1 | | Replying to [ticket:1385 Andreas John]: |
2 | | > It comes from a Apple IMac 2012. |
3 | | > |
4 | | > # cat /tmp/smartctl-APPLE-HDD_WDC_WD10EALX-408EA0 :( |
5 | | > smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-1-grml-amd64] (local build) |
6 | | > Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org |
7 | | > |
8 | | > === START OF INFORMATION SECTION === |
9 | | > Device Model: APPLE HDD WDC WD10EALX-408EA0 |
10 | | > Firmware Version: 07.01D03 |
11 | | > User Capacity: 1,000,204,886,016 bytes [1.00 TB] |
12 | | > Sector Size: 512 bytes logical/physical |
13 | | > Rotation Rate: 7200 rpm |
14 | | > Device is: Not in smartctl database [for details use: -P showall] |
15 | | > ATA Version is: ATA8-ACS (minor revision not indicated) |
16 | | > SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) |
17 | | > Local Time is: Fri Oct 23 11:56:34 2020 UTC |
18 | | > SMART support is: Available - device has SMART capability. |
19 | | > SMART support is: Enabled |
20 | | > AAM feature is: Unavailable |
21 | | > APM feature is: Unavailable |
22 | | > Rd look-ahead is: Enabled |
23 | | > Write cache is: Enabled |
24 | | > DSN feature is: Unavailable |
25 | | > ATA Security is: Disabled, NOT FROZEN [SEC1] |
26 | | > Wt Cache Reorder: Enabled |
27 | | > |
28 | | > === START OF READ SMART DATA SECTION === |
29 | | > SMART overall-health self-assessment test result: PASSED |
30 | | > |
31 | | > General SMART Values: |
32 | | > Offline data collection status: (0x82) Offline data collection activity |
33 | | > was completed without error. |
34 | | > Auto Offline Data Collection: Enabled. |
35 | | > Self-test execution status: ( 0) The previous self-test routine completed |
36 | | > without error or no self-test has ever |
37 | | > been run. |
38 | | > Total time to complete Offline |
39 | | > data collection: (16080) seconds. |
40 | | > Offline data collection |
41 | | > capabilities: (0x7b) SMART execute Offline immediate. |
42 | | > Auto Offline data collection on/off support. |
43 | | > Suspend Offline collection upon new |
44 | | > command. |
45 | | > Offline surface scan supported. |
46 | | > Self-test supported. |
47 | | > Conveyance Self-test supported. |
48 | | > Selective Self-test supported. |
49 | | > SMART capabilities: (0x0003) Saves SMART data before entering |
50 | | > power-saving mode. |
51 | | > Supports SMART auto save timer. |
52 | | > Error logging capability: (0x01) Error logging supported. |
53 | | > General Purpose Logging supported. |
54 | | > Short self-test routine |
55 | | > recommended polling time: ( 2) minutes. |
56 | | > Extended self-test routine |
57 | | > recommended polling time: ( 186) minutes. |
58 | | > Conveyance self-test routine |
59 | | > recommended polling time: ( 5) minutes. |
60 | | > SCT capabilities: (0xb037) SCT Status supported. |
61 | | > SCT Feature Control supported. |
62 | | > SCT Data Table supported. |
63 | | > |
64 | | > SMART Attributes Data Structure revision number: 16 |
65 | | > Vendor Specific SMART Attributes with Thresholds: |
66 | | > ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE |
67 | | > 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 |
68 | | > 3 Spin_Up_Time POS--K 176 172 021 - 4191 |
69 | | > 4 Start_Stop_Count -O--CK 001 001 000 - 101587 |
70 | | > 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 |
71 | | > 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 |
72 | | > 9 Power_On_Hours -O--CK 085 085 000 - 11166 |
73 | | > 10 Spin_Retry_Count -O--CK 100 100 000 - 0 |
74 | | > 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 |
75 | | > 12 Power_Cycle_Count -O--CK 001 001 000 - 101586 |
76 | | > 192 Power-Off_Retract_Count -O--CK 065 065 000 - 101472 |
77 | | > 193 Load_Cycle_Count -O--CK 200 200 000 - 114 |
78 | | > 194 Temperature_Celsius -O---K 116 094 000 - 31 |
79 | | > 195 Hardware_ECC_Recovered -OS-CK 200 200 000 - 0 |
80 | | > 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 |
81 | | > 197 Current_Pending_Sector -O--CK 200 200 000 - 0 |
82 | | > 198 Offline_Uncorrectable ----CK 200 200 000 - 0 |
83 | | > 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 |
84 | | > 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 |
85 | | > ||||||_ K auto-keep |
86 | | > |||||__ C event count |
87 | | > ||||___ R error rate |
88 | | > |||____ S speed/performance |
89 | | > ||_____ O updated online |
90 | | > |______ P prefailure warning |
91 | | > |
92 | | > General Purpose Log Directory Version 1 |
93 | | > SMART Log Directory Version 1 [multi-sector log support] |
94 | | > Address Access R/W Size Description |
95 | | > 0x00 GPL,SL R/O 1 Log Directory |
96 | | > 0x01 SL R/O 1 Summary SMART error log |
97 | | > 0x02 SL R/O 5 Comprehensive SMART error log |
98 | | > 0x03 GPL R/O 6 Ext. Comprehensive SMART error log |
99 | | > 0x06 SL R/O 1 SMART self-test log |
100 | | > 0x07 GPL R/O 1 Extended self-test log |
101 | | > 0x09 SL R/W 1 Selective self-test log |
102 | | > 0x10 GPL R/O 1 NCQ Command Error log |
103 | | > 0x11 GPL R/O 1 SATA Phy Event Counters log |
104 | | > 0x80-0x9f GPL,SL R/W 16 Host vendor specific log |
105 | | > 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log |
106 | | > 0xa8-0xb4 GPL,SL VS 1 Device vendor specific log |
107 | | > 0xb5 GPL,SL VS 128 Device vendor specific log |
108 | | > 0xb6 GPL VS 1 Device vendor specific log |
109 | | > 0xb7 GPL,SL VS 1 Device vendor specific log |
110 | | > 0xc0 GPL,SL VS 1 Device vendor specific log |
111 | | > 0xc1 GPL VS 24 Device vendor specific log |
112 | | > 0xe0 GPL,SL R/W 1 SCT Command/Status |
113 | | > 0xe1 GPL,SL R/W 1 SCT Data Transfer |
114 | | > |
115 | | > SMART Extended Comprehensive Error Log Version: 1 (6 sectors) |
116 | | > No Errors Logged |
117 | | > |
118 | | > SMART Extended Self-test Log Version: 1 (1 sectors) |
119 | | > Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
120 | | > # 1 Short offline Completed without error 00% 11166 - |
121 | | > |
122 | | > SMART Selective self-test log data structure revision number 1 |
123 | | > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS |
124 | | > 1 0 0 Not_testing |
125 | | > 2 0 0 Not_testing |
126 | | > 3 0 0 Not_testing |
127 | | > 4 0 0 Not_testing |
128 | | > 5 0 0 Not_testing |
129 | | > Selective self-test flags (0x0): |
130 | | > After scanning selected spans, do NOT read-scan remainder of disk. |
131 | | > If Selective self-test is pending on power-up, resume after 0 minute delay. |
132 | | > |
133 | | > SCT Status Version: 2 |
134 | | > SCT Version (vendor specific): 258 (0x0102) |
135 | | > SCT Support Level: 1 |
136 | | > Device State: Active (0) |
137 | | > Current Temperature: 31 Celsius |
138 | | > Power Cycle Min/Max Temperature: 27/31 Celsius |
139 | | > Lifetime Min/Max Temperature: 27/53 Celsius |
140 | | > Under/Over Temperature Limit Count: 0/0 |
141 | | > |
142 | | > SCT Temperature History Version: 2 |
143 | | > Temperature Sampling Period: 1 minute |
144 | | > Temperature Logging Interval: 1 minute |
145 | | > Min/Max recommended Temperature: 0/60 Celsius |
146 | | > Min/Max Temperature Limit: -41/85 Celsius |
147 | | > Temperature History Size (Index): 478 (185) |
148 | | > |
149 | | > Index Estimated Time Temperature Celsius |
150 | | > 186 2020-10-23 03:59 49 ****************************** |
151 | | > ... ..( 70 skipped). .. ****************************** |
152 | | > 257 2020-10-23 05:10 49 ****************************** |
153 | | > 258 2020-10-23 05:11 50 ******************************* |
154 | | > 259 2020-10-23 05:12 49 ****************************** |
155 | | > ... ..( 7 skipped). .. ****************************** |
156 | | > 267 2020-10-23 05:20 49 ****************************** |
157 | | > 268 2020-10-23 05:21 50 ******************************* |
158 | | > 269 2020-10-23 05:22 50 ******************************* |
159 | | > 270 2020-10-23 05:23 49 ****************************** |
160 | | > ... ..( 3 skipped). .. ****************************** |
161 | | > 274 2020-10-23 05:27 49 ****************************** |
162 | | > 275 2020-10-23 05:28 50 ******************************* |
163 | | > 276 2020-10-23 05:29 49 ****************************** |
164 | | > ... ..( 4 skipped). .. ****************************** |
165 | | > 281 2020-10-23 05:34 49 ****************************** |
166 | | > 282 2020-10-23 05:35 50 ******************************* |
167 | | > 283 2020-10-23 05:36 49 ****************************** |
168 | | > ... ..( 2 skipped). .. ****************************** |
169 | | > 286 2020-10-23 05:39 49 ****************************** |
170 | | > 287 2020-10-23 05:40 50 ******************************* |
171 | | > 288 2020-10-23 05:41 49 ****************************** |
172 | | > 289 2020-10-23 05:42 49 ****************************** |
173 | | > 290 2020-10-23 05:43 50 ******************************* |
174 | | > ... ..( 7 skipped). .. ******************************* |
175 | | > 298 2020-10-23 05:51 50 ******************************* |
176 | | > 299 2020-10-23 05:52 49 ****************************** |
177 | | > 300 2020-10-23 05:53 49 ****************************** |
178 | | > 301 2020-10-23 05:54 50 ******************************* |
179 | | > ... ..( 47 skipped). .. ******************************* |
180 | | > 349 2020-10-23 06:42 50 ******************************* |
181 | | > 350 2020-10-23 06:43 ? - |
182 | | > 351 2020-10-23 06:44 27 ******** |
183 | | > 352 2020-10-23 06:45 27 ******** |
184 | | > 353 2020-10-23 06:46 28 ********* |
185 | | > 354 2020-10-23 06:47 29 ********** |
186 | | > 355 2020-10-23 06:48 29 ********** |
187 | | > 356 2020-10-23 06:49 30 *********** |
188 | | > 357 2020-10-23 06:50 31 ************ |
189 | | > 358 2020-10-23 06:51 49 ****************************** |
190 | | > ... ..( 11 skipped). .. ****************************** |
191 | | > 370 2020-10-23 07:03 49 ****************************** |
192 | | > 371 2020-10-23 07:04 50 ******************************* |
193 | | > 372 2020-10-23 07:05 49 ****************************** |
194 | | > ... ..( 7 skipped). .. ****************************** |
195 | | > 380 2020-10-23 07:13 49 ****************************** |
196 | | > 381 2020-10-23 07:14 50 ******************************* |
197 | | > 382 2020-10-23 07:15 49 ****************************** |
198 | | > 383 2020-10-23 07:16 49 ****************************** |
199 | | > 384 2020-10-23 07:17 50 ******************************* |
200 | | > 385 2020-10-23 07:18 50 ******************************* |
201 | | > 386 2020-10-23 07:19 49 ****************************** |
202 | | > ... ..( 17 skipped). .. ****************************** |
203 | | > 404 2020-10-23 07:37 49 ****************************** |
204 | | > 405 2020-10-23 07:38 50 ******************************* |
205 | | > 406 2020-10-23 07:39 49 ****************************** |
206 | | > ... ..( 16 skipped). .. ****************************** |
207 | | > 423 2020-10-23 07:56 49 ****************************** |
208 | | > 424 2020-10-23 07:57 50 ******************************* |
209 | | > 425 2020-10-23 07:58 49 ****************************** |
210 | | > ... ..(237 skipped). .. ****************************** |
211 | | > 185 2020-10-23 11:56 49 ****************************** |
212 | | > |
213 | | > SCT Error Recovery Control command not supported |
214 | | > |
215 | | > Device Statistics (GP/SMART Log 0x04) not supported |
216 | | > |
217 | | > Pending Defects log (GP Log 0x0c) not supported |
218 | | > |
219 | | > SATA Phy Event Counters (GP Log 0x11) |
220 | | > ID Size Value Description |
221 | | > 0x0001 2 0 Command failed due to ICRC error |
222 | | > 0x0002 2 0 R_ERR response for data FIS |
223 | | > 0x0003 2 0 R_ERR response for device-to-host data FIS |
224 | | > 0x0004 2 0 R_ERR response for host-to-device data FIS |
225 | | > 0x0005 2 0 R_ERR response for non-data FIS |
226 | | > 0x0006 2 0 R_ERR response for device-to-host non-data FIS |
227 | | > 0x0007 2 0 R_ERR response for host-to-device non-data FIS |
228 | | > 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET |
229 | | > 0x000b 2 0 CRC errors within host-to-device FIS |
230 | | > 0x8000 4 441 Vendor specific |
| 1 | (duplicate of description removed) |