{{{ #!div style="border: 1pt solid; float:right; background-color: #E6E6FA; padding:10px; margin-right:30px; margin-top:20px; margin-left:30px" {{{ #!html Index }}} }}} = Smartmontools USB Device Support (continued) = Back to [wiki:Supported_USB-Devices Supported Devices] page. ---- === Unsupported Devices === ||= '''Description''' =||= '''USB bridge''' =||= '''[http://www.linux-usb.org/usb.ids idVendor:idProduct] (bcdDevice)''' =||= '''iManufacturer / iProduct''' =||= '''Option(s)''' =||= '''Tested on''' =||= '''Author / Reference''' ||= '''Comment''' =|| || Delock 91648 || Genesis logic || 0x05e3:0x0727 || USB 2.0 SD card adapter || -d sat -T permissive || Arch Linux || ProBackup.nl || SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 82-83 don't show if SMART supported. || || Thecus y.e.s. nano N1050 OTG/USB Photo Bank || ALi M5637 || 0x0402:0x5621 || ALi Corp. / USB 2.0 IDE Controller || -d scsi || Arch Linux || [https://twitter.com/lliseil Da truche] || Disk Model and Capacity are shown, then 'Terminate command early due to bad response to IEC mode page' (-d scsi -T verypermissive || || (No Name) || ALi M5621 || 0x0402:0x5621 || (empty) / (empty) || -- || -- || [http://sourceforge.net/mailarchive/forum.php?thread_name=1271350889.3255.75.camel%40adrastea.tcw.local&forum_name=smartmontools-support ML-Archive] || || || Connectland BE-USB2-35BP-LCM || VIA VT6204 || 0x040d:0x6204 (0.04) || VIA Technologies Inc. / USB 2.0 IDE Bridge || -- || Linux (Debian Squeeze) || freebooter || || || (No Name) || Cypress || 0x04b4:0x6830 || ? || -- || WinXP || [http://sourceforge.net/mailarchive/forum.php?thread_name=4AEF2976.16272.44C2E0E%40Webbed.Pete.gmail.com&forum_name=smartmontools-support ML-Archive] || || || !TrekStor !DataStation maxi y.u || Cypress CY7C68300A || 0x04b4:0x6830 (0.01) || (empty) / (empty) || -- || -- || Christian Franke || Older AT2 chip may not support ATACB command. || || (No Name) IDE-USB Adapter || Myson Century CS8818 || 0x04cf:0x8818 || Myson Century, Inc. / USB Mass Storage Device || -- || -- || [http://sourceforge.net/mailarchive/forum.php?thread_name=1268152612.24133.10.camel%40Steve.wireless.node1internet.com&forum_name=smartmontools-support ML-Archive] || || || (No Name) || Myson Century CS8818 || 0x04cf:0x8818 (0xb007) || ? || -- || -- || [http://sourceforge.net/mailarchive/forum.php?thread_name=4AB497D8.8060109%40os2.kiev.ua&forum_name=smartmontools-support ML-Archive] || || || !LogiLink CR0035 USB 2.0 Card Reader w/ 6-Port Hub || Alcor Micro AU6477CL || 0x058f:0x6364 (1.00) || -- || -- || Linux MINT LMDE (7.0) || Andreas Mohr || Tested w/ CF TS16GCF150 industrial (CF specs say SMART support, and confirmed: works on PCMCIA adapter with -T permissive -s on). Minimal info only via -d scsi, sat/sat,12/sat,16 fail. Related datasheets don't mention SAT. Mfct. inquiry (twice) unsuccessful (see ML). || || (No Name) China reader in transparent blue case || Alcor Micro AU6371 || 0x058f:0x6366 (1.00) || -- || -- || Linux Debian (6.0.7) || Andreas Mohr || Minimal info only via -d scsi (where "scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0" occurs), sat/sat,12/sat,16 fail. || || Iomega MDHD500-U || ? || 0x059b:0x0275 (0.01) || Iomega / External HD || -- || -- || [http://sourceforge.net/mailarchive/forum.php?thread_name=20090630013842.16187e94%40linux.localdomain&forum_name=smartmontools-support ML-Archive] || Unknown USB bridge. || || !LaCie Hard Disk (FA Porsche design) || ? || 0x059f:0x0651 || ? || -- || -- || EMail from Marc || Unknown USB bridge. See also newer model above. || || !TrekStor !DataStation maxi x.u USB 2.0 200G || Genesys Logic GL881E || 0x05e3:0x0702 || ? || -d sat,auto || Arch Linux 3.17.6 || [http://sourceforge.net/mailarchive/forum.php?thread_name=200911021330.36578.hanno%40hboeck.de&forum_name=smartmontools-support ML-Archive] || Maybe works, but SMART information is unavailable. Ticket #242 || || Micron Technology USB SSD || ? || 0x0634:0x0655 || Micron Technology / Real SSD eUSB 4GB || -- || Linux || Ticket #133 || || || SAMSUNG HM121HC || Prolific PL2506 || 0x067b:0x2506 (0x100) || ODSONIC Co.,Ltd / ODSONIC Mass Storage Device B || -T verypermissive -a -d usbjmicron,x,1 || linux || || you want get usable information || || !PremiumCord KU3IDE3 || Prolific PL2773 + JMD330 || 0x067b:0x2773 (1.00) || Prolific Technology Inc. + JMicron? / USB3.0 to SATAII or IDE bridge || -- || Linux || Martin Mokrejs || no