Opened 7 years ago

Closed 7 years ago

#304 closed enhancement (fixed)

Add a memory device reference in drivedb

Reported by: jeremy385892 Owned by: Christian Franke
Priority: minor Milestone: Release 6.3
Component: drivedb Version: 6.2
Keywords: Cc:

Description

I would like adding the following memory device reference in drivedb:

START OF INFORMATION SECTION

Device Model: 2GB SATA Flash Drive
Serial Number: C0112011122100000073
Firmware Version: SFDDA01C
User Capacity: 2,011,226,112 bytes [2.01 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
<b>Device is: Not in smartctl database [for details use: -P showall]</b>
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Fri Oct 25 15:13:02 2013 GMT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

START OF READ SMART DATA SECTION

SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity

was never started.
Auto Offline Data Collection: Disabled.

Total time to complete Offline
data collection: ( 30) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not
supported.
SMART capabilities: (0x0003) Saves SMART data before entering

power-saving mode.
Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

No General Purpose Logging support.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE

1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always -

16777215

2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline -

0

3 Spin_Up_Time 0x0007 100 100 050 Pre-fail Always -

0

5 Reallocated_Sector_Ct 0x0013 100 100 050 Pre-fail Always -

0

7 Unknown_SSD_Attribute 0x000b 100 100 050 Pre-fail Always -

0

8 Unknown_SSD_Attribute 0x0005 100 100 050 Pre-fail Offline -

0

9 Power_On_Hours 0x0012 100 100 000 Old_age Always -

24

10 Unknown_SSD_Attribute 0x0013 100 100 050 Pre-fail Always -

0

12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always -

18

168 Unknown_Attribute 0x0012 100 100 000 Old_age Always -

0

175 Program_Fail_Count_Chip 0x0003 100 100 010 Pre-fail Always -

0

192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always -

0

194 Temperature_Celsius 0x0022 040 100 000 Old_age Always -

40 (Min/Max? 30/60)

197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always -

0

240 Unknown_SSD_Attribute 0x0013 100 100 050 Pre-fail Always -

0

160 Unknown_Attribute 0x0000 100 100 010 Old_age Offline -

6

161 Unknown_Attribute 0x0000 100 100 010 Old_age Offline -

6

162 Unknown_Attribute 0x0000 100 100 005 Old_age Offline -

252

163 Unknown_Attribute 0x0000 100 100 001 Old_age Offline -

35

164 Unknown_Attribute 0x0000 100 100 001 Old_age Offline -

10

165 Unknown_Attribute 0x0000 100 100 001 Old_age Offline -

10

241 Total_LBAs_Written 0x0000 100 100 000 Old_age Offline -

4777601

SMART Error Log Version: 0
No Errors Logged

SMART Self-test log structure revision number 0
Warning: ATA Specification requires self-test log structure revision number = 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported

Change History (3)

comment:1 Changed 7 years ago by jeremy385892

The memory device is APSDM002G15AN-CT/SFDDA01C of Apacer.

comment:2 Changed 7 years ago by Christian Franke

Milestone: Release 6.3
Owner: changed from somebody to Christian Franke
Priority: majorminor
Status: newaccepted
Type: defectenhancement

comment:3 Changed 7 years ago by Christian Franke

Resolution: fixed
Status: acceptedclosed
Note: See TracTickets for help on using tickets.