| Version 4 (modified by , 3 years ago) ( diff ) |
|---|
Smartmontools USB Device Support (continued)
Back to Supported Devices page.
Unsupported Devices
| Description | USB bridge | idVendor:idProduct (bcdDevice) | iManufacturer / iProduct | Option(s) | Tested on | Author / Reference | Comment |
|---|---|---|---|---|---|---|---|
| Delock 91648 | Genesis logic | 0x05e3:0x0727 | USB 2.0 SD card adapter | -d sat -T permissive | Arch Linux | ProBackup.nl | SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported. |
| Thecus y.e.s. nano N1050 OTG/USB Photo Bank | ALi M5637 | 0x0402:0x5621 | ALi Corp. / USB 2.0 IDE Controller | -d scsi | Arch Linux | Da truche | Disk Model and Capacity are shown, then 'Terminate command early due to bad response to IEC mode page' (-d scsi -T verypermissive |
| (No Name) | ALi M5621 | 0x0402:0x5621 | (empty) / (empty) | -- | -- | ML-Archive | |
| Connectland BE-USB2-35BP-LCM | VIA VT6204 | 0x040d:0x6204 (0.04) | VIA Technologies Inc. / USB 2.0 IDE Bridge | -- | Linux (Debian Squeeze) | freebooter | |
| (No Name) | Cypress | 0x04b4:0x6830 | ? | -- | WinXP | ML-Archive | |
| TrekStor DataStation maxi y.u | Cypress CY7C68300A | 0x04b4:0x6830 (0.01) | (empty) / (empty) | -- | -- | Christian Franke | Older AT2 chip may not support ATACB command. |
| (No Name) IDE-USB Adapter | Myson Century CS8818 | 0x04cf:0x8818 | Myson Century, Inc. / USB Mass Storage Device | -- | -- | ML-Archive | |
| (No Name) | Myson Century CS8818 | 0x04cf:0x8818 (0xb007) | ? | -- | -- | ML-Archive | |
| LogiLink CR0035 USB 2.0 Card Reader w/ 6-Port Hub | Alcor Micro AU6477CL | 0x058f:0x6364 (1.00) | -- | -- | Linux MINT LMDE (7.0) | Andreas Mohr | Tested w/ CF TS16GCF150 industrial (CF specs say SMART support, and confirmed: works on PCMCIA adapter with -T permissive -s on). Minimal info only via -d scsi, sat/sat,12/sat,16 fail. Related datasheets don't mention SAT. Mfct. inquiry (twice) unsuccessful (see ML). |
| (No Name) China reader in transparent blue case | Alcor Micro AU6371 | 0x058f:0x6366 (1.00) | -- | -- | Linux Debian (6.0.7) | Andreas Mohr | Minimal info only via -d scsi (where "scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0" occurs), sat/sat,12/sat,16 fail. |
| Iomega MDHD500-U | ? | 0x059b:0x0275 (0.01) | Iomega / External HD | -- | -- | ML-Archive | Unknown USB bridge. |
| LaCie Hard Disk (FA Porsche design) | ? | 0x059f:0x0651 | ? | -- | -- | EMail from Marc | Unknown USB bridge. See also newer model above. |
| TrekStor DataStation maxi x.u USB 2.0 200G | Genesys Logic GL881E | 0x05e3:0x0702 | ? | -d sat,auto | Arch Linux 3.17.6 | ML-Archive | Maybe works, but SMART information is unavailable. Ticket #242 |
| Micron Technology USB SSD | ? | 0x0634:0x0655 | Micron Technology / Real SSD eUSB 4GB | -- | Linux | Ticket #133 | |
| SAMSUNG HM121HC | Prolific PL2506 | 0x067b:0x2506 (0x100) | ODSONIC Co.,Ltd / ODSONIC Mass Storage Device B | -T verypermissive -a -d usbjmicron,x,1 | linux | you want get usable information | |
| PremiumCord KU3IDE3 | Prolific PL2773 + JMD330 | 0x067b:0x2773 (1.00) | Prolific Technology Inc. + JMicron? / USB3.0 to SATAII or IDE bridge | -- | Linux | Martin Mokrejs | no S.M.A.R.T. information, aside from that SATA port works, IDE only sometimes |
| Tacens Portum Duo II USB 3.0 SATA Dual Docking Station | Prolific Technology Inc. | 0x067b:0x2773 (1.00) | Prolific Technology Inc. | -- | Linux (Kernel 4.2-rc2) | noq2 | no S.M.A.R.T. information, just: Unknown USB bridge [0x067b:0x2773 (0x100)] |
