Opened 4 years ago
Closed 4 years ago
#1352 closed defect (invalid)
Vantec-SATA-IDE-Adapter-CB-ISA225-U3-Innostor Technology Corporation
| Reported by: | Ricky-89 | Owned by: | |
|---|---|---|---|
| Priority: | minor | Milestone: | |
| Component: | all | Version: | 6.6 |
| Keywords: | usb | Cc: |
Description (last modified by )
Summary:
Unable to run "smartctl -t short /dev/sda" test on HHD device. IDE/Sata device used "Vantec-SATA-IDE-Adapter-CB-ISA225-U3 from amazon.ca"
Contacted vendor and I was told that this adapter supports SATA pass-through command needed for smartctl
Device info form dmesg:
[ 5.028236] usb 1-1.4: Product: Ext. HDD [ 5.028250] usb 1-1.4: Manufacturer: Innostor [ 5.028265] usb 1-1.4: SerialNumber: 20191217
Device info from lsusb
Bus 001 Device 005: ID 1f75:0611 Innostor Technology Corporation
System setup
- Raspberry pi 2B v1.1 with raspberian OS 10 buster kernel 5.4.51-v7+
- smartctl version smartmontools release 6.6 dated 2017-11-05 at 15:20:58 UTC
For testing I cover the following brands of HHD:
- Hirachi 2.5", Seagate Barracuda and WD" with same results
On Raspbian:
when smart short test runs dmesg throws the following errors:
[Jul22 12:23] usb 1-1.4: reset high-speed USB device number 5 using dwc_otg [ +0.131704] program smartctl is using a deprecated SCSI ioctl, please convert
Output of the following : smartctl -x /dev/sdX
smartctl 6.6 2017-11-05 r4594 [armv7l-linux-5.4.51-v7+] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST1000DM003-9YN162
Serial Number: Z1D09G9G
LU WWN Device Id: 5 000c50 03f5dcb46
Firmware Version: CC9C
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Jul 22 12:18:59 2020 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 575) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 116) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3081) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 117 099 006 - 139691472
3 Spin_Up_Time PO---- 098 096 000 - 0
4 Start_Stop_Count -O--CK 089 089 020 - 12267
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 069 060 030 - 34428237722
9 Power_On_Hours -O--CK 086 086 000 - 12289
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 089 089 020 - 11272
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 099 099 000 - 1
188 Command_Timeout -O--CK 100 092 000 - 3 3 46
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 071 050 045 - 29 (Min/Max 25/29)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 095 095 000 - 10719
193 Load_Cycle_Count -O--CK 001 001 000 - 212072
194 Temperature_Celsius -O---K 029 050 000 - 29 (0 12 0 0 0)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 37
240 Head_Flying_Hours ------ 100 253 000 - 7652h+09m+40.677s
241 Total_LBAs_Written ------ 100 253 000 - 88166658689556
242 Total_LBAs_Read ------ 100 253 000 - 250402694700520
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 4496 Device vendor specific log
0xa8 GPL,SL VS 20 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xab GPL VS 1 Device vendor specific log
0xb0 GPL VS 5067 Device vendor specific log
0xbd GPL VS 512 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 12289 -
# 2 Short offline Completed without error 00% 12289 -
# 3 Short offline Completed without error 00% 12289 -
# 4 Short offline Completed without error 00% 12272 -
# 5 Short offline Completed without error 00% 12271 -
# 6 Short offline Completed without error 00% 12271 -
# 7 Short offline Completed without error 00% 12271 -
# 8 Short offline Completed without error 00% 12271 -
# 9 Short offline Completed without error 00% 12271 -
#10 Extended offline Aborted by host 70% 12264 -
#11 Short offline Completed without error 00% 12264 -
#12 Short offline Completed without error 00% 12263 -
#13 Short offline Completed without error 00% 12263 -
#14 Short offline Completed without error 00% 12263 -
#15 Short offline Completed without error 00% 12263 -
#16 Short offline Completed without error 00% 12262 -
#17 Short offline Completed without error 00% 12255 -
#18 Short offline Completed without error 00% 12231 -
#19 Extended offline Completed without error 00% 12210 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 30 Celsius
Power Cycle Min/Max Temperature: 25/30 Celsius
Lifetime Min/Max Temperature: 12/50 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Data Table command not supported
SCT Error Recovery Control command not supported
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
Attachments (1)
Change History (8)
by , 4 years ago
| Attachment: | Capture2.PNG added |
|---|
comment:1 by , 4 years ago
Execute the same test on a windows 10 laptop + smartctl 7.1 2019-12-30 r5022 [x86_64-w64-mingw32-w10-1903] (sf-7.1-1) Hit error =121 failed=IOCTL_SCSI_PASS_THROUGH_DIRECT failed (see image attached)
comment:2 by , 4 years ago
| Description: | modified (diff) |
|---|
comment:3 by , 4 years ago
| Component: | smartctl → all |
|---|---|
| Keywords: | usb added |
| Milestone: | → undecided |
| Priority: | major → minor |
Contacted vendor and I was told that this adapter supports SATA pass-through command needed for smartctl
The output shows that USB bridge supports SAT ATA PASS-THROUGH, but the implementation is incomplete:
Model Family: Seagate Barracuda 7200.14 (AF) Device Model: ST1000DM003-9YN162 ... SMART Status not supported: Incomplete response, ATA output registers missing ...
