Opened 10 years ago
Closed 9 years ago
#548 closed defect (fixed)
smartctl mistakenly reports error where none is...
Reported by: | Dave Purdy | Owned by: | Christian Franke |
---|---|---|---|
Priority: | minor | Milestone: | Release 6.5 |
Component: | smartctl | Version: | 6.3 |
Keywords: | Cc: |
Description
The offending line/output is:
SMART Status command failed: scsi error medium or hardware error (serious)
I noticed this odd behavior when I upgraded from smartmontools from 5.41 to 6.4 (automatically triggered in Debian when diet-upgrading from Wheezy to Jessie).
I had several SATA drives (SSD and rotational) that I had tested when connected via SATA and they tested fine, in both 5.41 and in 6.4. When connected to a supported USB FA-GoFlex Desk device, it worked fine under 5.41. After upgrading to 6.4, I saw this erroneous output :
smartctl 6.4 2014-10-07 r4002 [armv5tel-linux-3.14.0-kirkwood-tld-1] (local build) Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD10EFRX-68FYTN0 Serial Number: WD-WCC4J4YR09FP LU WWN Device Id: 5 0014ee 2b64e6f60 Firmware Version: 82.00A82 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Sat May 9 16:52:44 2015 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Status command failed: scsi error medium or hardware error (serious) SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13620) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 155) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 100 253 021 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 0 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 0 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 4 194 Temperature_Celsius 0x0022 114 114 000 Old_age Always - 29 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 0 - # 2 Short offline Completed without error 00% 0 - # 3 Short offline Completed without error 00% 0 - # 4 Short offline Completed without error 00% 0 - # 5 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Again, this has been replicated w/ known good drives. Downgrading to 5.41 mitigates the error.
Change History (8)
comment:1 by , 10 years ago
Milestone: | Release 6.4 → undecided |
---|
comment:2 by , 10 years ago
Below is the output you requested. ( This is with a 2-day-old WDC Red NAS 1TB drive that I just received and installed. )
smartctl -r ioctl,2 -i -H /dev/sdb smartctl 5.41 2011-06-09 r3365 [armv5tel-linux-3.14.0-kirkwood-tld-1] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net USB ID = 0x0bc2:0x5070 (0x157) REPORT-IOCTL: Device=/dev/sdb Command=IDENTIFY DEVICE Input: FR=...., SC=0x01, LL=...., LM=...., LH=...., DEV=...., CMD=0xec IN [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=0 milliseconds resid=0 Incoming data, len=512 [only first 256 bytes shown]: 00 7a 42 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 10 00 00 00 00 20 20 20 20 57 20 2d 44 43 57 34 43 20 34 4a 52 59 39 30 50 46 00 00 00 00 00 00 32 38 30 30 2e 41 30 32 38 44 57 20 43 44 57 30 31 46 45 40 58 52 36 2d 46 38 54 59 30 4e 20 20 20 20 20 20 50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 60 00 40 00 2f 01 40 00 00 00 00 07 00 ff 3f 10 00 70 3f 00 10 fc fb 00 00 01 ff ff ff 0f 00 00 07 01 80 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00 90 00 00 00 00 00 00 1f 00 0e 9f 02 00 4c 00 40 00 a0 fe 03 00 00 6b 74 61 7d 33 67 69 74 41 bc 23 67 b0 7f 00 48 00 48 00 00 00 fe ff 00 00 00 00 08 00 c0 00 00 00 00 a0 86 01 00 b0 6d 70 74 00 00 00 00 d0 00 00 00 00 03 60 00 00 01 50 e2 4e 4e b6 60 6f e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1c 40 f0 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 status=0x0 REPORT-IOCTL: Device=/dev/sdb Command=IDENTIFY DEVICE returned 0 ===== [IDENTIFY DEVICE] DATA START (BASE-16) ===== 000-015: 7a 42 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 |zB.?7.......?...