id,summary,reporter,owner,description,type,status,priority,milestone,component,version,resolution,keywords,cc 1479,Add support for Realtek RTL9210B USB to SATA bridge,David,,"I just bought a Sabrent USB adapter containing the RTL9210B which supports both NVME and SATA M.2 disks. I have a SATA disk installed but I can´t read any smart data. Would it be possible to add support for this chipset? I saw another ticket, 1315, asking for added support, but then for the chipset without B, which seems only NVME. I now get (when using smartctl -d scsi -a /dev/sdb): {{{ smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.11.16-1-default] (SUSE RPM) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: Sabrent Product: Revision: 1.00 Compliance: SPC-4 User Capacity: 1.000.204.886.016 bytes [1,00 TB] Logical block size: 512 bytes Physical block size: 4096 bytes LB provisioning type: not reported [LBPME=1, LBPRZ=0] Rotation Rate: Solid State Device Logical Unit id: 0x3001237923792379 Serial number: 0000000000000000 Device type: disk Local Time is: Wed Apr 28 17:46:12 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Disabled or Not Supported === START OF READ SMART DATA SECTION === SMART Health Status: OK Current Drive Temperature: 0 C Drive Trip Temperature: 0 C Error Counter logging not supported Device does not support Self Test logging }}} If I execute: smartctl -d test -a /dev/sdb I get: {{{ /dev/sdb [USB NVMe Realtek]: Device of type 'sntrealtek' [NVMe] detected /dev/sdb [USB NVMe Realtek]: Device of type 'sntrealtek' [NVMe] opened }}} Thanks in advance. ",enhancement,closed,minor,,all,7.2,worksforme,realtek nvme ata,