This may also the case for NON DATA commands which are required to start a self-test. Please provide output of smartctl -r ioctl,2 -t short /dev/sda.
PLEASE do not use screen shots. PLEASE do not paste smartctl output unchanged to tickets. Use plain-text attachments or wiki markup instead.
comment:4 by , 4 years ago
Here is the output of the command thank you:
pi@homer:~ $ sudo smartctl -r ioctl,2 -t short /dev/sda
smartctl 6.6 2017-11-05 r4594 [armv7l-linux-5.4.51-v7+] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
USB ID = 0x1f75:0x0611 (0x006)
REPORT-IOCTL: Device=/dev/sda Command=IDENTIFY DEVICE
Input: FR=...., SC=0x01, LL=...., LM=...., LH=...., DEV=...., CMD=0xec IN
do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=0 milliseconds resid=0
Incoming data, len=512 [only first 256 bytes shown]:
00 5a 0c ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00
10 00 00 00 00 20 20 20 20 20 20 20 20 20 20 20 20
20 31 5a 30 44 47 39 47 39 00 00 00 00 04 00 43 43
30 43 39 20 20 20 20 54 53 30 31 30 30 4d 44 30 30
40 2d 33 59 39 31 4e 32 36 20 20 20 20 20 20 20 20
50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80
60 00 40 00 2f 00 40 00 02 00 02 07 00 ff 3f 10 00
70 3f 00 10 fc fb 00 10 00 ff ff ff 0f 00 00 07 04
80 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00
90 00 00 00 00 00 00 1f 00 0e 85 04 00 4c 00 40 00
a0 f0 01 29 00 6b 34 09 7d 23 41 69 34 09 bc 23 41
b0 7f 00 38 00 38 00 80 80 fe ff 00 00 00 d0 00 00
c0 00 00 00 00 00 00 00 00 b0 6d 70 74 00 00 00 00
d0 00 00 00 00 03 60 00 00 00 50 00 c5 5d 3f 46 cb
e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1e 40
f0 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[Duration: 0.002s]
REPORT-IOCTL: Device=/dev/sda Command=IDENTIFY DEVICE returned 0
[IDENTIFY DEVICE] DATA START (BASE-16)
000-015: 5a 0c ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 |Z..?7.......?...|
016-031: 00 00 00 00 20 20 20 20 20 20 20 20 20 20 20 20 |.... |
032-047: 31 5a 30 44 47 39 47 39 00 00 00 00 04 00 43 43 |1Z0DG9G9......CC|
048-063: 43 39 20 20 20 20 54 53 30 31 30 30 4d 44 30 30 |C9 TS0100MD00|
080-095: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 | ..|
096-111: 00 40 00 2f 00 40 00 02 00 02 07 00 ff 3f 10 00 |.@./.@.......?..|
112-127: 3f 00 10 fc fb 00 10 00 ff ff ff 0f 00 00 07 04 |?...............|
128-143: 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00 |..x.x.x.x.......|
144-159: 00 00 00 00 00 00 1f 00 0e 85 04 00 4c 00 40 00 |............L.@.|
160-175: f0 01 29 00 6b 34 09 7d 23 41 69 34 09 bc 23 41 |..).k4.}#Ai4..#A|
176-191: 7f 00 38 00 38 00 80 80 fe ff 00 00 00 d0 00 00 |..8.8...........|
192-207: 00 00 00 00 00 00 00 00 b0 6d 70 74 00 00 00 00 |.........mpt....|
208-223: 00 00 00 00 03 60 00 00 00 50 00 c5 5d 3f 46 cb |.....`...P..]?F.|
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1e 40 |...............@|
240-255: 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |.@..............|
256-271: 21 00 b0 6d 70 74 b0 6d 70 74 20 20 02 00 40 01 |!..mpt.mpt ..@.|
272-287: 00 01 00 50 06 3c 0a 3c 00 00 3c 00 00 00 08 00 |...P.<.<..<.....|
288-303: 00 00 00 00 7f 00 80 02 00 00 00 00 08 00 00 00 |................|