| (No Name) | Prolific PL3507 | 0x067b:0x3507 (0.01) | Prolific Technology Inc. / ATAPI-6 Bridge Controller | -- | -- | ML-Archive | No reply from Prolific to our request for information. PL3507 datasheets seem to be less available now, but they were called ds_pl3507_v15B.pdf and ds_pl3507_v13.pdf. Given the age of these controllers, probably no pass-through implemented at all. The newer PL2771 does get supplied with iSMART s/w... |
| Freecom FHD-2 Pro 60GB | Cypress CY7C68310 | 0x07ab:0xfc81 (1.00) | Freecom Technologies/FHD-2pro | -d usbcypress | Linux | Jo Deisenhofer | tested with svn 2009-10-25, does not work |
| Freecom Classic HD 120GB (Art.Nr.22917) | ? | 0x07ab:0xfccd | ? | -- | WinXP | porg | |
| (No Name) | Oxford OXU921DS | 0x0928:0x0002 (0.00) | Oxford Semiconductor Ltd. / OXSEMI Mass Storage | -- | Linux (Debian Squeeze) | freebooter | |
| Maxtor OneTouch 200GB | ? | 0x0d49:0x7010 (2.00) | Maxtor / OneTouch | -- | Linux | Manfred Schwarb | |
| MadDog USB+1394 3.5in ATA case | Initio 316000 | 0x13fd:0x0540 | ? | -- | WinXP | ML-Archive | See also older model above. |
| Transcend TS32GSSD18M-M SSD USB/SATA MLC | JMicron JMF601(? first rev due to PID 0x0601?) | 0x152d:0x0601 (1.00) | Transcend TS32GSSD18M-M | -- | Linux (Debian Squeeze) | Andreas Mohr | eSATA: working e.g. via SITECOM eSATA Cardbus Card CB-040 v1 001; USB: not working - on Linux at least, "smartctl -r ioctl,3 -i" always aborts with SCSI_ASC_UNKNOWN_FIELD for both sat and usbjmicron (see also standardized usb_stor_sense_invalidCDB array as used by Linux transport.c, cypress_atacb.c!!), for both std SCSI SAT_ATA_PASSTHROUGH_16 command CDBs (issuing ATA_IDENTIFY_DEVICE) and vendor-specific SCSI cmd CDBs. Strongly suspect another JMicron US_FL_IGNORE_RESIDUE issue as listed in unusual_devs.h (TODO: try to add working entry, or cross-examine behaviour on Other OS [tm]) |
| OCZ THROTTLE OCZESATATHR8G | JMicron JMF601 | 0x152d:0x0602 (1.00) | OCZ / THROTTLE | -- | Linux (Debian Squeeze) | freebooter | |
| Vantec NST-400MX-SR | Silicon Image 5744 | 0x1a4a:0x1670 (0x062) | Silicon Image, Inc / 5744 FW:1.1576 | -- | Linux | Unknown USB bridge, tested with 5.39.1 | |
| RaidSonic ICY BOX IB-273StU3 | Innostor IS888 | 0x1f75:0x0888 (0.15) | Innostor Technology / IS888 USB3.0 to SATA bridge | -- | Linux (Debian Squeeze) | freebooter | |
| Sharkoon SATA QuickDeck Pro (USB 3.0) | Innostor IS888 | 0x1f75:0x0888 | Innostor Technology Corp. / IS888 USB3.0 to SATA controller | -- | Windows 7, Linux | Christian Franke, Linux User 330250 | IS888: official, other |
| ICY BOX IB-351StU3-B | ? | 0x2109:0x0700 (0x005) | ICY BOX | -- | Linux 3.3 | tygier | smartctl 5.41 reports "Unknown USB bridge" |
| Sharkoon SATA QuickDeck U3 FireWire | ? | 0x0525:0x3102 | ? | USB 3.0: -d sat -x; eSATA: -- | Mac OS X, Linux, Windows 7 | Linux User 330250 | This external enclosure identifies all disks as "eSATA-2 ExternalRAID" and while it seems to support SMART, in reallity it disguises the real disk and reports unknown SMART attributes. |
| AcomData HDEUHE-504 | OnSpec ? | 0x55aa:0x2b00 (1.00) | (empty) / USB 2.0 CF/HDD | -- | -- | ML-Archive | |
| Seagate Expansion Desktop Drive 8 TB SRD0NF2 | ? | 0x0bc2:0x3322 | ? | -d sat, -d scsi | Arch Linux 4.20.8 | benbergman | scsi option is only one which produces any output without error. Output: SMART support is: Available - device has SMART capability. SMART support is: Disabled
|
| Seagate Desktop Drive 8 TB stgy8000400 040B | ? | 0x0bc2:0x3343 | ? | -d sat, -d scsi | Linux Mint 5.4.0-80 | anonymous | scsi option is only one which produces any output without error. Output: SMART support is: Available - device has SMART capability. SMART support is: Disabled
|
Note:
See TracWiki
for help on using the wiki.
