Changes between Initial Version and Version 1 of Examples_HUS154545VLS300


Ignore:
Timestamp:
Mar 18, 2017, 4:32:05 PM (5 years ago)
Author:
Gabriele Pohl
Comment:

Contributed by Dan Lukes. Thanks!

Legend:

Unmodified
Added
Removed
Modified
  • Examples_HUS154545VLS300

    v1 v1  
     1== smartctl report for HUS154545VLS300 ==
     2
     3=== Command ===
     4
     5Access via MegaRAID SAS 1078 controller: {{{smartctl -x -q noserial ..}}}
     6
     7
     8=== Output ===
     9
     10{{{
     11smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-RELEASE-p16 amd64] (local build)
     12Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
     13
     14=== START OF INFORMATION SECTION ===
     15Vendor:               HITACHI
     16Product:              HUS154545VLS300
     17Revision:             D522
     18User Capacity:        450,098,159,616 bytes [450 GB]
     19Logical block size:   512 bytes
     20Rotation Rate:        15000 rpm
     21Device type:          disk
     22Transport protocol:   SAS (SPL-3)
     23Local Time is:        Tue Mar 14 21:49:32 2017 CET
     24SMART support is:     Available - device has SMART capability.
     25SMART support is:     Enabled
     26Temperature Warning:  Disabled or Not Supported
     27Read Cache is:        Enabled
     28Writeback Cache is:   Disabled
     29
     30=== START OF READ SMART DATA SECTION ===
     31SMART Health Status: OK
     32
     33Current Drive Temperature:     36 C
     34Drive Trip Temperature:        85 C
     35
     36Manufactured in week 48 of year 2008
     37Specified cycle count over device lifetime:  50000
     38Accumulated start-stop cycles:  32
     39Elements in grown defect list: 0
     40
     41Vendor (Seagate) cache information
     42  Blocks sent to initiator = 62140123709440
     43
     44Error counter log:
     45           Errors Corrected by           Total   Correction     Gigabytes    Total
     46               ECC          rereads/    errors   algorithm      processed    uncorrected
     47           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
     48read:          0        9         0         9       2244          8.745           0
     49write:         0     7950         0      7950       7978        242.625           0
     50verify:        0   475104         0    475104     497209     118830.415          30
     51
     52Non-medium error count:        0
     53
     54SMART Self-test log
     55Num  Test              Status                 segment  LifeTime  LBA_first_err [SK ASC ASQ]
     56     Description                              number   (hours)
     57# 1  Background long   Completed                  11    5640                 - [-   -    -]
     58# 2  Background long   Completed                  11     469                 - [-   -    -]
     59# 3  Background long   Completed                  11       2                 - [-   -    -]
     60# 4  Background short  Completed                  11       1                 - [-   -    -]
     61
     62Long (extended) Self Test duration: 4363 seconds [72.7 minutes]
     63
     64Background scan results log
     65  Status: waiting until BMS interval timer expires
     66    Accumulated power on time, hours:minutes 10762:29 [645749 minutes]
     67    Number of background scans performed: 422,  scan progress: 0.00%
     68    Number of background medium scans performed: 0
     69
     70   #  when        lba(hex)    [sk,asc,ascq]    reassign_status
     71   1   96:41  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     72   2   93:37  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     73   3   90:33  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     74   4   87:30  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     75   5   83:49  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     76   6   80:45  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     77   7   77:42  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     78   8   74:38  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     79   9   71:34  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     80  10   68:30  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     81  11   65:26  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     82  12   62:22  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     83  13   59:18  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     84  14   56:14  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     85  15   53:11  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     86  16   50:07  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     87  17   47:03  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     88  18   43:59  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     89  19   40:55  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     90  20   37:51  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     91  21   34:47  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     92  22   31:43  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     93  23   28:40  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     94  24   25:36  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     95  25   22:32  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     96  26   19:28  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     97  27   16:24  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     98  28   13:20  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     99  29    8:14  0000000000000000  [3,3,0]   Require Write or Reassign Blocks command
     100
     101Protocol Specific port log page for SAS SSP
     102relative target port id = 1
     103  generation code = 0
     104  number of phys = 1
     105  phy identifier = 0
     106    attached device type: SAS or SATA device
     107    attached reason: unknown
     108    reason: unknown
     109    negotiated logical link rate: phy enabled; 3 Gbps
     110    attached initiator port: ssp=1 stp=1 smp=1
     111    attached target port: ssp=0 stp=0 smp=0
     112    SAS address = 0x5000cca0091af0e9
     113    attached SAS address = 0x50022190a744c003
     114    attached phy identifier = 3
     115    Invalid DWORD count = 332
     116    Running disparity error count = 265
     117    Loss of DWORD synchronization = 266
     118    Phy reset problem = 0
     119relative target port id = 2
     120  generation code = 0
     121  number of phys = 1
     122  phy identifier = 1
     123    attached device type: no device attached
     124    attached reason: unknown
     125    reason: unknown
     126    negotiated logical link rate: phy enabled; unknown
     127    attached initiator port: ssp=0 stp=0 smp=0
     128    attached target port: ssp=0 stp=0 smp=0
     129    SAS address = 0x5000cca0091af0ea
     130    attached SAS address = 0x0
     131    attached phy identifier = 0
     132    Invalid DWORD count = 0
     133    Running disparity error count = 0
     134    Loss of DWORD synchronization = 0
     135    Phy reset problem = 0
     136}}}