Add to drivedb: Novachips SCALAR-04T

[Andrei Ivanov]

Request to add Novachips SCALAR-04T to drivedb. Smartctl output attached.

SMART attributes pdf:
​https://www.simms.co.uk/wp-content/uploads/2016/05/Novachips-2.5-SATA-Scalar-NS360-Spec__Industrial_3K-MLC_Ver.1.0.pdf

That's the patch we're using now:

--- smartmontools-7.1/drivedb.h.20200920 2020-09-20 15:45:41.000000000 +0000
+++ smartmontools-7.1/drivedb.h 2020-10-13 18:50:48.049599928 +0000
@@ -683,6 +683,38 @@

"-v 248,raw48,Lifetime_Remaining% " later then 0409 FW.
"-v 249,raw48,Spares_Remaining_Perc " later then 0409 FW.

},

+ ​https://www.simms.co.uk/wp-content/uploads/2016/05/Novachips-2.5-SATA-Scalar-NS360-Spec__Industrial_3K-MLC_Ver.1.0.pdf
+ - Table 15 on p.17
+ Refs #10180#note-11
+
+ { "Novachips Scalar SSD",
+ "SCALAR-04T", SCALAR-04T/NV.R1200
+ "", "",
+ "-v 1,raw48,Unknown_NS_Attribute "
+ "-v 9,raw24(raw8),Power_On_Hours "
+ "-v 12,raw48,Power_Cycle_Count "
+ "-v 13,raw48,Unknown_NS_Attribute "
+ "-v 181,raw48,Program_Failure_Blk_Ct "
+ "-v 184,raw48,Initial_Bad_Block_Count "
+ "-v 187,raw48,Read_Failure_Blk_Ct "
+ "-v 190,raw48,Temperature_Celsius "
+ "-v 199,raw48,SATA_CRC_Error_Count "
+ "-v 200,raw48,Write_Commands_Tot_Ct "
+ "-v 201,raw48,Read_Commands_Tot_Ct "
+ "-v 202,raw48,Unknown_NS_Attribute "
+ "-v 204,raw48,Unknown_NS_Attribute "
+ "-v 209,raw48,Remaining_Lifetime_Perc "
+ "-v 210,raw48,Erase_Count "
+ "-v 213,raw48,Maximum_PE_Cycles_Ct "
+ "-v 225,raw48,Unknown_NS_Attribute "
+ "-v 226,raw48,Flush_Commands_Tot_Ct "
+ "-v 227,raw48,Unknown_NS_Attribute "
+ "-v 228,raw48,Unknown_NS_Attribute "
+ "-v 229,raw48,Unknown_NS_Attribute "
+ "-v 230,raw48,Spare_Block_Count "
+ "-v 241,raw48,Unknown_NS_Attribute "
+ "-v 242,raw48,Unknown_NS_Attribute"
+ },

{ "Phison Driven SSDs", see MKP_521_Phison_SMART_attribute.pdf

"BP4 mSATA SSD|" MyDigital BP4, tested with BP4 mSATA SSD/S8FM06.9
"Corsair Force LE200 SSD|" tested with Corsair Force LE200 SSD/SBFM10, .../SBFM60.9