Offline data collection activity
|
---|
30 | was never started.
|
---|
31 | Auto Offline Data Collection: Disabled.
|
---|
32 | Self-test execution status: ( 0) The previous self-test routine completed
|
---|
33 | without error or no self-test has ever
|
---|
34 | been run.
|
---|
35 | Total time to complete Offline
|
---|
36 | data collection: ( 30) seconds.
|
---|
37 | Offline data collection
|
---|
38 | capabilities: (0x79) SMART execute Offline immediate.
|
---|
39 | No Auto Offline data collection support.
|
---|
40 | Suspend Offline collection upon new
|
---|
41 | command.
|
---|
42 | Offline surface scan supported.
|
---|
43 | Self-test supported.
|
---|
44 | Conveyance Self-test supported.
|
---|
45 | Selective Self-test supported.
|
---|
46 | SMART capabilities: (0x0003) Saves SMART data before entering
|
---|
47 | power-saving mode.
|
---|
48 | Supports SMART auto save timer.
|
---|
49 | Error logging capability: (0x01) Error logging supported.
|
---|
50 | General Purpose Logging supported.
|
---|
51 | Short self-test routine
|
---|
52 | recommended polling time: ( 1) minutes.
|
---|
53 | Extended self-test routine
|
---|
54 | recommended polling time: ( 2) minutes.
|
---|
55 | Conveyance self-test routine
|
---|
56 | recommended polling time: ( 3) minutes.
|
---|
57 |
|
---|
58 | SMART Attributes Data Structure revision number: 16
|
---|
59 | Vendor Specific SMART Attributes with Thresholds:
|
---|
60 | ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
|
---|
61 | 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 203
|
---|
62 | 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0
|
---|
63 | 9 Power_On_Hours -O--C- 100 100 000 - 12792
|
---|
64 | 12 Power_Cycle_Count -O--C- 100 100 000 - 4648
|
---|
65 | 162 Unknown_Attribute PO---- 100 100 000 - 290
|
---|
66 | 170 Unknown_Attribute -O---- 100 100 000 - 0
|
---|
67 | 173 Unknown_Attribute -O--C- 100 100 000 - 1310812
|
---|
68 | 174 Unknown_Attribute -O--C- 100 100 000 - 76
|
---|
69 | 181 Program_Fail_Cnt_Total -O--C- 100 100 000 - 0
|
---|
70 | 187 Reported_Uncorrect -O--C- 100 100 000 - 203
|
---|
71 | 192 Power-Off_Retract_Count -O--C- 100 100 000 - 76
|
---|
72 | 194 Temperature_Celsius PO---K 070 070 030 - 30 (Min/Max 30/30)
|
---|
73 | 196 Reallocated_Event_Count -O---- 100 100 010 - 0
|
---|
74 | 218 Unknown_Attribute PO-R-- 100 100 050 - 0
|
---|
75 | 231 Temperature_Celsius PO--C- 100 100 000 - 100
|
---|
76 | 241 Total_LBAs_Written -O--C- 100 100 000 - 6517
|
---|
77 | 242 Total_LBAs_Read -O--C- 100 100 000 - 26915
|
---|
78 | ||||||_ K auto-keep
|
---|
79 | |||||__ C event count
|
---|
80 | ||||___ R error rate
|
---|
81 | |||____ S speed/performance
|
---|
82 | ||_____ O updated online
|
---|
83 | |______ P prefailure warning
|
---|
84 |
|
---|
85 | General Purpose Log Directory Version 1
|
---|
86 | SMART Log Directory Version 1 [multi-sector log support]
|
---|
87 | Address Access R/W Size Description
|
---|
88 | 0x00 GPL,SL R/O 1 Log Directory
|
---|
89 | 0x01 SL R/O 1 Summary SMART error log
|
---|
90 | 0x02 SL R/O 51 Comprehensive SMART error log
|
---|
91 | 0x03 GPL R/O 64 Ext. Comprehensive SMART error log
|
---|
92 | 0x04 GPL,SL R/O 6 Device Statistics log
|
---|
93 | 0x06 SL R/O 1 SMART self-test log
|
---|
94 | 0x07 GPL R/O 1 Extended self-test log
|
---|
95 | 0x09 SL R/W 1 Selective self-test log
|
---|
96 | 0x10 GPL R/O 1 NCQ Command Error log
|
---|
97 | 0x11 GPL R/O 1 SATA Phy Event Counters log
|
---|
98 | 0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log
|
---|
99 | 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
|
---|
100 | 0xe0 GPL,SL R/W 1 SCT Command/Status
|
---|
101 | 0xe1 GPL,SL R/W 1 SCT Data Transfer
|
---|
102 |
|
---|
103 | SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
|
---|
104 | Device Error Count: 203
|
---|
105 | CR = Command Register
|
---|
106 | FEATR = Features Register
|
---|
107 | COUNT = Count (was: Sector Count) Register
|
---|
108 | LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
|
---|
109 | LH = LBA High (was: Cylinder High) Register ] LBA
|
---|
110 | LM = LBA Mid (was: Cylinder Low) Register ] Register
|
---|
111 | LL = LBA Low (was: Sector Number) Register ]
|
---|
112 | DV = Device (was: Device/Head) Register
|
---|
113 | DC = Device Control Register
|
---|
114 | ER = Error register
|
---|
115 | ST = Status register
|
---|
116 | Powered_Up_Time is measured from power on, and printed as
|
---|
117 | DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
|
---|
118 | SS=sec, and sss=millisec. It "wraps" after 49.710 days.
