id,summary,reporter,owner,description,type,status,priority,milestone,component,version,resolution,keywords,cc 334,Add support for Sandisk Extreme II SSD drives,sserdyuk,Christian Franke,"The drives are not recognized, and SMART attributes aren't presented correctly. I am providing the current smartctl output as well as Sandisk's proprietary utility output showing the meaning of the attributes: '''# smartctl -x /dev/sdc''' {{{ smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-63-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: SanDisk SDSSDXP480G Serial Number: 134322400436 LU WWN Device Id: 5 001b44 a51d228b4 Firmware Version: R1311 User Capacity: 480,103,981,056 bytes [480 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 6 Local Time is: Wed Jun 4 10:46:20 2014 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 4 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0 9 Power_On_Hours -O--CK 253 100 --- - 3582 12 Power_Cycle_Count -O--CK 100 100 --- - 12 166 Unknown_Attribute -O--CK 100 100 --- - 1 167 Unknown_Attribute -O--CK 100 100 --- - 41 168 Unknown_Attribute -O--CK 100 100 --- - 81 169 Unknown_Attribute -O--CK 100 100 --- - 756 171 Unknown_Attribute -O--CK 100 100 --- - 0 172 Unknown_Attribute -O--CK 100 100 --- - 0 173 Unknown_Attribute -O--CK 100 100 --- - 10 174 Unknown_Attribute -O--CK 100 100 --- - 2 187 Reported_Uncorrect -O--CK 100 100 --- - 0 194 Temperature_Celsius -O---K 067 038 --- - 33 (Min/Max 24/38) 212 Unknown_Attribute -O--CK 100 100 --- - 0 230 Head_Amplitude -O--CK 100 100 --- - 33 232 Available_Reservd_Space PO--CK 100 100 004 - 100 233 Media_Wearout_Indicator -O--CK 100 100 --- - 5385 241 Total_LBAs_Written ----CK 253 253 --- - 2433 242 Total_LBAs_Read ----CK 253 253 --- - 3335 243 Unknown_Attribute -O--CK 100 100 --- - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] GP/S Log at address 0x00 has 1 sectors [Log Directory] SMART Log at address 0x01 has 1 sectors [Summary SMART error log] SMART Log at address 0x02 has 2 sectors [Comprehensive SMART error log] GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] GP/S Log at address 0x04 has 8 sectors [Device Statistics] SMART Log at address 0x06 has 1 sectors [SMART self-test log] GP Log at address 0x07 has 1 sectors [Extended self-test log] GP Log at address 0x10 has 1 sectors [NCQ Command Error] GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] GP/S Log at address 0x30 has 9 sectors [Reserved] GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging Warning: device does not support SCT Commands SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 142 Device-to-host register FISes sent due to a COMRESET }}} '''From Sandisk utility:''' {{{ Sandisk Extreme II (firmware: R1311) 5 / 05 - Retired Block Count [1 block = 4 MB] 9 / 09 - Power On Hours 12 / 0C - Device Power Cycle Count 166 / A6 - Min W/E Cycle 167 / A7 - Min Bad Block/Die 168 / A8 - Maximum Erase Cycle 169 / A9 - Total Bad Block 171 / AB - Program Fail Count 172 / AC - Erase Fail Count 173 / AD - Average Erase Cycle 174 / AE - Unexpected Power Loss Count 187 / BB - Reported Uncorrectable Errors 194 / C2 - Current Temperature 212 / D4 - SATA PHY Error 230 / E6 - Percentage Total P/E Count XX.YY 232 / E8 - Spare Blocks Remaining [%] 233 / E9 - Total GB Written to NAND 241 / F1 - Total GB Written 242 / F2 - Total GB Read }}} ",enhancement,closed,major,Release 6.3,drivedb,6.2,fixed,,