wiki:NVMe_Support

Version 15 (modified by Christian Franke, 8 years ago) ( diff )

Announce NetBSD support

Smartmontools NVMe support

About NVMe

VM Express, NVMe, or Non-Volatile Memory Host Controller Interface Specification (NVMHCI), is a logical device interface specification for accessing non-volatile storage media attached via PCI Express (PCIe) bus. Some links related to the standard and vendor-specific implementations provided below:

Smartmontools NVMe support

Smartmontools supports NVMe starting from version 6.5. Please note, that currently NVMe support is considered as experimental. Currently implemented features:

  • Basic information about controller name, firmware, capacity (smartctl -i)
  • Controller and namespace capabilities (smartctl -c)
  • SMART overall-health self-assessment test result and warnings (smartctl -H)
  • NVMe SMART attributes (smartctl -A)
  • NVMe error log (smartctl -l error[,NUM])
  • Ability to fetch any nvme log (smartctl -l nvmelog,N,SIZE)
  • The smartd daemon tracks health (-H), error count (-l error) and temperature (-W DIFF,INFO,CRIT)

Currently NVMe support is implemented on Linux, Windows and FreeBSD. Details about supported version/driver combinations are provided in the next section.

NVMe support in the different OS

OS and driverSupported by OSSupported by SmartmontoolsNative management toolsNotes
Linux, since kernel version 3.3nvme-cli, nvme-user
FreeBSD 9.2 or laternvmecontrol
NetBSD (✓) (✓) nvmectl NVMe support will be available in upcoming NetBSD 8.0. Smartmontools supports this since r4343.
OpenBSD (✓) - ?? NVMe support will be available in upcoming OpenBSD 6.0.
OSX 10.10.3+ native NVMe support - Only Apple-branded NVMe devices are supported, monitoring API is implemented (NVMeSMARTClient) but not documented. It is also possible to use this driver with non-Apple devices using patch-nvme project.
OSX with MacVidCards NVMe driver - nvme-cli tool distributed with the driver IOCTL format is not documented, driver is closed source and seems to be abandoned
Oracle Solaris 11.2+ - nvmeadm Interface is not documented
IllumOS NVMe driver - not yet implemented no management interface/tool yet implemented
Windows with OpenFabrics compatible NVMe driver Various vendor specific tools Devices are accessed via NVME_PASS_THROUGH I/O-control. Successfully tested with NVMe drivers from Intel, OCZ/Toshiba and Samsung. Does not work with Intel RST drivers or Microsoft NVMe drivers.
Windows 7 to 2012.R2 with Microsoft NVMe driver (✓) - ?? Older Microsoft NVMe drivers do not provide a NVMe pass-through I/O-control.
Windows 10 with Microsoft NVMe driver - ?? IOCTL_STORAGE_PROTOCOL_COMMAND is not yet supported by smartmontools.

Sample smartctl output

Sample smartctl -x output:

smartctl 6.5 2016-04-27 r4312 [x86_64-w64-mingw32-win10] (daily-20160427)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       Samsung SSD 950 PRO 256GB
Serial Number:                      ...
Firmware Version:                   1B0QBXX7
PCI Vendor/Subsystem ID:            0x144d
IEEE OUI Identifier:                0x002538
Controller ID:                      1
Number of Namespaces:               1
Namespace 1 Size/Capacity:          256,060,514,304 [256 GB]
Namespace 1 Utilization:            117,410,267,136 [117 GB]
Namespace 1 Formatted LBA Size:     512
Local Time is:                      Thu Apr 28 19:32:07 2016 CEST
Firmware Updates (0x06):            3 Slots
Optional Admin Commands (0x0007):   Security Format Frmw_DL
Optional NVM Commands (0x001f):     Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat
Maximum Data Transfer Size:         32 Pages

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +     6.50W       -        -    0  0  0  0        5       5
 1 +     5.80W       -        -    1  1  1  1       30      30
 2 +     3.60W       -        -    2  2  2  2      100     100
 3 -   0.0700W       -        -    3  3  3  3      500    5000
 4 -   0.0050W       -        -    4  4  4  4     2000   22000

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
 0 +     512       0         0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02, NSID 0xffffffff)
Critical Warning:                   0x00
Temperature:                        40 Celsius
Available Spare:                    100%
Available Spare Threshold:          10%
Percentage Used:                    0%
Data Units Read:                    1,769,281 [905 GB]
Data Units Written:                 1,384,224 [708 GB]
Host Read Commands:                 24,646,213
Host Write Commands:                19,105,374
Controller Busy Time:               38
Power Cycles:                       32
Power On Hours:                     129
Unsafe Shutdowns:                   6
Media and Data Integrity Errors:    0
Error Information Log Entries:      44

Error Information (NVMe Log 0x01, max 64 entries)
Num   ErrCount  SQId   CmdId  Status  PELoc          LBA  NSID    VS
  0         44     0  0x002a  0x4016  0x000            0   255     -
  1         43     0  0x0029  0x4016  0x000            0   255     -
  2         42     0  0x0049  0x4016  0x000            0   255     -
  3         41     0  0x0048  0x4016  0x000            0   255     -
  4         40     0  0x001f  0x4004  0x000            0     0     -
  5         39     0  0x001e  0x4004  0x000            0     0     -
  6         38     0  0x001f  0x4004  0x000            0     0     -
  7         37     0  0x001e  0x4004  0x000            0     0     -
  8         36     0  0x001f  0x4004  0x000            0     0     -
  9         35     0  0x001e  0x4004  0x000            0     0     -
 10         34     0  0x001d  0x4004  0x000            0     0     -
 11         33     0  0x001c  0x4004  0x000            0     0     -
 12         32     0  0x001d  0x4004  0x000            0     0     -
 13         31     0  0x001c  0x4004  0x000            0     0     -
 14         30     0  0x001d  0x4004  0x000            0     0     -
 15         29     0  0x001c  0x4004  0x000            0     0     -
... (28 entries not shown)

Development notes

Development and debugging could be performed using QEMU fork which can emulates NVMe device with most of the features supported, including SMART log pages, namespaces, etc. Tested with Linux and FreeBSD, full list of the options could be found in the source code. The NVMe emulation in the upstream version of QEMU (2.7.0) is still more limited (single namespace, no log pages).

VirtualBox 5.1.0 or later also provides basic NVMe emulation.

See list of the NVMe related tickets if you want to improve smartmontools NVMe support.

Note: See TracWiki for help on using the wiki.