Unknown USB bridge [0x04e8:0x61fb (0x100)]

[skoehler]

This is a Samsung T7 Shield, 4TB.

It has a USB to NVMe bridge. I don't know which one.

[Christian Franke]

Another Samsung T7 device reportedly uses an ASMedia ASM2362 bridge, see ticket #1403.

Please test -d sntasmedia option with smartmontools 7.3 or a recent CI build (​https://builds.smartmontools.org/).

[Nate]

I get the following when I try that on my Samsung T7 Shield, 2TB and 4TB.

smartctl 7.3 2022-02-28 r5338 [Darwin 22.5.0 arm64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/disk5: Type 'sntasmedia': Not a device of type 'scsi'

This Anandtech article seems to indicate the use of ASMedia ASM2362 in their 4TB review unit.
​https://www.anandtech.com/show/18734/samsung-portable-ssd-t7-shield-4tb-review-ip65-pssd-gets-a-capacity-upgrade

[skoehler]

I get the following:

# smartctl -d sntasmedia -a /dev/sda
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.3.1-arch1-1] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       Samsung Portable SSD T7 Shield
Serial Number:                      xxxxxxx
Firmware Version:                   FXI72P2Q
PCI Vendor/Subsystem ID:            0x144d
IEEE OUI Identifier:                0x002538
Total NVM Capacity:                 4.000.787.030.016 [4,00 TB]
Unallocated NVM Capacity:           0
Controller ID:                      5
NVMe Version:                       1.4
Number of Namespaces:               1
Namespace 1 Size/Capacity:          4.000.787.030.016 [4,00 TB]
Namespace 1 Utilization:            1.280.495.448.064 [1,28 TB]
Namespace 1 Formatted LBA Size:     512
Local Time is:                      Sat Jun 17 00:56:37 2023 CEST
Firmware Updates (0x16):            3 Slots, no Reset required
Optional Admin Commands (0x0007):   Security Format Frmw_DL
Optional NVM Commands (0x001d):     Comp DS_Mngmt Wr_Zero Sav/Sel_Feat
Log Page Attributes (0x0f):         S/H_per_NS Cmd_Eff_Lg Ext_Get_Lg Telmtry_Lg
Maximum Data Transfer Size:         512 Pages
Warning  Comp. Temp. Threshold:     75 Celsius
Critical Comp. Temp. Threshold:     80 Celsius
Namespace 1 Features (0x10):        NP_Fields

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +     4.83W       -        -    0  0  0  0        0       0
 1 +     3.54W       -        -    1  1  1  1        0       0
 2 +     3.04W       -        -    2  2  2  2        0     500
 3 -   0.0500W       -        -    3  3  3  3      210    1200

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
 0 +     512       0         0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning:                   0x00
Temperature:                        33 Celsius
Available Spare:                    100%
Available Spare Threshold:          10%
Percentage Used:                    0%
Data Units Read:                    19.723.816 [10,0 TB]
Data Units Written:                 3.002.366 [1,53 TB]
Host Read Commands:                 77.899.573
Host Write Commands:                12.341.533
Controller Busy Time:               152
Power Cycles:                       1
Power On Hours:                     1.036
Unsafe Shutdowns:                   0
Media and Data Integrity Errors:    0
Error Information Log Entries:      0
Warning  Comp. Temperature Time:    0
Critical Comp. Temperature Time:    0
Temperature Sensor 1:               33 Celsius
Temperature Sensor 2:               33 Celsius

Warning: NVMe Get Log truncated to 0x200 bytes, 0x200 bytes zero filled
Error Information (NVMe Log 0x01, 16 of 64 entries)
No Errors Logged

[Nate]

Perhaps this is an issue with the the SAT SMART Driver and not smartmontools?
I'm using the one provided by Binary Fruit who makes DriveDx.
​https://binaryfruit.com/blog/we-released-sat-smart-driver-for-apple-silicon-macs

[skoehler]

You are using what? I'm using the standard smartmontools package (smartmontools 7.3-1) and the standard kernel (linux 6.3.1.arch1-1) on Arch Linux.

[Christian Franke]

See ticket #1733 (2TB version).

[Christian Franke]

r5523, r5524.