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 58 e0 88 |.............X..|
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 81 30 00 00 |.............0..|
416-431: 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 |...@............|
432-447: 00 00 20 1c 00 00 00 00 00 00 00 00 20 10 00 00 |.. ......... ...|
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a5 5a |...............Z|
[IDENTIFY DEVICE] DATA END (512 Bytes)
REPORT-IOCTL: Device=/dev/sda Command=SMART READ ATTRIBUTE VALUES
Input: FR=0xd0, SC=0x01, LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 08 0e 00 d0 00 01 00 00 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
sg_info=0x0 sg_duration=290 milliseconds resid=0
Incoming data, len=512 [only first 256 bytes shown]:
00 0a 00 01 0f 00 75 63 80 bb ea 08 00 00 00 03 03
10 00 62 60 00 00 00 00 00 00 00 04 32 00 59 59 f1
20 2f 00 00 00 00 00 05 33 00 64 64 00 00 00 00 00
30 00 00 07 0f 00 45 3c f5 16 16 04 08 00 00 09 32
40 00 56 56 17 30 00 00 00 00 00 0a 13 00 64 64 00
50 00 00 00 00 00 00 0c 32 00 59 59 09 2c 00 00 00
60 00 00 b7 32 00 64 64 00 00 00 00 00 00 00 b8 32
70 00 64 64 00 00 00 00 00 00 00 bb 32 00 63 63 01
80 00 00 00 00 00 00 bc 32 00 64 5c 2f 00 04 00 04
90 00 00 bd 3a 00 64 64 00 00 00 00 00 00 00 be 22
a0 00 46 32 1e 00 1c 21 00 00 00 bf 32 00 64 64 00
b0 00 00 00 00 00 00 c0 32 00 5f 5f df 29 00 00 00
c0 00 00 c1 32 00 01 01 97 3c 03 00 00 00 00 c2 22
d0 00 1e 32 1e 00 00 00 0c 00 00 c5 12 00 64 64 00
e0 00 00 00 00 00 00 c6 10 00 64 64 00 00 00 00 00
f0 00 00 c7 3e 00 c8 c8 25 00 00 00 00 00 00 f0 00
[Duration: 0.289s]
REPORT-IOCTL: Device=/dev/sda Command=SMART READ ATTRIBUTE VALUES returned 0
[SMART READ ATTRIBUTE VALUES] DATA START (BASE-16)
000-015: 0a 00 01 0f 00 75 63 80 bb ea 08 00 00 00 03 03 |.....uc.........|
016-031: 00 62 60 00 00 00 00 00 00 00 04 32 00 59 59 f1 |.b`........2.YY.|
032-047: 2f 00 00 00 00 00 05 33 00 64 64 00 00 00 00 00 |/......3.dd.....|
048-063: 00 00 07 0f 00 45 3c f5 16 16 04 08 00 00 09 32 |.....E<........2|
064-079: 00 56 56 17 30 00 00 00 00 00 0a 13 00 64 64 00 |.VV.0........dd.|
080-095: 00 00 00 00 00 00 0c 32 00 59 59 09 2c 00 00 00 |.......2.YY.,...|
096-111: 00 00 b7 32 00 64 64 00 00 00 00 00 00 00 b8 32 |...2.dd........2|
112-127: 00 64 64 00 00 00 00 00 00 00 bb 32 00 63 63 01 |.dd........2.cc.|
128-143: 00 00 00 00 00 00 bc 32 00 64 5c 2f 00 04 00 04 |.......2.d\/....|
144-159: 00 00 bd 3a 00 64 64 00 00 00 00 00 00 00 be 22 |...:.dd........"|
160-175: 00 46 32 1e 00 1c 21 00 00 00 bf 32 00 64 64 00 |.F2...!....2.dd.|
176-191: 00 00 00 00 00 00 c0 32 00 5f 5f df 29 00 00 00 |.......2..)...|
192-207: 00 00 c1 32 00 01 01 97 3c 03 00 00 00 00 c2 22 |...2....<......"|
208-223: 00 1e 32 1e 00 00 00 0c 00 00 c5 12 00 64 64 00 |..2..........dd.|
224-239: 00 00 00 00 00 00 c6 10 00 64 64 00 00 00 00 00 |.........dd.....|
240-255: 00 00 c7 3e 00 c8 c8 25 00 00 00 00 00 00 f0 00 |...>...%........|
256-271: 00 64 fd f5 1d 00 00 18 41 21 f1 00 00 64 fd 61 |.d......A!...d.a|
272-287: 5c 60 e6 2f 50 00 f2 00 00 64 fd 20 c7 c3 df d2 |\`./P....d. ....|
