id,summary,reporter,owner,description,type,status,priority,milestone,component,version,resolution,keywords,cc 1416,Drive not in Database - WDC WD140EDFZ,bassclef,,"White label drive in external USB case. {{{ smartctl 7.1 2019-12-30 r5022 [Darwin 19.6.0 x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD140EDFZ-11A0VA0 Firmware Version: 81.00A81 User Capacity: 14,000,519,643,136 bytes [14.0 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Dec 18 18:38:35 2020 GMT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 101) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: (1339) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 001 - 0 2 Throughput_Performance --S--- 100 100 054 - 0 3 Spin_Up_Time POS--- 086 086 001 - 238 (Average 340) 4 Start_Stop_Count -O--C- 100 100 000 - 10 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 7 Seek_Error_Rate -O-R-- 100 100 001 - 0 8 Seek_Time_Performance --S--- 100 100 020 - 0 9 Power_On_Hours -O--C- 100 100 000 - 0 10 Spin_Retry_Count -O--C- 100 100 001 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 10 22 Unknown_Attribute PO---K 100 100 025 - 100 192 Power-Off_Retract_Count -O--CK 100 100 000 - 10 193 Load_Cycle_Count -O--C- 100 100 000 - 10 194 Temperature_Celsius -O---- 039 039 000 - 40 (Min/Max 22/40) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented Read GP Log Directory failed SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x04 SL R/O 255 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x09 SL R/W 1 Selective self-test log 0x30 SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f SL R/W 16 Host vendor specific log 0xe0 SL R/W 1 SCT Command/Status 0xe1 SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 No Errors Logged SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 40 Celsius Power Cycle Min/Max Temperature: 36/40 Celsius Lifetime Min/Max Temperature: 22/40 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) Minimum supported ERC Time Limit: 65 (6.5 seconds) SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/65 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (53) Index Estimated Time Temperature Celsius 54 2020-12-18 16:31 0 - ... ..( 72 skipped). .. - 127 2020-12-18 17:44 0 - 0 2020-12-18 17:45 24 ***** 1 2020-12-18 17:46 25 ****** 2 2020-12-18 17:47 22 *** 3 2020-12-18 17:48 24 ***** 4 2020-12-18 17:49 24 ***** 5 2020-12-18 17:50 25 ****** 6 2020-12-18 17:51 25 ****** 7 2020-12-18 17:52 26 ******* 8 2020-12-18 17:53 27 ******** 9 2020-12-18 17:54 27 ******** 10 2020-12-18 17:55 28 ********* 11 2020-12-18 17:56 28 ********* 12 2020-12-18 17:57 29 ********** 13 2020-12-18 17:58 30 *********** 14 2020-12-18 17:59 30 *********** 15 2020-12-18 18:00 31 ************ 16 2020-12-18 18:01 31 ************ 17 2020-12-18 18:02 32 ************* 18 2020-12-18 18:03 32 ************* 19 2020-12-18 18:04 32 ************* 20 2020-12-18 18:05 33 ************** 21 2020-12-18 18:06 33 ************** 22 2020-12-18 18:07 34 *************** ... ..( 2 skipped). .. *************** 25 2020-12-18 18:10 34 *************** 26 2020-12-18 18:11 35 **************** 27 2020-12-18 18:12 35 **************** 28 2020-12-18 18:13 36 ***************** 29 2020-12-18 18:14 34 *************** 30 2020-12-18 18:15 35 **************** 31 2020-12-18 18:16 35 **************** 32 2020-12-18 18:17 35 **************** 33 2020-12-18 18:18 36 ***************** ... ..( 4 skipped). .. ***************** 38 2020-12-18 18:23 36 ***************** 39 2020-12-18 18:24 37 ****************** 40 2020-12-18 18:25 37 ****************** 41 2020-12-18 18:26 37 ****************** 42 2020-12-18 18:27 38 ******************* ... ..( 3 skipped). .. ******************* 46 2020-12-18 18:31 38 ******************* 47 2020-12-18 18:32 39 ******************** ... ..( 2 skipped). .. ******************** 50 2020-12-18 18:35 39 ******************** 51 2020-12-18 18:36 40 ********************* 52 2020-12-18 18:37 40 ********************* 53 2020-12-18 18:38 0 - SMART WRITE LOG does not return COUNT and LBA_LOW register SCT (Get) Error Recovery Control command failed Device Statistics (SMART Log 0x04) Page Offset Size Value Flags Description ATA_SMART_READ_LOG failed: Undefined error: 0 Read Device Statistics pages 0x00-0x06 failed Pending Defects log (GP Log 0x0c) not supported ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented Read SATA Phy Event Counters failed }}} ",enhancement,closed,minor,Release 7.4,drivedb,7.1,duplicate,hdd,