Unknown USB bridge [0x3538:0x0902 (0x000)] works with -d sat

[antonone]

Hello,

A USB disk (PQI H560) using bridge 0x3538:0902 doesn't get auto-detected without '-d sat' option. With '-d sat' everything works OK. Tested on Fedora 15.

Relevant log below:

---

# smartctl -a /dev/sdg
smartctl 5.42 2011-10-20 r3458 [x86_64-linux-2.6.43.8-1.fc15.x86_64] (local build)
Copyright (C) 2002-11 by Bruce Allen, ​http://smartmontools.sourceforge.net

/dev/sdg: Unknown USB bridge [0x3538:0x0902 (0x000)]
Smartctl: please specify device type with the -d option.

Use smartctl -h to get a usage summary

---

# smartctl -a /dev/sdg -d sat
smartctl 5.42 2011-10-20 r3458 [x86_64-linux-2.6.43.8-1.fc15.x86_64] (local build)
Copyright (C) 2002-11 by Bruce Allen, ​http://smartmontools.sourceforge.net

START OF INFORMATION SECTION
Model Family: Western Digital Scorpio Blue Serial ATA
Device Model: WDC WD5000BEVT-00A0RT0
Serial Number: WD-WX80AC9D2463
LU WWN Device Id: 5 0014ee 0ac99e661
Firmware Version: 01.01A01
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Jul 31 07:25:04 2012 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
[removed rest of a valid output - I can provide it if it'll be needed]

[Christian Franke]

r3588.