Add Sandisk X210 MLC SSD reference in the drivedb

[jeremy385892]

I would like adding the following memory devices references in drivedb:

First device:
SATA DOM ATP 4GB SLC_AF4GSSEH-BABXP

=== START OF INFORMATION SECTION ===
Device Model: ATP IG SATA DOM
Serial Number: 99001140224112000101
Firmware Version: 20111212
User Capacity: 3,958,972,416 bytes [3.95 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Tue Apr 15 09:02:11 2014 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

Second device:
SSD SanDisk 256GB Sandisk X210 MLC (SD6SB2M-256G)
and
SSD SanDisk 128GB Sandisk X210 MLC (SD6SB2M-128G)

=== START OF INFORMATION SECTION ===
Device Model: SanDisk SD6SB2M256G1022I
Serial Number: 133639400660
LU WWN Device Id: 5 001b44 a291c68d4
Firmware Version: X210400
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Apr 15 09:02:08 2014 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

[Christian Franke]

Please provide smartctl -x sample outputs for each device as attachments to this ticket.

[Christian Franke]

Meantime, SanDisk X210 was added in r3974, r3975 (included in smartmontools 6.3) thanks to sample output provided on database mailing list.

For "ATP IG SATA DOM", please provide:

• sample smartctl -x output,
• Product info (CF Card?),
• SMART info from a vendor specific tool (if available).

[jeremy385893]

For SanDisk X210, device is not known of smartmontools. This is the ouput:
smartctl -x /dev/ad1
smartctl 6.3 2014-07-26 r3976 [NS-BSD 1.1.3- amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

START OF INFORMATION SECTION

Device Model: SanDisk SD6SB2M128G
Serial Number: 140754400052
LU WWN Device Id: 5 001b44 bd132af34
Firmware Version: X210400
User Capacity: 128,035,676,160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: Unknown (0x0011)
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Aug 21 13:13:52 2014 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable

START OF READ SMART DATA SECTION

SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity

was never started.
Auto Offline Data Collection: Disabled.

Self-test execution status: ( 0) The previous self-test routine completed

without error or no self-test has ever
been run.

Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x11) SMART execute Offline immediate.

No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.

SMART capabilities: (0x0003) Saves SMART data before entering

power-saving mode.
Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

General Purpose Logging supported.

Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.

SMART Attributes Data Structure revision number: 4
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE

5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0
9 Power_On_Hours -O--CK 060 100 --- - 60

12 Power_Cycle_Count -O--CK 100 100 --- - 38

166 Unknown_Attribute -O--CK 100 100 --- - 0
167 Unknown_Attribute -O--CK 100 100 --- - 18
168 Unknown_Attribute -O--CK 100 100 --- - 3
169 Unknown_Attribute -O--CK 100 100 --- - 187
171 Unknown_Attribute -O--CK 100 100 --- - 0
172 Unknown_Attribute -O--CK 100 100 --- - 0
173 Unknown_Attribute -O--CK 100 100 --- - 0
174 Unknown_Attribute -O--CK 100 100 --- - 29
187 Reported_Uncorrect -O--CK 100 100 --- - 0
194 Temperature_Celsius -O---K 064 037 --- - 36 (Min/Max 29/37)
212 Unknown_Attribute -O--CK 100 100 --- - 0
230 Unknown_SSD_Attribute -O--CK 100 100 --- - 0
232 Available_Reservd_Space PO--CK 100 100 004 - 100
233 Media_Wearout_Indicator -O--CK 100 100 --- - 0
241 Total_LBAs_Written ----CK 253 253 --- - 39
242 Total_LBAs_Read ----CK 253 253 --- - 32675
243 Unknown_Attribute -O--CK 100 100 --- - 0

_ K auto-keep

| C event count

_ R error rate

| S speed/performance

_ O updated online

| P prefailure warning

ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented for legacy controllers
Read GP Log Directory failed

SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x04 SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x30 SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f SL R/W 16 Host vendor specific log

SMART Extended Comprehensive Error Log (GP Log 0x03) not supported

SMART Error Log Version: 1
No Errors Logged

SMART Extended Self-test Log (GP Log 0x07) not supported

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported

SCT Commands not supported

Device Statistics (GP Log 0x04) not supported

ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented for legacy controllers
Read SATA Phy Event Counters failed

[jeremy385893]

Finally, SATA DOM ATP 4GB SLC_AF4GSSEH-BABXP is not required (hardware modification), so it is not necessary to add it in drivedb.

[Alex Samorukov]

SanDisk X210 support fixed in r3988, please test if it works for you.

[Alex Samorukov]

No feedback within 3 weeks, changing status to fixed