Opened 4 years ago

Closed 4 years ago

Last modified 4 years ago

#631 closed enhancement (fixed)

Drive WDC WD4003FZEX needs to be added to smart database

Reported by: opentoe Owned by:
Priority: minor Milestone: Release 6.5
Component: drivedb Version: 6.4
Keywords: Cc:

Description (last modified by Christian Franke)

smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.1.13-unRAID] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD4003FZEX-00Z4SA0
Serial Number:    WD-WCC130966733
LU WWN Device Id: 5 0014ee 25e2bd767
Firmware Version: 01.01A01
User Capacity:    4,000,787,030,016 bytes [4.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sun Jan 10 16:18:42 2016 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(41640) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 451) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x7035)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   137   136   021    -    12125
  4 Start_Stop_Count        -O--CK   100   100   000    -    68
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   077   077   000    -    17417
 10 Spin_Retry_Count        -O--CK   100   253   000    -    0
 11 Calibration_Retry_Count -O--CK   100   253   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    67
192 Power-Off_Retract_Count -O--CK   200   200   000    -    34
193 Load_Cycle_Count        -O--CK   200   200   000    -    33
194 Temperature_Celsius     -O---K   111   098   000    -    41
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   200   200   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   200   200   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      6  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters
0x24       GPL     R/O      1  Current Device Internal Status Data log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa0-0xa7  GPL,SL  VS      16  Device vendor specific log
0xa8-0xb7  GPL,SL  VS       1  Device vendor specific log
0xbd       GPL,SL  VS       1  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xc1       GPL     VS      93  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     17417         -
# 2  Short offline       Completed without error       00%     17416         -
# 3  Short offline       Completed without error       00%     12833         -
# 4  Short offline       Completed without error       00%     12332         -
# 5  Short offline       Completed without error       00%     11348         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    41 Celsius
Power Cycle Min/Max Temperature:     36/42 Celsius
Lifetime    Min/Max Temperature:     18/54 Celsius
Under/Over Temperature Limit Count:   0/0
SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -41/85 Celsius
Temperature History Size (Index):    478 (247)

Index    Estimated Time   Temperature Celsius
 248    2016-01-10 08:21    41  **********************
 ...    ..(238 skipped).    ..  **********************
   9    2016-01-10 12:20    41  **********************
  10    2016-01-10 12:21    42  ***********************
 ...    ..( 15 skipped).    ..  ***********************
  26    2016-01-10 12:37    42  ***********************
  27    2016-01-10 12:38    41  **********************
 ...    ..(219 skipped).    ..  **********************
 247    2016-01-10 16:18    41  **********************

SCT Error Recovery Control command not supported

Device Statistics (GP Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2            3  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            4  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x8000  4        95739  Vendor specific

Attachments (1)

smartctl-WDC-WD4003FZEX.txt (8.2 KB) - added by opentoe 4 years ago.
add drive to smart database

Download all attachments as: .zip

Change History (7)

Changed 4 years ago by opentoe

Attachment: smartctl-WDC-WD4003FZEX.txt added

add drive to smart database

comment:1 Changed 4 years ago by Christian Franke

Component: alldrivedb
Description: modified (diff)
Milestone: Release 6.5
Priority: majorminor
Type: defectenhancement

comment:2 Changed 4 years ago by Alex Samorukov

According to http://www.wdc.com/wdproducts/library/SpecSheet/ENG/2879-771434.pdf:

MODEL NUMBERS
WD6001FZWX
WD2003FZEX
WD5001FZWX
WD1003FZEX
WD4003FZEX
WD5003AZEX
WD3003FZEX

WD Black

So we should extend drivedb.h:

   3163   { "Western Digital Black", // tested with
   3164       // WDC WD5003AZEX-00RKKA0/80.00A80, WDC WD1003FZEX-00MK2A0/01.01A01,
   3165       // WDC WD3001FAEX-00MJRA0/01.01L01, WDC WD4001FAEX-00MJRA0/01.01L01
   3166     "WDC WD(5002AAL|5003AZE|(64|75)02AAE|((10|15|20)0[23]|[34]001)F[AZ]E)X-.*",
   3167     "", "", ""
   3168   },

This regexp also wrongly mentioning drives from Western Digital Caviar Black family:

MODEL NUMBERS
WD2002FAEX
WD7502AAEX
WD1502FAEX
WD5003AZEX
WD1002FAEX
WD5002AALX
see http://www.wdc.com/wdproducts/library/SpecSheet/ENG/2879-701276.pdf. We need to change it to match only "Black" and make sure that Caviar entry matching all Caviar drives.

Last edited 4 years ago by Alex Samorukov (previous) (diff)

comment:3 Changed 4 years ago by Alex Samorukov

Fixed in r4202

comment:4 Changed 4 years ago by Alex Samorukov

Resolution: fixed
Status: newclosed

comment:5 Changed 4 years ago by Alex Samorukov

Summary: Drive needs to be added to smart databaseDrive WDC WD4003FZEX needs to be added to smart database

comment:6 Changed 4 years ago by Christian Franke

Merged in r4220.

Note: See TracTickets for help on using tickets.