== smartctl report for EG0146FAWHU == === Command === Access via HP Smart Array controller: {{{smartctl -d cciss,3 -q noserial -x /dev/sda}}} === Output === {{{ smartctl 5.43 2012-06-30 r3573 [x86_64-linux-2.6.32-642.13.1.el6.centos.plus.x86_64] (local build) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net /dev/sda [cciss_disk_03] [SCSI]: Device open changed type from 'sat,auto' to 'cciss' Vendor: HP Product: EG0146FAWHU Revision: HPDF User Capacity: 146,815,737,856 bytes [146 GB] Logical block size: 512 bytes Device type: disk Transport protocol: SAS Local Time is: Sun Mar 19 13:23:31 2017 CET Device supports SMART and is Enabled Temperature Warning Enabled SMART Health Status: OK Current Drive Temperature: 39 C Drive Trip Temperature: 65 C Elements in grown defect list: 2 Vendor (Seagate) cache information Blocks sent to initiator = 1616406451 Blocks received from initiator = 2528545986 Blocks read from cache and sent to initiator = 4134560162 Number of read and write commands whose size <= segment size = 1108615172 Number of read and write commands whose size > segment size = 0 Vendor (Seagate/Hitachi) factory information number of hours powered up = 55491.72 number of minutes until next internal SMART test = 8 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 0 9 0 3457984800 0 427330.737 0 write: 0 0 0 0 0 3560.808 0 Non-medium error count: 48 SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background short Completed - 46843 - [- - -] # 2 Background short Completed - 46819 - [- - -] # 3 Background short Completed - 46795 - [- - -] # 4 Background long Completed - 46773 - [- - -] # 5 Background short Completed - 46771 - [- - -] # 6 Background short Completed - 46747 - [- - -] # 7 Background short Completed - 46723 - [- - -] # 8 Background short Completed - 46699 - [- - -] # 9 Background short Completed - 46675 - [- - -] #10 Background short Completed - 46651 - [- - -] #11 Background short Completed - 46627 - [- - -] #12 Background long Completed - 46605 - [- - -] #13 Background short Completed - 46603 - [- - -] #14 Background short Completed - 46579 - [- - -] #15 Background short Completed - 46555 - [- - -] #16 Background short Completed - 46531 - [- - -] #17 Background short Completed - 46507 - [- - -] #18 Background short Completed - 46483 - [- - -] #19 Background short Completed - 46459 - [- - -] #20 Background long Completed - 46437 - [- - -] Long (extended) Self Test duration: 1570 seconds [26.2 minutes] Background scan results log Status: waiting until BMS interval timer expires Accumulated power on time, hours:minutes 55491:43 [3329503 minutes] Number of background scans performed: 2152, scan progress: 0.00% Number of background medium scans performed: 2152 # when lba(hex) [sk,asc,ascq] reassign_status 33024 21708:31 0008012701180900 [f,3,7e] Reserved [0x0] 33025 34882:38 0008012401180900 [f,1,56] Reserved [0x0] 33026 41201:47 0008012b01180900 [f,fe,ab] Reserved [0x0] Protocol Specific port log page for SAS SSP relative target port id = 1 generation code = 0 number of phys = 1 phy identifier = 0 attached device type: end device attached reason: unknown reason: hard reset negotiated logical link rate: phy enabled; 6 Gbps attached initiator port: ssp=1 stp=1 smp=1 attached target port: ssp=0 stp=0 smp=0 SAS address = 0x5000c5002bdd5c6d attached SAS address = 0x5001438009600560 attached phy identifier = 3 Invalid DWORD count = 0 Running disparity error count = 0 Loss of DWORD synchronization = 29271 Phy reset problem = 0 Phy event descriptors: Invalid word count: 0 Running disparity error count: 0 Loss of dword synchronization count: 29271 Phy reset problem count: 0 relative target port id = 2 generation code = 0 number of phys = 1 phy identifier = 1 attached device type: no device attached attached reason: unknown reason: unknown negotiated logical link rate: phy enabled; 1.5 Gbps attached initiator port: ssp=0 stp=0 smp=0 attached target port: ssp=0 stp=0 smp=0 SAS address = 0x5000c5002bdd5c6e attached SAS address = 0x0 attached phy identifier = 0 Invalid DWORD count = 0 Running disparity error count = 0 Loss of DWORD synchronization = 0 Phy reset problem = 0 Phy event descriptors: Invalid word count: 0 Running disparity error count: 0 Loss of dword synchronization count: 0 Phy reset problem count: 0 }}}