HP P500 portable SSD not being correctly handled

[durval]

This is a "portable external" SSD (meaning, connected via USB.

With no -d XXX or with -d auto, smartctl -a shows:

/dev/da17: Unknown USB bridge [0x090c:0x1000 (0x1100)]

Experimenting with the various -d options, only -d scsi results in something:

========================================================[

smartctl 7.1 2019-12-30 r5022 [FreeBSD 11.2-STABLE amd64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               HP
Product:              HP P500
Revision:             1100
Compliance:           SPC-4
User Capacity:        124,471,177,728 bytes [124 GB]
Logical block size:   512 bytes
scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0
Logical Unit id:      0xXXXXXXXXXXXXXXXX
Device type:          disk
scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0
Local Time is:        Thu May 13 07:38:37 2021 -03
SMART support is:     Available - device has SMART capability.
SMART support is:     Disabled
Temperature Warning:  Disabled or Not Supported

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature:     0 C
Drive Trip Temperature:        0 C

Error Counter logging not supported

scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0

========================================================]
smartctl -d scsi -x results are the same.

Please let me know if you need anything else.