Add CoreRise Comay BladeDrive E28 800GB

[spacedust]

Please add it to the smartctl database. It's a PCI-Express SSD card.

All missing SMART parameters are attached.

smartctl 6.6 2017-03-11 r4410 [x86_64-w64-mingw32-win7-sp1] (daily-20170311)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     Comay BladeDrive E28 800GB
Serial Number:    ADDC13RHM64MPDDT2Y
LU WWN Device Id: 5 000000 361c23f9f
Firmware Version: 2.71
User Capacity:    800 241 745 920 bytes [800 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Mar 24 23:34:33 2017
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed

                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (    0) seconds.
Offline data collection
capabilities:                    (0x79) SMART execute Offline immediate.
                                        No Auto Offline data collection support.

                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  48) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x0021) SCT Status supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_
FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0033   095   095   050    Pre-fail  Always       -
       274400134
  5 Reallocated_Sector_Ct   0x0033   100   100   003    Pre-fail  Always       -
       0
  9 Power_On_Hours          0x0032   098   098   000    Old_age   Always       -
       2608 (203 116 0)
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -
       43
 13 Read_Soft_Error_Rate    0x0032   095   095   000    Old_age   Always       -
       274400134
100 Unknown_Attribute       0x0032   000   000   000    Old_age   Always       -
       2877
170 Unknown_Attribute       0x0040   000   000   000    Old_age   Offline      -
       68096
171 Unknown_Attribute       0x000a   100   100   000    Old_age   Always       -
       0
172 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -
       0
174 Unknown_Attribute       0x0030   000   000   000    Old_age   Offline      -
       36
177 Wear_Leveling_Count     0x0000   000   000   000    Old_age   Offline      -
       0
181 Program_Fail_Cnt_Total  0x000a   100   100   000    Old_age   Always       -
       0
182 Erase_Fail_Count_Total  0x0032   100   100   000    Old_age   Always       -
       0
184 End-to-End_Error        0x00b4   100   100   090    Old_age   Offline      -
       0
187 Reported_Uncorrect      0x0012   100   100   000    Old_age   Always       -
       0
194 Temperature_Celsius     0x0022   052   052   000    Old_age   Always       -
       52 (Min/Max 37/52)
195 Hardware_ECC_Recovered  0x001c   120   120   000    Old_age   Offline      -
       274400134
196 Reallocated_Event_Count 0x0033   100   100   003    Pre-fail  Always       -
       0
198 Offline_Uncorrectable   0x0010   120   120   000    Old_age   Offline      -
       3874060500992
199 UDMA_CRC_Error_Count    0x0090   200   200   000    Old_age   Offline      -
       0
201 Unknown_SSD_Attribute   0x001c   120   120   000    Old_age   Offline      -
       274400134
204 Soft_ECC_Correction     0x001c   120   120   000    Old_age   Offline      -
       274400134
230 Unknown_SSD_Attribute   0x0013   100   100   000    Pre-fail  Always       -
       0
231 Temperature_Celsius     0x0013   100   100   010    Pre-fail  Always       -
       0
232 Available_Reservd_Space 0x0032   000   000   000    Old_age   Always       -
       264
233 Media_Wearout_Indicator 0x0032   000   000   000    Old_age   Always       -
       2536
234 Unknown_Attribute       0x0032   000   000   000    Old_age   Always       -
       2824
235 Unknown_Attribute       0x0033   100   100   002    Pre-fail  Always       -
       0
241 Total_LBAs_Written      0x0032   000   000   000    Old_age   Always       -
       2824
242 Total_LBAs_Read         0x0032   000   000   000    Old_age   Always       -
       3792

SMART Error Log not supported

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

[spacedust]

CrystalDiskInfo screen