| 016-031: 00 00 00 00 20 20 20 20 57 20 2d 44 43 57 34 43 |.... W -DCW4C| 032-047: 34 4a 52 59 39 30 50 46 00 00 00 00 00 00 32 38 |4JRY90PF......28| 048-063: 30 2e 41 30 32 38 44 57 20 43 44 57 30 31 46 45 |0.A028DW CDW01FE| 064-079: 58 52 36 2d 46 38 54 59 30 4e 20 20 20 20 20 20 |XR6-F8TY0N | 080-095: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 | ..| 096-111: 00 40 00 2f 01 40 00 00 00 00 07 00 ff 3f 10 00 |.@./.@.......?..| 112-127: 3f 00 10 fc fb 00 00 01 ff ff ff 0f 00 00 07 01 |?...............| 128-143: 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00 |..x.x.x.x.......| 144-159: 00 00 00 00 00 00 1f 00 0e 9f 02 00 4c 00 40 00 |............L.@.| 160-175: fe 03 00 00 6b 74 61 7d 33 67 69 74 41 bc 23 67 |....kta}3gitA.#g| 176-191: 7f 00 48 00 48 00 00 00 fe ff 00 00 00 00 08 00 |..H.H...........| 192-207: 00 00 00 00 a0 86 01 00 b0 6d 70 74 00 00 00 00 |.........mpt....| 208-223: 00 00 00 00 03 60 00 00 01 50 e2 4e 4e b6 60 6f |.....`...P.NN.`o| 224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1c 40 |...............@| 240-255: 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |.@..............| 256-271: 21 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |!...............| 272-287: 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 00 |................| 288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 400-415: 00 00 00 00 00 00 00 00 00 00 00 00 3d 30 00 00 |............=0..| 416-431: 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 |...@............| 432-447: 00 00 18 15 00 00 00 00 00 00 00 00 3e 10 00 00 |............>...| 448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 464-479: 00 00 00 00 01 00 00 10 00 00 00 00 00 00 00 00 |................| 480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a5 22 |..............."| ===== [IDENTIFY DEVICE] DATA END (512 Bytes) ===== === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD10EFRX-68FYTN0 Serial Number: WD-WCC4J4YR09FP LU WWN Device Id: 5 0014ee 2b64e6f60 Firmware Version: 82.00A82 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: 9 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun May 10 14:49:10 2015 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled REPORT-IOCTL: Device=/dev/sdb Command=SMART READ ATTRIBUTE VALUES Input: FR=0xd0, SC=0x01, LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN [ata pass-through(16): 85 08 0e 00 d0 00 01 00 00 00 4f 00 c2 00 b0 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=0 milliseconds resid=0 Incoming data, len=512 [only first 256 bytes shown]: 00 10 00 01 2f 00 64 fd 00 00 00 00 00 00 00 03 27 10 00 8a 89 fb 0f 00 00 00 00 00 04 32 00 64 64 29 20 00 00 00 00 00 00 05 33 00 c8 c8 00 00 00 00 00 30 00 00 07 2e 00 c8 c8 00 00 00 00 00 00 00 09 32 40 00 64 64 16 00 00 00 00 00 00 0a 32 00 64 fd 00 50 00 00 00 00 00 00 0b 32 00 64 fd 00 00 00 00 00 60 00 00 0c 32 00 64 64 04 00 00 00 00 00 00 c0 32 70 00 c8 c8 01 00 00 00 00 00 00 c1 32 00 c8 c8 55 80 00 00 00 00 00 00 c2 22 00 75 71 1a 00 00 00 00 90 00 00 c4 32 00 c8 c8 00 00 00 00 00 00 00 c5 32 a0 00 c8 c8 00 00 00 00 00 00 00 c6 30 00 64 fd 00 b0 00 00 00 00 00 00 c7 32 00 c8 c8 00 00 00 00 00 c0 00 00 c8 08 00 64 fd 00 00 00 00 00 00 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 status=0x0 REPORT-IOCTL: Device=/dev/sdb Command=SMART READ ATTRIBUTE VALUES returned 0 ===== [SMART READ ATTRIBUTE VALUES] DATA START (BASE-16) ===== 000-015: 10 00 01 2f 00 64 fd 00 00 00 00 00 00 00 03 27 |.../.d.........'| 016-031: 00 8a 89 fb 0f 00 00 00 00 00 04 32 00 64 64 29 |...........2.dd)| 032-047: 00 00 00 00 00 00 05 33 00 c8 c8 00 00 00 00 00 |.......3........| 048-063: 00 00 07 2e 00 c8 c8 00 00 00 00 00 00 00 09 32 |...............2| 064-079: 00 64 64 16 00 00 00 00 00 00 0a 32 00 64 fd 00 |.dd........2.d..| 080-095: 00 00 00 00 00 00 0b 32 00 64 fd 00 00 00 00 00 |.......2.d......| 096-111: 00 00 0c 32 00 64 64 04 00 00 00 00 00 00 c0 32 |...2.dd........2| 112-127: 00 c8 c8 01 00 00 00 00 00 00 c1 32 00 c8 c8 55 |...........2...U| 128-143: 00 00 00 00 00 00 c2 22 00 75 71 1a 00 00 00 00 |.......".uq.....| 144-159: 00 00 c4 32 00 c8 c8 00 00 00 00 00 00 00 c5 32 |...2...........2| 160-175: 00 c8 c8 00 00 00 00 00 00 00 c6 30 00 64 fd 00 |...........0.d..| 176-191: 00 00 00 00 00 00 c7 32 00 c8 c8 00 00 00 00 00 |.......2........| 192-207: 00 00 c8 08 00 64 fd 00 00 00 00 00 00 00 00 00 |.....d..........| 208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 352-367: 00 00 00 00 00 00 00 00 00 00 00 00 34 35 01 7b |............45.{| 368-383: 03 00 01 00 02 9b 05 00 00 00 00 00 00 00 00 00 |................| 384-399: 00 00 01 02 00 00 00 00 00 00 00 00 00 00 00 00 |................| 400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1b |................| ===== [SMART READ ATTRIBUTE VALUES] DATA END (512 Bytes) ===== REPORT-IOCTL: Device=/dev/sdb Command=SMART READ ATTRIBUTE THRESHOLDS Input: FR=0xd1, SC=0x01, LL=0x01, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN [ata pass-through(16): 85 08 0e 00 d1 00 01 00 01 00 4f 00 c2 00 b0 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=0 milliseconds resid=0 Incoming data, len=512 [only first 256 bytes shown]: 00 10 00 01 33 64 64 00 00 00 00 00 00 00 00 03 15 10 00 00 00 00 00 00 00 00 00 00 04 00 00 00 00 00 20 00 00 00 00 00 00 05 8c 00 00 00 00 00 00 00 00 30 00 00 07 00 c8 c8 00 00 00 00 00 00 00 00 09 00 40 00 00 00 00 00 00 00 00 00 00 0a 00 00 00 00 00 50 00 00 00 00 00 00 0b 00 00 00 00 00 00 00 00 00 60 00 00 0c 00 00 00 00 00 00 00 00 00 00 00 c0 00 70 00 00 00 00 00 00 00 00 00 00 c1 00 00 00 00 00 80 00 00 00 00 00 00 c2 00 00 00 00 00 00 00 00 00 90 00 00 c4 00 00 00 00 00 00 00 00 00 00 00 c5 00 a0 00 00 00 00 00 00 00 00 00 00 c6 00 00 00 00 00 b0 00 00 00 00 00 00 c7 00 00 00 00 00 00 00 00 00 c0 00 00 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 status=0x0 REPORT-IOCTL: Device=/dev/sdb Command=SMART READ ATTRIBUTE THRESHOLDS returned 0 ===== [SMART READ ATTRIBUTE THRESHOLDS] DATA START (BASE-16) ===== 000-015: 10 00 01 33 64 64 00 00 00 00 00 00 00 00 03 15 |...3dd..........| 016-031: 00 00 00 00 00 00 00 00 00 00 04 00 00 00 00 00 |................| 032-047: 00 00 00 00 00 00 05 8c 00 00 00 00 00 00 00 00 |................| 048-063: 00 00 07 00 c8 c8 00 00 00 00 00 00 00 00 09 00 |................| 064-079: 00 00 00 00 00 00 00 00 00 00 0a 00 00 00 00 00 |................| 080-095: 00 00 00 00 00 00 0b 00 00 00 00 00 00 00 00 00 |................| 096-111: 00 00 0c 00 00 00 00 00 00 00 00 00 00 00 c0 00 |................| 112-127: 00 00 00 00 00 00 00 00 00 00 c1 00 00 00 00 00 |................| 128-143: 00 00 00 00 00 00 c2 00 00 00 00 00 00 00 00 00 |................| 144-159: 00 00 c4 00 00 00 00 00 00 00 00 00 00 00 c5 00 |................| 160-175: 00 00 00 00 00 00 00 00 00 00 c6 00 00 00 00 00 |................| 176-191: 00 00 00 00 00 00 c7 00 00 00 00 00 00 00 00 00 |................