Changes between Version 4 and Version 5 of TocSupport


Ignore:
Timestamp:
09/28/2009 12:30:11 PM (10 years ago)
Author:
Gabriele Pohl
Comment:

I didn't suceed in transferring the SCSI articles content to a new wiki page. It's always cut off.. :-( Therefore link to homepage article instead

Legend:

Unmodified
Added
Removed
Modified
  • TocSupport

    v4 v5  
    2727
    2828==== Documentation On Device Support ====
     29 * [http://smartmontools.sourceforge.net/smartmontools_scsi.html SCSI devices and smartmontools] - This article by [http://sourceforge.net/users/dpgilbert/ Douglas Gilbert] describes how smartmontools interacts with SCSI devices like disks and tapes (including medium changers). Passing reference is also made to devices that use the SCSI command set such as USB mass storage devices and IEEE1394 devices that use the "sbp2" protocol. In many situations SATA disks are accessed using a (partial) SCSI command set.
    2930 * [wiki:USB USB devices and smartmontools] - To access SMART functionality, smartmontools must be able to send ATA commands directly to the disk.
    3031 * [wiki:NAS NAS devices and smartmontools] - Smartmontools can work also on ''Network Attached Storage'' (NAS) devices, if the appropiate functions are available there, e.g. on Dlink DNS-323 with [http://www.inreto.de/dns323/fun-plug/ fonz firmware]
    31  * [wiki:SCSI SCSI devices and smartmontools] - This article by [http://sourceforge.net/users/dpgilbert/ Douglas Gilbert] describes how smartmontools interacts with SCSI devices like disks and tapes (including medium changers). Passing reference is also made to devices that use the SCSI command set such as USB mass storage devices and IEEE1394 devices that use the "sbp2" protocol. In many situations SATA disks are accessed using a (partial) SCSI command set.