id,summary,reporter,owner,description,type,status,priority,milestone,component,version,resolution,keywords,cc 1577,add to drivedb: HPE VK000480GWSRR,cdevers-es,,"I would appreciate it if the smartmontools database supported the `HPE VK000480GWSRR` drive, please: {{{ # dpkg -s smartmontools Package: smartmontools Status: install ok installed Priority: optional Section: utils Installed-Size: 1776 Maintainer: Ubuntu Developers Architecture: amd64 Version: 6.5+svn4324-1ubuntu0.1 Depends: debianutils (>= 2.2), lsb-base (>= 3.2-14), libc6 (>= 2.27), libcap-ng0, libgcc1 (>= 1:3.0), libselinux1 (>= 1.32), libstdc++6 (>= 5.2) Recommends: mailx | mailutils Suggests: gsmartcontrol, smart-notifier, curl | wget | lynx, gpg Conflicts: smartsuite, ucsc-smartsuite Conffiles: /etc/default/smartmontools 65d8b4ed9f0bcd1c800d204ac8ef2008 /etc/init.d/smartmontools e1ff37fab620203e75462c589f5ae150 /etc/smartd.conf 8f8bc44bdcfca6196919c4afdf4e9e7c /etc/smartmontools/run.d/10mail 07e70aa86dcab3b2c7205254e3e942e2 /etc/smartmontools/run.d/10powersave-notify 5d52539f1a9c97f30959f6436d2f84e0 Description: control and monitor storage systems using S.M.A.R.T. The smartmontools package contains two utility programs (smartctl and smartd) to control and monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI hard disks. It is derived from the smartsuite package, and includes support for ATA/ATAPI-5 disks. It should run on any modern Linux system. Homepage: http://smartmontools.sourceforge.net/ Original-Maintainer: Giuseppe Iuculano # update-smart-drivedb -v […] }}} {{{ # smartctl -q noserial -i /dev/sdc smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.4.0-97-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: VK000480GWSRR Firmware Version: HPG3 User Capacity: 480,103,981,056 bytes [480 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: Unknown(0x0ffc), ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Mar 17 23:15:56 2022 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled }}} In particular, I’d appreciate it if `smartctl` could run self-tests on this drive model, then read back to verify the test log history to make sure that the drive has been passing tests. Thanks!",enhancement,new,minor,unscheduled,drivedb,,,ssd,cdevers-es