| 192-207: 00 00 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 65 |...............e| ===== [SMART READ ATTRIBUTE THRESHOLDS] DATA END (512 Bytes) ===== === START OF READ SMART DATA SECTION === REPORT-IOCTL: Device=/dev/sdb Command=SMART STATUS CHECK Input: FR=0xda, SC=...., LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 [ata pass-through(16): 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00 ] scsi_status=0x0, host_status=0x7, driver_status=0x8 info=0x1 duration=30 milliseconds resid=0 >>> Sense buffer, len=22: 00 72 04 00 00 00 00 00 0e 09 0c 00 00 00 00 00 00 10 00 4f 00 c2 00 50 status=2: [desc] sense_key=4 asc=0 ascq=0 sat_device::ata_pass_through: scsi error: medium or hardware error (serious) Values from ATA Return Descriptor are: 00 09 0c 00 00 00 00 00 00 00 4f 00 c2 00 50 REPORT-IOCTL: Device=/dev/sdb Command=SMART STATUS CHECK returned -1 errno=5 [scsi error medium or hardware error (serious)] SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check.
comment:3 by , 10 years ago
Priority: | major → minor |
---|
This USB bridge violates SAT standards. It actually reports an error in the sense data of the ATA PASS-THROUGH(16) SCSI command used to issue SMART RETURN STATUS ATA command:
>>> Sense buffer, len=22: 00 72 04!00 00 00 00 00 0e 09 0c 00 00 00 00 00 00 10 00 4f 00 c2 00 50 status=2: [desc] sense_key=4! asc=0 ascq=0
Sense key 4 means HARDWARE ERROR. SAT standards require sense key 1 (RECOVERED ERROR) for ATA PASS-THROUGH sense data returning ATA output registers (SMART RETURN STATUS result).
Therefore it is IMO correct that smartctl assumes that this SCSI command failed, prints a related error message, ignores the returned status info and does an attribute check instead (see Warning:...
).
comment:4 by , 10 years ago
Understood, as developers, you all made it clear that USB support could have some bumps, due to the "rich variety" of bridge devices.
Questions:
? Since smartmontools did function correctly with this USB bridge in version 5.4x (both not flagging "non-errors", and correctly detecting "bad or worrisome attributes"), do you think it is likely that you'll fix or revert whatever change took place between 5.4x and 6.3 ?
? Is there a flag that I could be utilizing to skip a certain SAT command (the one that triggers the error message? I still want to check the attributes, and would love to stick with the functionality that is there in the 5.4x versions. I've read the docs, searched here and there, but haven't seen any way to do that.
comment:5 by , 10 years ago
smartmontools now functions correctly because it both prints the error reported by the USB bridge firmware, and still checks the attributes for failures. :-)
Older versions ignored the SCSI error which resulted in bogus output with other devices. Therefore this fix will not be reverted.
There is no extra flag to skip this SAT command because this specific command is the only one requested if -H
option is set.
Note that the only visible difference between old and new versions is that now these two additional lines are printed:
SMART Status command failed: scsi error medium or hardware error (serious) ... Warning: This result is based on an Attribute check.
To better support such USB bridges with broken SAT layer, it possibly makes sense to heuristically ignore the sense key if a correct SAT ATA RETURN DESCRIPTOR is provided. This requires further investigation, therefore I leave this ticket open as 'undecided' for now.
comment:6 by , 10 years ago
@ Chris : Thanks for clarifying that, I understand what you are saying. I'll set my server to hold my version/package at Debian's 5.41/r3365 for now.
:-)
comment:7 by , 9 years ago
Milestone: | undecided → Release 6.5 |
---|---|
Owner: | set to |
Status: | new → accepted |
A similar problem was reported for an USB device (0x0d49:0x7310) behind Linux Kernel 2.6.32-573.1.1.el6 from CentOS 6.7, see smartmontools-support mailing list.
Please attach output of