Opened 7 years ago

Closed 6 years ago

#297 closed enhancement (fixed)

Device data for Plextor M5S 128G SSD

Reported by: dword1511 Owned by: Christian Franke
Priority: minor Milestone: Release 6.3
Component: drivedb Version: 6.2
Keywords: Cc:

Description

Sorry I am supposed to post this to the mailing list according to the wiki, but I really do not want to subscribe the list.

The device seems to have power-on hours in unit of 10-hours or so (I have used this for days without stop and it only shows 24), and it is said Total_LBAs_Written/Read is in 64MB, but no one knows for sure...

smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.8.0-30-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

START OF INFORMATION SECTION

Device Model: PLEXTOR PX-128M5S
Firmware Version: 1.04
User Capacity: 128,035,676,160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Sep 25 21:23:47 2013 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

START OF READ SMART DATA SECTION

SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity

was never started.
Auto Offline Data Collection: Disabled.

Self-test execution status: ( 0) The previous self-test routine completed

without error or no self-test has ever
been run.

Total time to complete Offline
data collection: ( 10) seconds.
Offline data collection
capabilities: (0x15) SMART execute Offline immediate.

No Auto Offline data collection support.
Abort Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.

SMART capabilities: (0x0002) Does not save SMART data before

entering power-saving mode.
Supports SMART auto save timer.

Error logging capability: (0x00) Error logging supported.

General Purpose Logging supported.

Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SCT capabilities: (0x003d) SCT Status supported.

SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE

1 Raw_Read_Error_Rate PO---- 100 100 070 - 0
5 Reallocated_Sector_Ct PO---- 100 100 000 - 0
9 Power_On_Hours -O---- 100 100 000 - 24

12 Power_Cycle_Count -O---- 100 100 000 - 6

177 Wear_Leveling_Count PO---- 100 100 000 - 1801
178 Used_Rsvd_Blk_Cnt_Chip PO---- 100 100 000 - 0
181 Program_Fail_Cnt_Total PO---- 100 100 000 - 0
182 Erase_Fail_Count_Total PO---- 100 100 000 - 0
187 Reported_Uncorrect -O---- 100 100 000 - 0
192 Power-Off_Retract_Count PO---- 100 100 000 - 4
196 Reallocated_Event_Count PO---- 100 100 000 - 0
198 Offline_Uncorrectable PO---- 100 100 000 - 0
199 UDMA_CRC_Error_Count PO---- 100 100 000 - 0
232 Available_Reservd_Space PO---- 100 100 010 - 0
241 Total_LBAs_Written PO---- 100 100 000 - 5237
242 Total_LBAs_Read PO---- 100 100 000 - 2045

_ K auto-keep
| C event count
_ R error rate
| S speed/performance
_ O updated online

| P prefailure warning

General Purpose Log Directory Version 0
SMART Log Directory Version 0
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters
0x80-0x9f GPL,SL R/W 1 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status?
0xe1 GPL,SL R/W 1 SCT Data Transfer

SMART Extended Comprehensive Error Log (GP Log 0x03) not supported

SMART Error Log Version: 0
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime?(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 0 -
# 2 Short offline Completed without error 00% 0 -

Selective Self-tests/Logging not supported

SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: ? Celsius
Power Cycle Min/Max? Temperature: ?/ ? Celsius
Lifetime Min/Max? Temperature: ?/ ? Celsius
Under/Over? Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 0 minutes
Temperature Logging Interval: 0 minutes
Min/Max? recommended Temperature: ?/ ? Celsius
Min/Max? Temperature Limit: ?/ ? Celsius
Temperature History Size (Index): 128 (0)

Index Estimated Time Temperature Celsius

1 2013-09-25 19:16 ? -

... ..(126 skipped). .. -

0 2013-09-25 21:23 ? -

SCT Error Recovery Control:

Read: 2 (0.2 seconds)

Write: 2 (0.2 seconds)

Device Statistics (GP Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy? to drive PhyNRdy
0x000a 2 35 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

Attachments (1)

plextorm5s128.log (6.7 KB) - added by dword1511 7 years ago.
Output of smartctl -q noserial -x

Download all attachments as: .zip

Change History (4)

comment:1 Changed 7 years ago by Christian Franke

Component: alldrivedb
Milestone: Release 6.3
Owner: changed from somebody to Christian Franke
Priority: majorminor
Status: newaccepted

Please post smartctl output again, but as attachment.

Changed 7 years ago by dword1511

Attachment: plextorm5s128.log added

Output of smartctl -q noserial -x

comment:2 Changed 7 years ago by dword1511

Sorry for messing up. Now after some vm.drop_caches and dd I can determine the "242 Total_LBAs_Read" attribute has a unit of 32MiB. Write should be the same. As for the power on hours, it might be either a special design or a firmware bug similar to the one found on M5 Pro: http://www.plextoramericas.com/index.php/forum/27-ssd/8180-px-256m5p-firmware-105-bug

comment:3 Changed 6 years ago by Christian Franke

Resolution: fixed
Status: acceptedclosed
Note: See TracTickets for help on using tickets.