S.M.A.R.T. information, aside from that SATA port works, IDE only sometimes || || Tacens Portum Duo II USB 3.0 SATA Dual Docking Station || Prolific Technology Inc. || 0x067b:0x2773 (1.00) || Prolific Technology Inc. || -- || Linux (Kernel 4.2-rc2) || noq2 || no S.M.A.R.T. information, just: Unknown USB bridge [0x067b:0x2773 (0x100)] || || (No Name) || Prolific PL3507 || 0x067b:0x3507 (0.01) || Prolific Technology Inc. / ATAPI-6 Bridge Controller || -- || -- || [http://sourceforge.net/mailarchive/forum.php?thread_name=1241388896.6114.21.camel%40manfred.adslplus.ch&forum_name=smartmontools-support ML-Archive] || No reply from Prolific to our request for information. PL3507 datasheets seem to be less available now, but they were called ds_pl3507_v15B.pdf and ds_pl3507_v13.pdf. Given the age of these controllers, probably no pass-through implemented at all. The newer PL2771 does get supplied with iSMART s/w... || || Freecom FHD-2 Pro 60GB || Cypress CY7C68310 || 0x07ab:0xfc81 (1.00) || Freecom Technologies/FHD-2pro || -d usbcypress || Linux || Jo Deisenhofer || tested with svn 2009-10-25, does not work || || Freecom Classic HD 120GB (Art.Nr.22917) || ? || 0x07ab:0xfccd || ? || -- || WinXP || porg || || || (No Name) || Oxford OXU921DS || 0x0928:0x0002 (0.00) || Oxford Semiconductor Ltd. / OXSEMI Mass Storage || -- || Linux (Debian Squeeze) || freebooter || || || Maxtor !OneTouch 200GB || ? || 0x0d49:0x7010 (2.00) || Maxtor / !OneTouch || -- || Linux || Manfred Schwarb || || || !MadDog USB+1394 3.5in ATA case || Initio 316000 || 0x13fd:0x0540 || ? || -- || WinXP || [http://sourceforge.net/mailarchive/forum.php?thread_name=4AEF2976.16272.44C2E0E%40Webbed.Pete.gmail.com&forum_name=smartmontools-support ML-Archive] || See also older model above. || || Transcend TS32GSSD18M-M SSD USB/SATA MLC || JMicron JMF601(? first rev due to PID 0x0601?) || 0x152d:0x0601 (1.00) || Transcend TS32GSSD18M-M || -- || Linux (Debian Squeeze) || Andreas Mohr || eSATA: working e.g. via SITECOM eSATA Cardbus Card CB-040 v1 001; USB: not working - on Linux at least, "smartctl -r ioctl,3 -i" always aborts with SCSI_ASC_UNKNOWN_FIELD for both sat and usbjmicron (see also standardized usb_stor_sense_invalidCDB array as used by Linux transport.c, cypress_atacb.c!!), for both std SCSI SAT_ATA_PASSTHROUGH_16 command CDBs (issuing ATA_IDENTIFY_DEVICE) and vendor-specific SCSI cmd CDBs. Strongly suspect another JMicron US_FL_IGNORE_RESIDUE issue as listed in unusual_devs.h (TODO: try to add working entry, or cross-examine behaviour on Other OS [tm]) || || OCZ THROTTLE OCZESATATHR8G || JMicron JMF601 || 0x152d:0x0602 (1.00) || OCZ / THROTTLE || -- || Linux (Debian Squeeze) || freebooter || || || Vantec NST-400MX-SR || Silicon Image 5744 || 0x1a4a:0x1670 (0x062) || Silicon Image, Inc / 5744 FW:1.1576 || -- || Linux || || Unknown USB bridge, tested with 5.39.1 || || !RaidSonic ICY BOX IB-273StU3 || Innostor IS888 || 0x1f75:0x0888 (0.15) || Innostor Technology / IS888 USB3.0 to SATA bridge || -- || Linux (Debian Squeeze) || freebooter || || || Sharkoon SATA !QuickDeck Pro (USB 3.0) || Innostor IS888 || 0x1f75:0x0888 || Innostor Technology Corp. / IS888 USB3.0 to SATA controller || -- || Windows 7, Linux || Christian Franke, Linux User 330250 || IS888: [http://www.innostor.com/Product_IS888.html official], [http://files.migera.ru/is888.pdf other] || || ICY BOX IB-351StU3-B || ? || 0x2109:0x0700 (0x005) || ICY BOX || -- || Linux 3.3 || tygier || smartctl 5.41 reports "Unknown USB bridge" || || Sharkoon SATA !QuickDeck U3 !FireWire || ? || 0x0525:0x3102 || ? || USB 3.0: -d sat -x; eSATA: -- || Mac OS X, Linux, Windows 7 || [https://sourceforge.net/mailarchive/message.php?msg_id=30572975 Linux User 330250] || This external enclosure identifies all disks as "eSATA-2 ExternalRAID" and while it seems to support SMART, in reallity it disguises the real disk and reports unknown SMART attributes. || || !AcomData HDEUHE-504 || !OnSpec ? || 0x55aa:0x2b00 (1.00) || (empty) / USB 2.0 CF/HDD || -- || -- || [http://sourceforge.net/mailarchive/forum.php?thread_name=h9el7f%24cnm%241%40ger.gmane.org&forum_name=smartmontools-support ML-Archive] || || || Seagate Expansion Desktop Drive 8 TB SRD0NF2 || ? || 0x0bc2:0x3322 || ? || -d sat, -d scsi || Arch Linux 4.20.8 || benbergman || scsi option is only one which produces any output without error. Output: `SMART support is: Available - device has SMART capability. SMART support is: Disabled` || ----