== smartctl report for HUS154545VLS300 == === Command === Access via MegaRAID SAS 1078 controller: {{{smartctl -x -q noserial ..}}} === Output === {{{ smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-RELEASE-p16 amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: HITACHI Product: HUS154545VLS300 Revision: D522 User Capacity: 450,098,159,616 bytes [450 GB] Logical block size: 512 bytes Rotation Rate: 15000 rpm Device type: disk Transport protocol: SAS (SPL-3) Local Time is: Tue Mar 14 21:49:32 2017 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Disabled or Not Supported Read Cache is: Enabled Writeback Cache is: Disabled === START OF READ SMART DATA SECTION === SMART Health Status: OK Current Drive Temperature: 36 C Drive Trip Temperature: 85 C Manufactured in week 48 of year 2008 Specified cycle count over device lifetime: 50000 Accumulated start-stop cycles: 32 Elements in grown defect list: 0 Vendor (Seagate) cache information Blocks sent to initiator = 62140123709440 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 0 9 0 9 2244 8.745 0 write: 0 7950 0 7950 7978 242.625 0 verify: 0 475104 0 475104 497209 118830.415 30 Non-medium error count: 0 SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background long Completed 11 5640 - [- - -] # 2 Background long Completed 11 469 - [- - -] # 3 Background long Completed 11 2 - [- - -] # 4 Background short Completed 11 1 - [- - -] Long (extended) Self Test duration: 4363 seconds [72.7 minutes] Background scan results log Status: waiting until BMS interval timer expires Accumulated power on time, hours:minutes 10762:29 [645749 minutes] Number of background scans performed: 422, scan progress: 0.00% Number of background medium scans performed: 0 # when lba(hex) [sk,asc,ascq] reassign_status 1 96:41 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 2 93:37 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 3 90:33 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 4 87:30 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 5 83:49 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 6 80:45 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 7 77:42 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 8 74:38 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 9 71:34 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 10 68:30 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 11 65:26 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 12 62:22 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 13 59:18 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 14 56:14 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 15 53:11 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 16 50:07 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 17 47:03 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 18 43:59 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 19 40:55 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 20 37:51 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 21 34:47 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 22 31:43 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 23 28:40 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 24 25:36 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 25 22:32 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 26 19:28 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 27 16:24 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 28 13:20 0000000000000000 [3,3,0] Require Write or Reassign Blocks command 29 8:14 0000000000000000 [3,3,0] Require Write or Reassign Blocks command Protocol Specific port log page for SAS SSP relative target port id = 1 generation code = 0 number of phys = 1 phy identifier = 0 attached device type: SAS or SATA device attached reason: unknown reason: unknown negotiated logical link rate: phy enabled; 3 Gbps attached initiator port: ssp=1 stp=1 smp=1 attached target port: ssp=0 stp=0 smp=0 SAS address = 0x5000cca0091af0e9 attached SAS address = 0x50022190a744c003 attached phy identifier = 3 Invalid DWORD count = 332 Running disparity error count = 265 Loss of DWORD synchronization = 266 Phy reset problem = 0 relative target port id = 2 generation code = 0 number of phys = 1 phy identifier = 1 attached device type: no device attached attached reason: unknown reason: unknown negotiated logical link rate: phy enabled; unknown attached initiator port: ssp=0 stp=0 smp=0 attached target port: ssp=0 stp=0 smp=0 SAS address = 0x5000cca0091af0ea attached SAS address = 0x0 attached phy identifier = 0 Invalid DWORD count = 0 Running disparity error count = 0 Loss of DWORD synchronization = 0 Phy reset problem = 0 }}}