USB bridge 0x059f:0x1075 not recognized

[Freso]

> sudo smartctl -a /dev/sdb
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.6.4-1-ARCH] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/sdb: Unknown USB bridge [0x059f:0x1075 (0x000)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

I found #624 and tried with -d sat which worked, so I did the steps outlined at https://www.smartmontools.org/wiki/Download#Updatethedrivedatabase :

> sudo smartctl -t short /dev/sdb -d sat
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.6.4-1-ARCH] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line mode".
Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 1 minutes for test to complete.
Test will complete after Tue Jul 26 20:13:34 2016

Use smartctl -X to abort test.
> sudo smartctl -x /dev/sdb -d sat > smartctl-0x059f-0x1075.txt

[Freso]

smartctl -x output

[Christian Franke]

r4326, r4328.