Add SanDisk X300s and Apacer 4GB SLC to the drivedb

[jeremy385893]

Please, could you add the following devices in drivedb:

• SSD SanDisk X300s 64GB MLC (SD7SB3Q-64G)
• SSD SanDisk X300s 256GB MLC (SD7SB3Q-256G)
• SSD SanDisk X300s 128GB MLC (SD7SB3Q-128G)

[jeremy385893]

And also the following device:
SATA DOM Apacer 4GB SLC APSDM004G13AN-AT
with the following output:

smartctl -x /dev/ad0
smartctl 6.3 2014-07-26 r3976 [NS-BSD 1.1.3- amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     4GB SATA Flash Drive
Serial Number:    B0514215900900000044
Firmware Version: SFDE001A
User Capacity:    4,011,614,208 bytes [4.01 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Aug 21 13:11:58 2014 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Unavailable
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, frozen [SEC2]
Read SCT Status failed: request failed, error code 0x05
Wt Cache Reorder: Unknown (SCT Feature Control command failed)

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 255)	Self-test routine in progress...
					150% of test remaining.
Total time to complete Offline 
data collection: 		(   32) seconds.
Offline data collection
capabilities: 			 (0x1b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (   1) minutes.
SCT capabilities: 	       (0x0039)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  9 Power_On_Hours          -O--C-   100   100   000    -    99
 12 Power_Cycle_Count       -O--C-   100   100   000    -    43
167 Unknown_Attribute       -O---K   100   100   000    -    0
168 Unknown_Attribute       -O--C-   100   100   000    -    7
175 Program_Fail_Count_Chip PO--C-   100   100   010    -    0
192 Power-Off_Retract_Count -O--C-   100   100   000    -    37
194 Temperature_Celsius     PO---K   100   100   000    -    40 (Min/Max 30/60)
163 Unknown_Attribute       ------   100   100   001    -    65
164 Unknown_Attribute       ------   100   100   001    -    21
166 Unknown_Attribute       ------   100   100   010    -    0
241 Total_LBAs_Written      ------   100   100   000    -    71588629
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented for legacy controllers
Read GP Log Directory failed

SMART Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00           SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O     51  Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x09           SL  R/W      1  Selective self-test log
0x80-0x9f      SL  R/W     16  Host vendor specific log
0xe0           SL  R/W      1  SCT Command/Status
0xe1           SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log (GP Log 0x03) not supported

SMART Error Log Version: 1
No Errors Logged

SMART Extended Self-test Log (GP Log 0x07) not supported

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported

Read SCT Status failed: request failed, error code 0x05

Read SCT Status failed: request failed, error code 0x05
SCT (Get) Error Recovery Control command failed

Device Statistics (GP Log 0x04) not supported

ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented for legacy controllers
Read SATA Phy Event Counters failed

[jeremy385893]

smartctl -x output for SanDisk X300s device in attachment

[Alex Samorukov]

Could you please try to use "SSD toolkit" tool for one of this drives to get attributes description?

[jeremy385893]

I'm sorry but SSD toolkit is not available on my platform.

[jeremy385893]

Finally, in attachement, the output of SSD toolkit for x300s 128GB.

[Alex Samorukov]

Support for SanDisk added in r3984. Please update drivedb and let me know if it works.

P.S. which OS are you using? Possibly we can try to implement -l devstat support.

[Alex Samorukov]

Support for Apacer SSD also added

[jeremy385893]

I have just tested:

• For Apacer SSD => OK, it works
• For SanDisk => OK, it works