|
---|
119 |
|
---|
120 | Error 203 [202] occurred at disk power-on lifetime: 12627 hours (526 days + 3 hours)
|
---|
121 | When the command that caused the error occurred, the device was active or idle.
|
---|
122 |
|
---|
123 | After command completion occurred, registers were:
|
---|
124 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
125 | -- -- -- == -- == == == -- -- -- -- --
|
---|
126 | 40 -- 41 00 a8 00 00 0e d1 3b f9 40 00 Error: UNC at LBA = 0x0ed13bf9 = 248593401
|
---|
127 |
|
---|
128 | Commands leading to the command that caused the error were:
|
---|
129 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
130 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
131 | 60 00 10 00 a8 00 00 0e d1 3b f9 40 08 00:00:07.703 READ FPDMA QUEUED
|
---|
132 | 60 00 a8 00 a0 00 00 03 08 1d 07 40 08 00:00:05.957 READ FPDMA QUEUED
|
---|
133 | 60 00 79 00 98 00 00 03 08 1b f6 40 08 00:00:05.956 READ FPDMA QUEUED
|
---|
134 | 60 00 98 00 90 00 00 03 08 1c 6f 40 08 00:00:05.955 READ FPDMA QUEUED
|
---|
135 | 60 00 b1 00 88 00 00 03 08 1e 51 40 08 00:00:05.955 READ FPDMA QUEUED
|
---|
136 |
|
---|
137 | Error 202 [201] occurred at disk power-on lifetime: 12614 hours (525 days + 14 hours)
|
---|
138 | When the command that caused the error occurred, the device was active or idle.
|
---|
139 |
|
---|
140 | After command completion occurred, registers were:
|
---|
141 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
142 | -- -- -- == -- == == == -- -- -- -- --
|
---|
143 | 40 -- 41 00 48 00 00 03 ca 2d dc 40 00 Error: UNC at LBA = 0x03ca2ddc = 63581660
|
---|
144 |
|
---|
145 | Commands leading to the command that caused the error were:
|
---|
146 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
147 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
148 | 60 00 04 00 48 00 00 03 ca 2d dc 40 08 00:01:54.395 READ FPDMA QUEUED
|
---|
149 | 60 00 3a 00 40 00 00 03 c9 d7 dd 40 08 00:01:53.443 READ FPDMA QUEUED
|
---|
150 | 60 00 1d 00 38 00 00 03 c9 d7 c0 40 08 00:01:53.442 READ FPDMA QUEUED
|
---|
151 | 60 00 1d 00 30 00 00 03 c9 d7 a3 40 08 00:01:53.442 READ FPDMA QUEUED
|
---|
152 | 60 00 1d 00 28 00 00 03 c9 d7 86 40 08 00:01:53.442 READ FPDMA QUEUED
|
---|
153 |
|
---|
154 | Error 201 [200] occurred at disk power-on lifetime: 12581 hours (524 days + 5 hours)
|
---|
155 | When the command that caused the error occurred, the device was active or idle.
