add to drivedb: HPE VK000480GWSRR

[cdevers-es]

I would appreciate it if the smartmontools database supported the HPE VK000480GWSRR drive, please:

# dpkg -s smartmontools
Package: smartmontools
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 1776
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 6.5+svn4324-1ubuntu0.1
Depends: debianutils (>= 2.2), lsb-base (>= 3.2-14), libc6 (>= 2.27), libcap-ng0, libgcc1 (>= 1:3.0), libselinux1 (>= 1.32), libstdc++6 (>= 5.2)
Recommends: mailx | mailutils
Suggests: gsmartcontrol, smart-notifier, curl | wget | lynx, gpg
Conflicts: smartsuite, ucsc-smartsuite
Conffiles:
 /etc/default/smartmontools 65d8b4ed9f0bcd1c800d204ac8ef2008
 /etc/init.d/smartmontools e1ff37fab620203e75462c589f5ae150
 /etc/smartd.conf 8f8bc44bdcfca6196919c4afdf4e9e7c
 /etc/smartmontools/run.d/10mail 07e70aa86dcab3b2c7205254e3e942e2
 /etc/smartmontools/run.d/10powersave-notify 5d52539f1a9c97f30959f6436d2f84e0
Description: control and monitor storage systems using S.M.A.R.T.
 The smartmontools package contains two utility programs (smartctl and smartd)
 to control and monitor storage systems using the Self-Monitoring, Analysis and
 Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI
 hard disks. It is derived from the smartsuite package, and includes support
 for ATA/ATAPI-5 disks. It should run on any modern Linux system.
Homepage: http://smartmontools.sourceforge.net/
Original-Maintainer: Giuseppe Iuculano <iuculano@debian.org>
# update-smart-drivedb -v
[…]

# smartctl -q noserial -i /dev/sdc
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.4.0-97-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     VK000480GWSRR
Firmware Version: HPG3
User Capacity:    480,103,981,056 bytes [480 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   Unknown(0x0ffc), ACS-3 T13/2161-D revision 5
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Mar 17 23:15:56 2022 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

In particular, I’d appreciate it if smartctl could run self-tests on this drive model, then read back to verify the test log history to make sure that the drive has been passing tests.

Thanks!

[cdevers-es]

Report created as per https://www.smartmontools.org/wiki/FAQ#MyATASATAdriveisnotinthesmartctlsmartddatabase