Opened 5 months ago
Closed 4 months ago
#1852 closed enhancement (duplicate)
WD Red SA500 NAS SSD (WDC WDS100T1R0A) bogus Media_Wearout_Indicator
Reported by: | Volker | Owned by: | |
---|---|---|---|
Priority: | minor | Milestone: | |
Component: | drivedb | Version: | |
Keywords: | ssd | Cc: |
Description
A new WD WD Red™ SA500 NAS SATA SSD 2,5” is shown in Proxmox with a wearout of 99
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.8.8-2-pve] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: WD Blue / Red / Green SSDs Device Model: WDC WDS100T1R0A-68A4W0 Serial Number: 241337801366 LU WWN Device Id: 5 001b44 8c4a7da4b Firmware Version: 411010WR User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5319 ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Jul 15 10:21:57 2024 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 4 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct -O--CK 100 100 --- - 0 9 Power_On_Hours -O--CK 100 100 --- - 163 12 Power_Cycle_Count -O--CK 100 100 --- - 3 165 Block_Erase_Count -O--CK 100 100 --- - 1900561 166 Minimum_PE_Cycles_TLC -O--CK 100 100 --- - 0 167 Max_Bad_Blocks_per_Die -O--CK 100 100 --- - 50 168 Maximum_PE_Cycles_TLC -O--CK 100 100 --- - 1 169 Total_Bad_Blocks -O--CK 100 100 --- - 281 170 Grown_Bad_Blocks -O--CK 100 100 --- - 0 171 Program_Fail_Count -O--CK 100 100 --- - 0 172 Erase_Fail_Count -O--CK 100 100 --- - 0 173 Average_PE_Cycles_TLC -O--CK 100 100 --- - 0 174 Unexpected_Power_Loss -O--CK 100 100 --- - 0 184 End-to-End_Error -O--CK 100 100 --- - 0 187 Reported_Uncorrect -O--CK 100 100 --- - 0 188 Command_Timeout -O--CK 100 100 --- - 0 194 Temperature_Celsius -O---K 066 043 --- - 34 (Min/Max 25/43) 199 UDMA_CRC_Error_Count -O--CK 100 100 --- - 0 230 Media_Wearout_Indicator -O--CK 001 001 --- - 0x000200000002 232 Available_Reservd_Space PO--CK 100 100 004 - 100 233 NAND_GB_Written_TLC -O--CK 100 100 --- - 249 234 NAND_GB_Written_SLC -O--CK 100 100 --- - 273 241 Host_Writes_GiB ----CK 253 253 --- - 269 242 Host_Reads_GiB ----CK 253 253 --- - 132 244 Temp_Throttle_Status -O--CK 000 100 --- - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 1957 Current Device Internal Status Data log 0x25 GPL R/O 1957 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xde GPL VS 8 Device vendor specific log SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 163 - Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 3 --- Lifetime Power-On Resets 0x01 0x010 4 163 --- Power-on Hours 0x01 0x018 6 565216007 --- Logical Sectors Written 0x01 0x020 6 3687887 --- Number of Write Commands 0x01 0x028 6 277134562 --- Logical Sectors Read 0x01 0x030 6 1352001 --- Number of Read Commands 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 3 Device-to-host register FISes sent due to a COMRESET
I hope I did everything right :-)
Change History (4)
comment:1 by , 4 months ago
Keywords: | ata added |
---|---|
Milestone: | → undecided |
comment:2 by , 4 months ago
Related Proxmox report: https://bugzilla.proxmox.com/show_bug.cgi?id=5603
comment:3 by , 4 months ago
Component: | all → drivedb |
---|---|
Keywords: | ssd added; ata removed |
Summary: | WD Red™ SA500 NAS SATA SSD 2,5” → WD Red SA500 NAS SSD (WDC WDS100T1R0A) bogus Media_Wearout_Indicator |
Type: | defect → enhancement |
comment:4 by , 4 months ago
Milestone: | undecided |
---|---|
Resolution: | → duplicate |
Status: | new → closed |
See ticket #1620.
Note:
See TracTickets
for help on using tickets.
I don't see any wearout of 99 in the smartctl output. Please ask Proxmox support which value is used by Proxmox to provide this information.