| Version 99 (modified by , 14 years ago) ( diff ) |
|---|
News
- 2012-11-07: Samuele Parise released
version 0.4.2 of HDD Guardian
(a graphical user interface for smartctl). Available only for Windows.
- 2012-10-27: Ozy de Jong released an alternative installer for smartmontools on Windows. It provides user friendly support for smartd configuration and unattended setup.
- 2012-10-10: Ten years after the first version of Smartmontools,
we released version 6.0 of Smartmontools.
See the NEWS file
and the ticket report to
get a summary of the changes and new features.
- 2012-08-12: Alexander Shaduri released
version 0.8.7 of GSmartControl
(a graphical user interface for smartctl). Available for Linux, FreeBSD, MacOS X and Windows.
- 2012-06-30: We released
version 5.43 of Smartmontools.
- 2012-05-30: We added experimental support for SATA drives behind an Areca SATA/SAS controller on Windows.
Thanks to Areca for providing this patch. Please report your test results to the
smartmontools support mailinglist.
- 2012-05-22: The OS-X-SAT-SMART-Driver
provides access to SMART data for SAT capable USB and Firewire devices on Mac OS X.
This works with existing smartmontools releases.
See ticket #25 for further details.
- 2011-10-20: We released
version 5.42 of Smartmontools.
- 2011-04-19: Help wanted! We are looking for a
maintainer / developer of smartmontools OpenBSD port
- 2011-02-04: We added experimental support for disks behind Intel Matrix RAID driver on Windows.
Please report your test results to the
smartmontools
support mailinglist.
- 2010-12-09: Samsung released an
important
firmware patch for HD155UI and HD204UI.
WARNING: Do not use smartmontools or hdparm with these drives unless this patch is already installed.
Drives manufactured December 2010 or later are not affected. See
this page
for details.
Table of Contents
About Smartmontools
The smartmontools package contains two utility programs (smartctl and smartd)
to control and monitor storage systems using the Self-Monitoring, Analysis and
Reporting Technology System (SMART) built into most modern ATA and SCSI harddisks.
In many cases, these utilities will provide advanced warning of disk degradation and failure.
Smartmontools was originally derived from the Linux smartsuite package and actually supports ATA/ATAPI/SATA-3 to -8 disks and SCSI disks and tape devices. It should run on any modern Darwin (Mac OS X), Linux, FreeBSD, NetBSD, OpenBSD, Solaris, OS/2, Cygwin, QNX, eComStation or Windows system. Smartmontools can also be run from one of many different Live CDs/DVDs.
Due to OS-specific issues and also depending on the different state of smartmontools development on the platforms, device support is not the same for all OS platforms. We provide info about RAID-controller support here on the homepage and of course in the manpages.
Thanks to Alexander Shaduri, there is also a graphical user interface for smartctl
available. Go to the Homepage of GSmartControl
to get all info and the software itself. Have a look at the
screenshots
and the feature list
to get an impression of this nice tool.
Contribute to Smartmontools
Device Information
If your drive is not in the current version of smarmtontools drive database you can help to improve smartmontools information by sending a report about your drive to our mailinglist smartmontools-database.
We collect info about USB devices that have been successfully or unsuccessfully tested with smartmontools. If you have a device not listed there, please tell us the test result, by editing the wiki page, and/or by sending an email to the smartmontools-database mailinglist.
Bug Reports
To submit a bug report or propose an enhancement for smartmontools create a new ticket here in trac. You have to be logged in with your sourceforge account to do so. If you don't have a scoureforge account and don't want to have one, you can also send the info to our smartmontools-support mailing list.
Patches
Patches are welcome! The most convenient way for us is, when you attach them to a new ticket here in trac. But it's also possible to submit patches for code review to developers mailinglist. Your patches should refer to our recent code base in SVN. You should also have a look at the documents in the developers area here in the wiki. You will find info about smartmontools software architecture and tutorials and guidelines from our developers there.
License
All content in this wiki is published under GNU GPL.
