Add support for Transcend SSD TS256GSSD340

[Alexander Gruber]

The drive is not recognized with the latest drivedb.h. I am providing the current smartctl output:

# smartctl -x /dev/sda
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.11.10-21-desktop] (SUSE RPM)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

START OF INFORMATION SECTION

Device Model: TS256GSSD340
Serial Number: 20140513B4304788622A
LU WWN Device Id: 5 000000 000000000
Firmware Version: SVN423b
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 3.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Aug 20 13:56:04 2014 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

START OF READ SMART DATA SECTION

SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity

was never started.
Auto Offline Data Collection: Disabled.

Self-test execution status: ( 0) The previous self-test routine completed

without error or no self-test has ever
been run.

Total time to complete Offline
data collection: ( 32) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.

Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.

SMART capabilities: (0x0003) Saves SMART data before entering

power-saving mode.
Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

General Purpose Logging supported.

Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 1) minutes.
SCT capabilities: (0x0039) SCT Status supported.

SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE

1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--- 100 100 050 - 0
5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0
7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0
8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0
9 Power_On_Hours -O--C- 100 100 000 - 14

10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0
12 Power_Cycle_Count -O--C- 100 100 000 - 15

167 Unknown_Attribute -O---K 100 100 000 - 0
169 Unknown_Attribute PO--C- 100 100 010 - 3211264
170 Unknown_Attribute PO--C- 100 100 010 - 0
173 Unknown_Attribute -O--C- 199 199 000 - 4295163905
175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0
192 Power-Off_Retract_Count -O--C- 100 100 000 - 4
194 Temperature_Celsius -O---K 062 062 030 - 38 (Min/Max 37/50)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
233 Media_Wearout_Indicator -O--CK 100 100 000 - 41291776
234 Unknown_Attribute -O--CK 100 100 000 - 15104384
240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0
241 Total_LBAs_Written -O--CK 100 100 000 - 27956764
242 Total_LBAs_Read -O--CK 100 100 000 - 3035910

_ K auto-keep

| C event count

_ R error rate

| S speed/performance

_ O updated online

| P prefailure warning

General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1

SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS

1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing

Selective self-test flags (0x0):

After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
SCT Support Level: 0
Device State: Active (0)
Current Temperature: 0 Celsius
Power Cycle Max Temperature: 0 Celsius
Lifetime Max Temperature: 0 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: -127/127 Celsius
Min/Max Temperature Limit: -127/127 Celsius
Temperature History Size (Index): 478 (145)

Index Estimated Time Temperature Celsius

146 2014-08-20 05:59 ? -
... ..(331 skipped). .. -

0 2014-08-20 11:31 ? -
1 2014-08-20 11:32 48 *
2 2014-08-20 11:33 48 *
3 2014-08-20 11:34 48 *
4 2014-08-20 11:35 ? -
5 2014-08-20 11:36 ? -
6 2014-08-20 11:37 50 *
7 2014-08-20 11:38 49
8 2014-08-20 11:39 48 *

... ..( 26 skipped). .. *

35 2014-08-20 12:06 48 *
36 2014-08-20 12:07 49

... ..( 8 skipped). ..

45 2014-08-20 12:16 49
46 2014-08-20 12:17 50 *
47 2014-08-20 12:18 50 *
48 2014-08-20 12:19 50 *
49 2014-08-20 12:20 49
50 2014-08-20 12:21 50 *

... ..( 2 skipped). .. *

53 2014-08-20 12:24 50 *
54 2014-08-20 12:25 49
55 2014-08-20 12:26 50 *
56 2014-08-20 12:27 49
57 2014-08-20 12:28 49
58 2014-08-20 12:29 50 *
59 2014-08-20 12:30 50 *
60 2014-08-20 12:31 50 *
61 2014-08-20 12:32 49
62 2014-08-20 12:33 50 *
63 2014-08-20 12:34 43
64 2014-08-20 12:35 43
65 2014-08-20 12:36 40 *

... ..( 2 skipped). .. *

68 2014-08-20 12:39 40 *
69 2014-08-20 12:40 39
70 2014-08-20 12:41 38 *

... ..( 3 skipped). .. *

74 2014-08-20 12:45 38 *
75 2014-08-20 12:46 37

... ..( 4 skipped). ..

80 2014-08-20 12:51 37
81 2014-08-20 12:52 38 *
82 2014-08-20 12:53 37
83 2014-08-20 12:54 37
84 2014-08-20 12:55 38 *

... ..( 19 skipped). .. *
104 2014-08-20 13:15 38 *
105 2014-08-20 13:16 39
106 2014-08-20 13:17 39
107 2014-08-20 13:18 38 *
... ..( 22 skipped). .. *
130 2014-08-20 13:41 38 *
131 2014-08-20 13:42 37
132 2014-08-20 13:43 38 *
133 2014-08-20 13:44 38 *
134 2014-08-20 13:45 38 *
135 2014-08-20 13:46 37
136 2014-08-20 13:47 38 *
137 2014-08-20 13:48 37
138 2014-08-20 13:49 38 *
... ..( 6 skipped). .. *
145 2014-08-20 13:56 38 *

SCT Error Recovery Control:

Read: 70 (7.0 seconds)

Write: 70 (7.0 seconds)

Device Statistics (GP Log 0x04)
Page Offset Size Value Description

1 ===== = = == General Statistics (rev 2) ==
1 0x008 4 15 Lifetime Power-On Resets
1 0x018 6 27935652 Logical Sectors Written
1 0x020 6 73142 Number of Write Commands
1 0x028 6 3035910 Logical Sectors Read
1 0x030 6 81551 Number of Read Commands
1 0x038 6 50400000 Date and Time TimeStamp
7 ===== = = == Solid State Device Statistics (rev 1) ==
7 0x008 1 0~ Percentage Used Endurance Indicator

|_ ~ normalized value

SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 4 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 41 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC