id,summary,reporter,owner,description,type,status,priority,milestone,component,version,resolution,keywords,cc 598,Windows hangs after smartd is started,david,,"Hello, 6.4.1 blocks the T3600 DELL PC (over the keyboard response) when the service starts, when the auto -d option is specified in the smartd.conf If the debug (smartd -d) below {{{ smartd 6.4 2015-06-04 r4109 [x86_64-w64-mingw32-win7-sp1] (sf-6.4-1) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org Opened configuration file C:/Program Files/SmartMon.old/smartd.conf Configuration file C:/Program Files/SmartMon.old/smartd.conf was parsed, found DEVICESCAN, scanning devices Device: /dev/sda [SAT], opened Device: /dev/sda [SAT], WDC WD5000AAKX-75U6AA0, S/N:WD-WCC2EU802806, WWN:5-0014ee-2b29c36c5, FW:19.01H19, 500 GB Device: /dev/sda [SAT], found in smartd database: Western Digital Blue Device: /dev/sda [SAT], not capable of SMART Health Status check CHECK POWER MODE: incomplete response, ATA output registers missing Device: /dev/sda [SAT], no ATA CHECK POWER STATUS support, ignoring -n Directive Device: /dev/sda [SAT], is SMART capable. Adding to ""monitor"" list. Device: /dev/sdb [SAT], opened Device: /dev/sdb [SAT], WDC WD5000AAKX-75U6AA0, S/N:WD-WCC2EU614318, WWN:5-0014ee-207f17163, FW:19.01H19, 500 GB Device: /dev/sdb [SAT], found in smartd database: Western Digital Blue Device: /dev/sdb [SAT], not capable of SMART Health Status check CHECK POWER MODE: incomplete response, ATA output registers missing Device: /dev/sdb [SAT], no ATA CHECK POWER STATUS support, ignoring -n Directive Device: /dev/sdb [SAT], is SMART capable. Adding to ""monitor"" list. Device: /dev/csmi0,0, opened Device: /dev/csmi0,0, packet devices [this device CD/DVD] not SMART capable Unable to register ATA device /dev/csmi0,0 at line 1 of file C:/Program Files/SmartMon.old/smartd.conf Device: /dev/csmi1,0, opened Device: /dev/csmi1,0, not ATA, no IDENTIFY DEVICE Structure Unable to register ATA device /dev/csmi1,0 at line 1 of file C:/Program Files/SmartMon.old/smartd.conf Device: /dev/csmi1,1, opened Device: /dev/csmi1,1, WDC WD5000AAKX-75U6AA0, S/N:WD-WCC2EU614318, WWN:5-0014ee-207f17163, FW:19.01H19, 500 GB Device: /dev/csmi1,1, found in smartd database: Western Digital Blue Device: /dev/csmi1,1, is SMART capable. Adding to ""monitor"" list. Monitoring 3 ATA and 0 SCSI devices Device: /dev/sda [SAT], opened ATA device }}} After this line is completely blocked windows, windows of a sudden stop is needed to stop :( If the ATA option is indicated in the smartd.conf, the drives are not recognized (it has no windows blocking) ",defect,closed,major,,smartd,6.4,worksforme,windows,