288-303: e3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 3f 02 00 73 |............?..s|
368-383: 03 00 01 00 01 74 02 00 00 00 00 00 00 00 00 00 |.....t..........|
384-399: 00 00 00 00 09 00 00 00 04 03 03 03 03 03 02 03 |................|
400-415: 03 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 |................|
416-431: 00 00 00 00 00 00 00 00 69 31 07 7b 4f 28 00 00 |........i1.{O(..|
432-447: 00 00 00 00 01 00 50 00 61 5c 60 e6 2f 50 00 00 |......P.a\`./P..|
448-463: 20 c7 c3 df d2 e3 00 00 00 00 00 00 00 00 00 00 | ...............|
464-479: 00 00 00 00 00 00 00 00 99 0e 00 00 10 00 00 00 |................|
480-495: 00 00 00 00 40 00 01 00 00 00 00 00 00 00 00 1e |....@...........|
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c6 |................|
[SMART READ ATTRIBUTE VALUES] DATA END (512 Bytes)
START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION
Sending command: "Execute SMART Short self-test routine immediately in off-line mode".
REPORT-IOCTL: Device=/dev/sda Command=SMART IMMEDIATE OFFLINE InputParameter=1
Input: FR=0xd4, SC=...., LL=0x01, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0
do_scsi_cmnd_io: sg_io_ver=3
[ata pass-through(16): 85 06 0c 00 d4 00 00 00 01 00 4f 00 c2 00 b0 00 ]
scsi_status=0x0, sg_transport_status=0x3, sg_driver_status=0x0
sg_info=0x1 sg_duration=64190 milliseconds resid=0
sat_device::ata_pass_through: scsi_pass_through() failed, errno=110 [Connection timed out]
[Duration: 64.189s]
REPORT-IOCTL: Device=/dev/sda Command=SMART IMMEDIATE OFFLINE returned -1 errno=110 [Connection timed out]
Command "Execute SMART Short self-test routine immediately in off-line mode" failed: Connection timed out
comment:5 by , 4 years ago
[Duration: 64.189s] REPORT-IOCTL: Device=/dev/sda Command=SMART IMMEDIATE OFFLINE returned -1 errno=110 [Connection timed out] Command "Execute SMART Short self-test routine immediately in off-line mode" failed: Connection timed out
Duration should be below 1 second. Either the ATA itself command times out or USB bridge firmware has problems with pass-through of NON DATA commands.
Did you try smartctl -t short with same disk on a regular SATA controller?
Last resort would be smartctl -d sat,12 -t short /dev/sda. If this does not work, there is nothing we could do.
comment:6 by , 4 years ago
I have no tried to run smartctl -t short on another sata controller..
Unfortunately when I ran the command the drive was dropped from the OS. Forcing me to reboot in order to have it back online. See output below:
Here is my output
pi@homer:~ $ sudo smartctl -d sat,12 -t short /dev/sda smartctl 6.6 2017-11-05 r4594 [armv7l-linux-5.4.51-v7+] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Short self-test routine immediately in off-line mode". Command "Execute SMART Short self-test routine immediately in off-line mode" failed: Connection timed out
Thanks for your time.
comment:7 by , 4 years ago
| Milestone: | undecided |
|---|---|
| Resolution: | → invalid |
| Status: | new → closed |
Possible bug in SAT layer of USB bridge in conjunction with ATA command SMART EXECUTE OFF-LINE IMMEDIATE. Cannot be fixed by smartmontools.
screenshot from windows os