|
---|
156 |
|
---|
157 | After command completion occurred, registers were:
|
---|
158 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
159 | -- -- -- == -- == == == -- -- -- -- --
|
---|
160 | 40 -- 41 00 40 00 00 02 12 d5 fb 40 00 Error: UNC at LBA = 0x0212d5fb = 34788859
|
---|
161 |
|
---|
162 | Commands leading to the command that caused the error were:
|
---|
163 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
164 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
165 | 60 00 08 00 40 00 00 02 12 d5 fb 40 08 01:00:50.702 READ FPDMA QUEUED
|
---|
166 | 60 00 08 00 38 00 00 02 12 d6 03 40 08 01:00:50.702 READ FPDMA QUEUED
|
---|
167 | 60 00 09 00 30 00 00 02 18 2b 7b 40 08 01:00:50.693 READ FPDMA QUEUED
|
---|
168 | ea 00 00 00 00 00 00 00 00 00 00 a0 08 01:00:47.914 FLUSH CACHE EXT
|
---|
169 | 61 00 08 00 20 00 00 02 1d 94 fc 40 08 01:00:47.914 WRITE FPDMA QUEUED
|
---|
170 |
|
---|
171 | Error 200 [199] occurred at disk power-on lifetime: 12221 hours (509 days + 5 hours)
|
---|
172 | When the command that caused the error occurred, the device was active or idle.
|
---|
173 |
|
---|
174 | After command completion occurred, registers were:
|
---|
175 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
176 | -- -- -- == -- == == == -- -- -- -- --
|
---|
177 | 40 -- 41 00 e0 00 00 15 f3 44 76 40 00 Error: UNC at LBA = 0x15f34476 = 368264310
|
---|
178 |
|
---|
179 | Commands leading to the command that caused the error were:
|
---|
180 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
181 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
182 | 60 00 0c 00 e0 00 00 15 f3 44 76 40 08 04:04:14.402 READ FPDMA QUEUED
|
---|
183 | ea 00 00 00 00 00 00 00 00 00 00 a0 08 04:04:13.490 FLUSH CACHE EXT
|
---|
184 | 61 00 02 00 d0 00 00 1b f2 43 92 40 08 04:04:13.490 WRITE FPDMA QUEUED
|
---|
185 | 61 00 02 00 c8 00 00 1b f2 41 92 40 08 04:04:13.490 WRITE FPDMA QUEUED
|
---|
186 | 61 00 02 00 c0 00 00 00 10 0b 92 40 08 04:04:13.490 WRITE FPDMA QUEUED
|
---|
187 |
|
---|
188 | Error 199 [198] occurred at disk power-on lifetime: 12179 hours (507 days + 11 hours)
|
---|
189 | When the command that caused the error occurred, the device was active or idle.
|
---|
190 |
|
---|
191 | After command completion occurred, registers were:
|
---|
192 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
193 | -- -- -- == -- == == == -- -- -- -- --
|
---|
194 | 40 -- 41 00 10 00 00 11 ea fb 51 40 00 Error: UNC at LBA = 0x11eafb51 = 300612433
|
---|
195 |
|
---|
196 | Commands leading to the command that caused the error were:
|
---|
197 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
198 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
199 | 60 00 02 00 10 00 00 11 ea fb 51 40 08 06:21:46.842 READ FPDMA QUEUED
|
---|
200 | ea 00 00 00 00 00 00 00 00 00 00 a0 08 06:21:45.686 FLUSH CACHE EXT
|
---|
201 | 61 00 02 00 00 00 00 1b f2 43 e4 40 08 06:21:45.686 WRITE FPDMA QUEUED
|
---|
202 | 61 00 02 00 f0 00 00 1b f2 41 e4 40 08 06:21:45.686 WRITE FPDMA QUEUED
|
---|
203 | 61 00 02 00 e8 00 00 00 10 0b e4 40 08 06:21:45.686 WRITE FPDMA QUEUED
|
---|
204 |
|
---|
205 | Error 198 [197] occurred at disk power-on lifetime: 12124 hours (505 days + 4 hours)
|
---|
206 | When the command that caused the error occurred, the device was active or idle.
