id summary reporter owner description type status priority milestone component version resolution keywords cc 1476 WD80EFAX-68LHPN0 drive permanently shows ATA Error TuxoHolic "This disk suddenly got a permanent error entry: 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 1 SMART Error Log Version: 1 ATA Error Count: 1 Error 1 occurred at disk power-on lifetime: 1051 hours (43 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 41 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 d0 b6 27 40 80 00:17:24.781 READ FPDMA QUEUED 60 00 00 d0 b5 27 40 80 00:16:42.916 READ FPDMA QUEUED 60 00 00 d0 b4 27 40 80 00:16:42.915 READ FPDMA QUEUED 60 00 00 d0 b3 27 40 80 00:16:42.914 READ FPDMA QUEUED 60 00 00 d0 b2 27 40 80 00:16:42.912 READ FPDMA QUEUED It looks like a single data transmission (CRC) error bewtween disk and SATA controller. Is it correct to assume that this does not really influence the probability of future errors? Unfortunately running smartctl -ad sat /dev/sdb returns error status 0x4000 wich I could not find in the documentation. Could you please give a hint to documentation of high valued exist status. Many thanks!" task closed minor smartctl invalid ata