| Version 76 (modified by , 13 years ago) ( diff ) |
|---|
News
- 2011-04-19:Help wanted! We are looking for a
maintainer / developer of smartmontools OpenBSD port
- 2011-02-04: We added experimental support for disks behind Intel Matrix RAID driver on Windows. Please try
current
version from SVN and report your test results to the
smartmontools
support mailinglist. A precompiled package is available
here.
- 2011-01-26: Intel released
Firmware
update 2CV102M3 for Intel X18-M/X25-M/X25-V G2 (34nm) SSDs.
Changes include improvements to SMART attributes and a fix for possible
drive hangs when reading SMART self-test log.
- 2010-12-09: Samsung released an
important
firmware patch for HD155UI and HD204UI.
WARNING: Do not use smartmontools with these drives
unless this patch is already installed. This warning also applies to other
tools (like hdparm) which use IDENTIFY DEVICE to obtain drive information. See
this page
for details.
- 2010-11-08: The software collection DVD from German
c't magazine 24/2010
includes smartmontools 5.40-1 and
GSmartControl
0.8.5-4 for Windows.
- 2010-10-16: We released
version 5.40 of Smartmontools.
See the NEWS file
and the ticket report to
get a summary of the changes and new features.
- 2010-09-13: Samsung released a
Firmware
update for F3/F3EG to fix problems with AMD SB850 southbridge.
- 2010-09-01: We added the ability to display and clear the timed workload
attributes of Intel X25 SSDs.
- 2010-08-20: We added support for SSDs with SandForce controller. Only a few drive models are detected
for now. If you have a drive not detected, please report this to our
drive
database mailinglist.
- 2010-04-27: We added a new SVN branch RELEASE_5_39_DRIVEDB with a
drivedb.h
file that can be used to update
the drive database of smartmontools 5.39 and 5.39.1.
Table of Contents
About Smartmontools
The smartmontools package contains two utility programs (smartctl and smartd)
to control and monitor storage systems using the Self-Monitoring, Analysis and
Reporting Technology System (SMART) built into most modern ATA and SCSI harddisks.
In many cases, these utilities will provide advanced warning of disk degradation and failure.
Smartmontools was originally derived from the Linux smartsuite package and actually supports ATA/ATAPI/SATA-3 to -8 disks and SCSI disks and tape devices. It should run on any modern Darwin (Mac OS X), Linux, FreeBSD, NetBSD, OpenBSD, Solaris, OS/2, Cygwin, QNX, eComStation or Windows system. Smartmontools can also be run from one of many different bootable CDs or floppies.
Due to OS-specific issues and also depending on the different state of smartmontools development on the platforms, device support is not the same for all OS platforms. We provide info about RAID-controller support here on the homepage and of course in the manpages.
Thanks to Alexander Shaduri, there is also a graphical user interface for smartctl
available. Go to the Homepage of GSmartControl
to get all info and the software itself. Have a look at the
screenshots
and the feature list
to get an impression of this nice tool.
License
All content in this wiki is published under GNU GPL.