|
---|
207 |
|
---|
208 | After command completion occurred, registers were:
|
---|
209 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
210 | -- -- -- == -- == == == -- -- -- -- --
|
---|
211 | 40 -- 41 00 38 00 00 0f 72 2d 9a 40 00 Error: UNC at LBA = 0x0f722d9a = 259141018
|
---|
212 |
|
---|
213 | Commands leading to the command that caused the error were:
|
---|
214 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
215 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
216 | 60 00 0f 00 38 00 00 0f 72 2d 9a 40 08 00:19:23.930 READ FPDMA QUEUED
|
---|
217 | ea 00 00 00 00 00 00 00 00 00 00 a0 08 00:19:22.621 FLUSH CACHE EXT
|
---|
218 | 61 00 08 00 28 00 00 0f 55 5d e5 40 08 00:19:22.621 WRITE FPDMA QUEUED
|
---|
219 | ea 00 00 00 00 00 00 00 00 00 00 a0 08 00:19:22.619 FLUSH CACHE EXT
|
---|
220 | 61 00 30 00 18 00 00 0f 55 5d 9d 40 08 00:19:22.619 WRITE FPDMA QUEUED
|
---|
221 |
|
---|
222 | Error 197 [196] occurred at disk power-on lifetime: 12072 hours (503 days + 0 hours)
|
---|
223 | When the command that caused the error occurred, the device was active or idle.
|
---|
224 |
|
---|
225 | After command completion occurred, registers were:
|
---|
226 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
227 | -- -- -- == -- == == == -- -- -- -- --
|
---|
228 | 40 -- 41 00 b8 00 00 0c 6d 4e 9b 40 00 Error: UNC at LBA = 0x0c6d4e9b = 208490139
|
---|
229 |
|
---|
230 | Commands leading to the command that caused the error were:
|
---|
231 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
232 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
233 | 60 00 0f 00 b8 00 00 0c 6d 4e 9b 40 08 01:43:01.987 READ FPDMA QUEUED
|
---|
234 | 60 00 99 00 b0 00 00 07 28 a6 3e 40 08 01:42:58.574 READ FPDMA QUEUED
|
---|
235 | ea 00 00 00 00 00 00 00 00 00 00 a0 08 01:42:57.662 FLUSH CACHE EXT
|
---|
236 | 61 00 02 00 a0 00 00 1b f2 43 3c 40 08 01:42:57.662 WRITE FPDMA QUEUED
|
---|
237 | 61 00 02 00 98 00 00 1b f2 41 3c 40 08 01:42:57.662 WRITE FPDMA QUEUED
|
---|
238 |
|
---|
239 | Error 196 [195] occurred at disk power-on lifetime: 12061 hours (502 days + 13 hours)
|
---|
240 | When the command that caused the error occurred, the device was active or idle.
|
---|
241 |
|
---|
242 | After command completion occurred, registers were:
|
---|
243 | ER -- ST COUNT LBA_48 LH LM LL DV DC
|
---|
244 | -- -- -- == -- == == == -- -- -- -- --
|
---|
245 | 40 -- 41 00 78 00 00 0b 7e a0 0c 40 00 Error: UNC at LBA = 0x0b7ea00c = 192847884
|
---|
246 |
|
---|
247 | Commands leading to the command that caused the error were:
|
---|
248 | CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
|
---|
249 | -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
|
---|
250 | 60 00 02 00 78 00 00 0b 7e a0 0c 40 08 00:17:48.148 READ FPDMA QUEUED
|
---|
251 | 60 00 c1 00 70 00 00 03 14 96 42 40 08 00:17:47.231 READ FPDMA QUEUED
|
---|
252 | 60 00 02 00 68 00 00 03 14 97 0b 40 08 00:17:47.231 READ FPDMA QUEUED
|
---|
253 | 60 00 02 00 60 00 00 03 14 80 35 40 08 00:17:47.228 READ FPDMA QUEUED
|
---|
254 | 60 00 a3 00 58 00 00 07 56 78 02 40 08 00:17:47.223 READ FPDMA QUEUED
|
---|
255 |
|
---|
256 | SMART Extended Self-test Log Version: 1 (1 sectors)
|
---|
257 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
|
---|
258 | # 1 Short offline Completed without error 00% 12792 -
|
---|
259 | # 2 Short offline Completed without error 00% 7990 -
|
---|
260 |
|
---|
261 | SMART Selective self-test log data structure revision number 1
|
---|
262 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
|
---|
263 | 1 0 0 Not_testing
|
---|
264 | 2 0 0 Not_testing
|
---|
265 | 3 0 0 Not_testing
|
---|
266 | 4 0 0 Not_testing
|
---|
267 | 5 0 0 Not_testing
|
---|
268 | Selective self-test flags (0x0):
|
---|
269 | After scanning selected spans, do NOT read-scan remainder of disk.
