| 200 | | </pre> |
| 201 | | <pre> |
| 202 | | --- template from old report --- |
| 203 | | Vendor Specific SMART Attributes with Thresholds: |
| 204 | | ID# <b><a href="TocDoc#SMARTAttributes" title="If your drive is not in the database, the names of the Attributes may be incorrect. Also note that starting with ATA/ATAPI-4, revision 4, the meaning of these Attribute fields have been made /entirely vendor-specific/. We collect info about the SMART attributes in separate wiki pages for the different vendors. Click the link to get there and choose the appropriate one."><font color="blue">ATTRIBUTE_NAME<font></a></b> FLAG <b><a href="TocDoc#SMARTAttributes" title="These are /NORMALIZED/ attribute values in the range 1-254. They are calculated by the vendors firmware using his detailed knowledge of the disk's operations and failure mode. Smartmontools only /report/ these."><font color="blue">VALUE<font></a></b> <b><a href="#Worst" title="This is the smallest (/closest to failure/) value that the disk has recorded at any time during its lifetime when SMART was enabled."><font color="browne">WORST</font></a></b> <b><a href="#Thresh" title="Each Attribute also has a Threshold value (whose range is 0 to 255). If the Normalized value (printed in column VALUE) is less than or equal to the Threshold value, then the Attribute is said to have failed. If the Attribute is a pre-failure Attribute, then disk failure is imminent."><font color="red">THRESH</font></a></b> <b><a href="#Attribute_Type" title="Attributes are one of two possible types: /Pre-fail/ or /Old_age/. Pre-failure Attributes are ones which, if less than or equal to their threshold values, indicate pending disk failure. Old age, or usage Attributes, are ones which indicate end-of-product life from old-age or normal aging and wearout, if the Attribute value is less than or equal to the threshold."><font color="DarkGreen">TYPE</font></a></b> <b><a href="#When_Udated" title="Info in column /UPDATED/ shows if the SMART Attribute values are updated during both normal operation and off-line testing, or only during offline testing. The former are labeled /Always/ and the latter are labeled /Offline/"><font color="DarkGreen">UPDATED</font></a></b> <b><a href="#When_Failed" title="If the Attribute's current /Normalized value/ is less than or equal to the threshold value, then the /WHEN_FAILED/ column will display /FAILING_NOW/. If not, but the worst recorded value is less than or equal to the threshold value, then this column will display /In_the_past/. If the /WHEN_FAILED/ column has no entry (indicated by a dash: '-') then this Attribute is OK now (not failing) and has also never failed in the past."><font color="red">WHEN_FAILED</font></a></b> <b><a href="#Raw_Value" title="Each Attribute has a /Raw/ value. [Note: smartctl prints these values in base-10.] Vendors use their own algorithms to convert this to a /Normalized/ value in the range from 1 to 254. (See column /Value/"><font color="blue">RAW_VALUE</font></a></b> |
| 205 | | 1 Raw_Read_Error_Rate 0x000f 054 051 006 Pre-fail Always - 141524796 |
| 206 | | 3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0 |
| 207 | | 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 176 |
| 208 | | 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 |
| 209 | | 7 Seek_Error_Rate 0x000f 080 060 030 Pre-fail Always - 117208349 |
| 210 | | 9 Power_On_Hours 0x0032 071 071 000 Old_age Always - 25921 |
| 211 | | 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 |
| 212 | | 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1745 |
| 213 | | 194 Temperature_Celsius 0x0022 043 053 000 Old_age Always - 43 |
| 214 | | 195 Hardware_ECC_Recovered 0x001a 054 051 000 Old_age Always - 141524796 |
| 215 | | 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 |
| 216 | | 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 |
| 217 | | 199 UDMA_CRC_Error_Count 0x003e 200 197 000 Old_age Always - 4 |
| 218 | | 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 |
| 219 | | 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 |
| 220 | | |
| 221 | | SMART Error Log Version: 1 |
| 222 | | No Errors Logged |
| 223 | | |
| 224 | | SMART Self-test log structure revision number 1 |
| 225 | | Num Test_Description Status Remaining LifeTime(hours) <b><a href="http://smartmontools.sourceforge.net/badblockhowto.html" title="If you find not a hyphen, but a number in this row, then the test found a /bad block/ at the listed logical block address (LBA). Follow this link to read our /Bad block HOWTO/. It gives instructions to solve this sort of problem."><font color="red">LBA_of_first_error</font></a></b> |
| 226 | | # 1 Extended offline Completed without error 00% 20014 - |
| 227 | | # 2 Short offline Completed without error 00% 20009 - |
| 228 | | # 3 Short offline Completed without error 00% 19992 - |
| 229 | | # 4 Extended offline Completed without error 00% 19989 - |
| 230 | | # 5 Short offline Completed without error 00% 11827 - |
| 231 | | # 6 Short offline Completed without error 00% 11803 - |
| 232 | | # 7 Short offline Completed without error 00% 11780 - |
| 233 | | # 8 Short offline Completed without error 00% 11756 - |
| 234 | | # 9 Extended offline Completed without error 00% 11751 - |
| 235 | | #10 Short offline Completed without error 00% 11732 - |
| 236 | | #11 Short offline Completed without error 00% 11709 - |
| 237 | | #12 Extended offline Completed without error 00% 11690 - |
| 238 | | #13 Short offline Completed without error 00% 11686 - |
| 239 | | #14 Short offline Completed without error 00% 11679 - |
| 240 | | #15 Short offline Completed without error 00% 11674 - |
| 241 | | #16 Short offline Completed without error 00% 11650 - |
| 242 | | #17 Short offline Completed without error 00% 11626 - |
| 243 | | #18 Short offline Completed without error 00% 11611 - |
| 244 | | #19 Short offline Completed without error 00% 11598 - |
| 245 | | #20 Short offline Completed without error 00% 11590 - |
| 246 | | #21 Short offline Completed without error 00% 11582 - |
| 247 | | |
| 248 | | SMART Selective self-test log data structure revision number 1 |
| 249 | | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
| 250 | | 1 0 0 Not_testing |
| 251 | | 2 0 0 Not_testing |
| 252 | | 3 0 0 Not_testing |
| 253 | | 4 0 0 Not_testing |
| 254 | | 5 0 0 Not_testing |
| 255 | | Selective self-test flags (0x0): |
| 256 | | After scanning selected spans, do NOT read-scan remainder of disk. |
| 257 | | If Selective self-test is pending on power-up, resume after 0 minute delay. |
