id summary reporter owner description type status priority milestone component version resolution keywords cc 823 Add CoreRise Comay BladeDrive E28 800GB spacedust "Please add it to the smartctl database. It's a PCI-Express SSD card. All missing SMART parameters are attached. {{{ smartctl 6.6 2017-03-11 r4410 [x86_64-w64-mingw32-win7-sp1] (daily-20170311) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Comay BladeDrive E28 800GB Serial Number: ADDC13RHM64MPDDT2Y LU WWN Device Id: 5 000000 361c23f9f Firmware Version: 2.71 User Capacity: 800 241 745 920 bytes [800 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Mar 24 23:34:33 2017 SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0021) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_ FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0033 095 095 050 Pre-fail Always - 274400134 5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always - 0 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 2608 (203 116 0) 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 43 13 Read_Soft_Error_Rate 0x0032 095 095 000 Old_age Always - 274400134 100 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 2877 170 Unknown_Attribute 0x0040 000 000 000 Old_age Offline - 68096 171 Unknown_Attribute 0x000a 100 100 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 36 177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline - 0 181 Program_Fail_Cnt_Total 0x000a 100 100 000 Old_age Always - 0 182 Erase_Fail_Count_Total 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x00b4 100 100 090 Old_age Offline - 0 187 Reported_Uncorrect 0x0012 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0022 052 052 000 Old_age Always - 52 (Min/Max 37/52) 195 Hardware_ECC_Recovered 0x001c 120 120 000 Old_age Offline - 274400134 196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0 198 Offline_Uncorrectable 0x0010 120 120 000 Old_age Offline - 3874060500992 199 UDMA_CRC_Error_Count 0x0090 200 200 000 Old_age Offline - 0 201 Unknown_SSD_Attribute 0x001c 120 120 000 Old_age Offline - 274400134 204 Soft_ECC_Correction 0x001c 120 120 000 Old_age Offline - 274400134 230 Unknown_SSD_Attribute 0x0013 100 100 000 Pre-fail Always - 0 231 Temperature_Celsius 0x0013 100 100 010 Pre-fail Always - 0 232 Available_Reservd_Space 0x0032 000 000 000 Old_age Always - 264 233 Media_Wearout_Indicator 0x0032 000 000 000 Old_age Always - 2536 234 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 2824 235 Unknown_Attribute 0x0033 100 100 002 Pre-fail Always - 0 241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always - 2824 242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always - 3792 SMART Error Log not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. }}} " enhancement new minor Release 6.6 drivedb