|
---|
270 | If Selective self-test is pending on power-up, resume after 0 minute delay.
|
---|
271 |
|
---|
272 | SCT Commands not supported
|
---|
273 |
|
---|
274 | Device Statistics (GP Log 0x04)
|
---|
275 | Page Offset Size Value Flags Description
|
---|
276 | 0x01 ===== = = === == General Statistics (rev 2) ==
|
---|
277 | 0x01 0x008 4 4648 --- Lifetime Power-On Resets
|
---|
278 | 0x01 0x010 4 12792 --- Power-on Hours
|
---|
279 | 0x01 0x018 6 13669114069 --- Logical Sectors Written
|
---|
280 | 0x01 0x020 6 253277446 --- Number of Write Commands
|
---|
281 | 0x01 0x028 6 56445533223 --- Logical Sectors Read
|
---|
282 | 0x01 0x030 6 938738618 --- Number of Read Commands
|
---|
283 | 0x01 0x038 6 46052054171 --- Date and Time TimeStamp
|
---|
284 | 0x04 ===== = = === == General Errors Statistics (rev 1) ==
|
---|
285 | 0x04 0x008 4 118198 --- Number of Reported Uncorrectable Errors
|
---|
286 | 0x04 0x010 4 22 --- Resets Between Cmd Acceptance and Completion
|
---|
287 | 0x05 ===== = = === == Temperature Statistics (rev 1) ==
|
---|
288 | 0x05 0x008 1 32 --- Current Temperature
|
---|
289 | 0x05 0x010 1 32 --- Average Short Term Temperature
|
---|
290 | 0x05 0x018 1 32 --- Average Long Term Temperature
|
---|
291 | 0x05 0x020 1 50 --- Highest Temperature
|
---|
292 | 0x05 0x028 1 5 --- Lowest Temperature
|
---|
293 | 0x05 0x030 1 50 --- Highest Average Short Term Temperature
|
---|
294 | 0x05 0x038 1 16 --- Lowest Average Short Term Temperature
|
---|
295 | 0x05 0x040 1 50 --- Highest Average Long Term Temperature
|
---|
296 | 0x05 0x048 1 16 --- Lowest Average Long Term Temperature
|
---|
297 | 0x05 0x050 4 0 --- Time in Over-Temperature
|
---|
298 | 0x05 0x058 1 50 --- Specified Maximum Operating Temperature
|
---|
299 | 0x05 0x060 4 0 --- Time in Under-Temperature
|
---|
300 | 0x05 0x068 1 5 --- Specified Minimum Operating Temperature
|
---|
301 | 0x06 ===== = = === == Transport Statistics (rev 1) ==
|
---|
302 | 0x06 0x008 4 11686 --- Number of Hardware Resets
|
---|
303 | 0x06 0x018 4 0 --- Number of Interface CRC Errors
|
---|
304 | 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
|
---|
305 | 0x07 0x008 1 3 --- Percentage Used Endurance Indicator
|
---|
306 | |||_ C monitored condition met
|
---|
307 | ||__ D supports DSN
|
---|
308 | |___ N normalized value
|
---|
309 |
|
---|
310 | Pending Defects log (GP Log 0x0c) not supported
|
---|
311 |
|
---|
312 | SATA Phy Event Counters (GP Log 0x11)
|
---|
313 | ID Size Value Description
|
---|
314 | 0x0001 2 0 Command failed due to ICRC error
|
---|
315 | 0x0003 2 0 R_ERR response for device-to-host data FIS
|
---|
316 | 0x0004 2 0 R_ERR response for host-to-device data FIS
|
---|
317 | 0x0006 2 0 R_ERR response for device-to-host non-data FIS
|
---|
318 | 0x0007 2 0 R_ERR response for host-to-device non-data FIS
|
---|
319 | 0x0008 2 0 Device-to-host non-data FIS retries
|
---|
320 | 0x0009 4 48136592 Transition from drive PhyRdy to drive PhyNRdy
|
---|
321 | 0x000a 4 16010 Device-to-host register FISes sent due to a COMRESET
|
---|
322 | 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
|
---|
323 | 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
|
---|
324 | 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
|
---|
325 | 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
|
---|
326 |
|
---|