Opened 8 years ago
Last modified 8 years ago
#678 closed defect
Seagate ST8000NM0075 unsupported — at Initial Version
| Reported by: | Joseph Wu | Owned by: | |
|---|---|---|---|
| Priority: | minor | Milestone: | Release 6.5 |
| Component: | all | Version: | 6.4 |
| Keywords: | scsi | Cc: |
Description
It appears that the Seagate ST8000NM0075 behind a LSI 9300-8i running FW P10 doesn't display much SMART information.
Running command: smartctl -t short /dev/da0
smartctl 6.4 2015-06-04 r4109 [FreeBSD 10.3-RELEASE amd64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
Short Background Self Test has begun
Use smartctl -X to abort test
Works just fine... but.. smartctl -a shows:
smartctl 6.4 2015-06-04 r4109 [FreeBSD 10.3-RELEASE amd64] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
START OF INFORMATION SECTION
Vendor: SEAGATE
Product: ST8000NM0075
Revision: E001
Compliance: SPC-4
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Logical block size: 512 bytes
Physical block size: 4096 bytes
LB provisioning type: unreported, LBPME=0, LBPRZ=0
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000c50XXXXXXXX
Serial number: ZA10XXXXXXXXXXXXX
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Tue Mar 29 20:57:14 2016 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
START OF READ SMART DATA SECTION
SMART Health Status: OK
Elements in grown defect list: 0
Error Counter logging not supported
Device does not support Self Test logging
