| | 1 | {{{ |
| | 2 | #!html |
| | 3 | <pre> |
| | 4 | <b># smartctl -qnoserial -a /dev/sdb</b> |
| | 5 | smartctl 5.39 2009-09-04 r2902 [i686-pc-linux-gnu] (local build) |
| | 6 | Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net |
| | 7 | |
| | 8 | === START OF INFORMATION SECTION === |
| | 9 | Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family |
| | 10 | Device Model: ST380011A |
| | 11 | Firmware Version: 3.04 |
| | 12 | User Capacity: 80.026.361.856 bytes |
| | 13 | Device is: In smartctl database [for details use: -P show] |
| | 14 | ATA Version is: 6 |
| | 15 | ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 |
| | 16 | Local Time is: Tue Sep 29 19:50:43 2009 CEST |
| | 17 | SMART support is: Available - device has SMART capability. |
| | 18 | SMART support is: Enabled |
| | 19 | |
| | 20 | === START OF READ SMART DATA SECTION === |
| | 21 | SMART overall-health self-assessment test result: PASSED |
| | 22 | |
| | 23 | General SMART Values: |
| | 24 | Offline data collection status: (0x82) Offline data collection activity |
| | 25 | was completed without error. |
| | 26 | Auto Offline Data Collection: Enabled. |
| | 27 | Self-test execution status: ( 0) The previous self-test routine completed |
| | 28 | without error or no self-test has ever |
| | 29 | been run. |
| | 30 | Total time to complete Offline |
| | 31 | data collection: ( 430) seconds. |
| | 32 | Offline data collection |
| | 33 | capabilities: (0x5b) SMART execute Offline immediate. |
| | 34 | Auto Offline data collection on/off support. |
| | 35 | Suspend Offline collection upon new |
| | 36 | command. |
| | 37 | Offline surface scan supported. |
| | 38 | Self-test supported. |
| | 39 | No Conveyance Self-test supported. |
| | 40 | Selective Self-test supported. |
| | 41 | SMART capabilities: (0x0003) Saves SMART data before entering |
| | 42 | power-saving mode. |
| | 43 | Supports SMART auto save timer. |
| | 44 | Error logging capability: (0x01) Error logging supported. |
| | 45 | No General Purpose Logging support. |
| | 46 | Short self-test routine |
| | 47 | recommended polling time: ( 1) minutes. |
| | 48 | Extended self-test routine |
| | 49 | recommended polling time: ( 58) minutes. |
| | 50 | |
| | 51 | SMART Attributes Data Structure revision number: 10 |
| | 52 | Vendor Specific SMART Attributes with Thresholds: |
| | 53 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE |
| | 54 | 1 Raw_Read_Error_Rate 0x000f 054 051 006 Pre-fail Always - 141524796 |
| | 55 | 3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0 |
| | 56 | 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 176 |
| | 57 | 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 |
| | 58 | 7 Seek_Error_Rate 0x000f 080 060 030 Pre-fail Always - 117208349 |
| | 59 | 9 Power_On_Hours 0x0032 071 071 000 Old_age Always - 25921 |
| | 60 | 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 |
| | 61 | 12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1745 |
| | 62 | 194 Temperature_Celsius 0x0022 043 053 000 Old_age Always - 43 |
| | 63 | 195 Hardware_ECC_Recovered 0x001a 054 051 000 Old_age Always - 141524796 |
| | 64 | 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 |
| | 65 | 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 |
| | 66 | 199 UDMA_CRC_Error_Count 0x003e 200 197 000 Old_age Always - 4 |
| | 67 | 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 |
| | 68 | 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 |
| | 69 | |
| | 70 | SMART Error Log Version: 1 |
| | 71 | No Errors Logged |
| | 72 | |
| | 73 | SMART Self-test log structure revision number 1 |
| | 74 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
| | 75 | # 1 Extended offline Completed without error 00% 20014 - |
| | 76 | # 2 Short offline Completed without error 00% 20009 - |
| | 77 | # 3 Short offline Completed without error 00% 19992 - |
| | 78 | # 4 Extended offline Completed without error 00% 19989 - |
| | 79 | # 5 Short offline Completed without error 00% 11827 - |
| | 80 | # 6 Short offline Completed without error 00% 11803 - |
| | 81 | # 7 Short offline Completed without error 00% 11780 - |
| | 82 | # 8 Short offline Completed without error 00% 11756 - |
| | 83 | # 9 Extended offline Completed without error 00% 11751 - |
| | 84 | #10 Short offline Completed without error 00% 11732 - |
| | 85 | #11 Short offline Completed without error 00% 11709 - |
| | 86 | #12 Extended offline Completed without error 00% 11690 - |
| | 87 | #13 Short offline Completed without error 00% 11686 - |
| | 88 | #14 Short offline Completed without error 00% 11679 - |
| | 89 | #15 Short offline Completed without error 00% 11674 - |
| | 90 | #16 Short offline Completed without error 00% 11650 - |
| | 91 | #17 Short offline Completed without error 00% 11626 - |
| | 92 | #18 Short offline Completed without error 00% 11611 - |
| | 93 | #19 Short offline Completed without error 00% 11598 - |
| | 94 | #20 Short offline Completed without error 00% 11590 - |
| | 95 | #21 Short offline Completed without error 00% 11582 - |
| | 96 | |
| | 97 | SMART Selective self-test log data structure revision number 1 |
| | 98 | SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
| | 99 | 1 0 0 Not_testing |
| | 100 | 2 0 0 Not_testing |
| | 101 | 3 0 0 Not_testing |
| | 102 | 4 0 0 Not_testing |
| | 103 | 5 0 0 Not_testing |
| | 104 | Selective self-test flags (0x0): |
| | 105 | After scanning selected spans, do NOT read-scan remainder of disk. |
| | 106 | If Selective self-test is pending on power-up, resume after 0 minute delay. |
| | 107 | </pre> |
| | 108 | }}} |
