Opened 5 months ago

Closed 4 months ago

#1352 closed defect (invalid)

Vantec-SATA-IDE-Adapter-CB-ISA225-U3-Innostor Technology Corporation

Reported by: Ricky-89 Owned by:
Priority: minor Milestone:
Component: all Version: 6.6
Keywords: usb Cc:

Description (last modified by Christian Franke)

Summary:

Unable to run "smartctl -t short /dev/sda" test on HHD device. IDE/Sata device used "Vantec-SATA-IDE-Adapter-CB-ISA225-U3 from amazon.ca"
Contacted vendor and I was told that this adapter supports SATA pass-through command needed for smartctl

Device info form dmesg:

[    5.028236] usb 1-1.4: Product: Ext. HDD
[    5.028250] usb 1-1.4: Manufacturer: Innostor
[    5.028265] usb 1-1.4: SerialNumber: 20191217

Device info from lsusb

Bus 001 Device 005: ID 1f75:0611 Innostor Technology Corporation

System setup

  • Raspberry pi 2B v1.1 with raspberian OS 10 buster kernel 5.4.51-v7+
  • smartctl version smartmontools release 6.6 dated 2017-11-05 at 15:20:58 UTC

For testing I cover the following brands of HHD:

  • Hirachi 2.5", Seagate Barracuda and WD" with same results

On Raspbian:
when smart short test runs dmesg throws the following errors:

[Jul22 12:23] usb 1-1.4: reset high-speed USB device number 5 using dwc_otg
[  +0.131704] program smartctl is using a deprecated SCSI ioctl, please convert 

Output of the following : smartctl -x /dev/sdX

smartctl 6.6 2017-11-05 r4594 [armv7l-linux-5.4.51-v7+] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST1000DM003-9YN162
Serial Number:    Z1D09G9G
LU WWN Device Id: 5 000c50 03f5dcb46
Firmware Version: CC9C
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Jul 22 12:18:59 2020 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unavailable

=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  575) seconds.
Offline data collection
capabilities: 			 (0x73) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 116) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x3081)	SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   117   099   006    -    139691472
  3 Spin_Up_Time            PO----   098   096   000    -    0
  4 Start_Stop_Count        -O--CK   089   089   020    -    12267
  5 Reallocated_Sector_Ct   PO--CK   100   100   036    -    0
  7 Seek_Error_Rate         POSR--   069   060   030    -    34428237722
  9 Power_On_Hours          -O--CK   086   086   000    -    12289
 10 Spin_Retry_Count        PO--C-   100   100   097    -    0
 12 Power_Cycle_Count       -O--CK   089   089   020    -    11272
183 Runtime_Bad_Block       -O--CK   100   100   000    -    0
184 End-to-End_Error        -O--CK   100   100   099    -    0
187 Reported_Uncorrect      -O--CK   099   099   000    -    1
188 Command_Timeout         -O--CK   100   092   000    -    3 3 46
189 High_Fly_Writes         -O-RCK   100   100   000    -    0
190 Airflow_Temperature_Cel -O---K   071   050   045    -    29 (Min/Max 25/29)
191 G-Sense_Error_Rate      -O--CK   100   100   000    -    0
192 Power-Off_Retract_Count -O--CK   095   095   000    -    10719
193 Load_Cycle_Count        -O--CK   001   001   000    -    212072
194 Temperature_Celsius     -O---K   029   050   000    -    29 (0 12 0 0 0)
197 Current_Pending_Sector  -O--C-   100   100   000    -    0
198 Offline_Uncorrectable   ----C-   100   100   000    -    0
199 UDMA_CRC_Error_Count    -OSRCK   200   200   000    -    37
240 Head_Flying_Hours       ------   100   253   000    -    7652h+09m+40.677s
241 Total_LBAs_Written      ------   100   253   000    -    88166658689556
242 Total_LBAs_Read         ------   100   253   000    -    250402694700520
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
Address    Access  R/W   Size  Description
0x00       GPL,SL  R/O      1  Log Directory
0x01           SL  R/O      1  Summary SMART error log
0x02           SL  R/O      5  Comprehensive SMART error log
0x03       GPL     R/O      5  Ext. Comprehensive SMART error log
0x06           SL  R/O      1  SMART self-test log
0x07       GPL     R/O      1  Extended self-test log
0x09           SL  R/W      1  Selective self-test log
0x10       GPL     R/O      1  NCQ Command Error log
0x11       GPL     R/O      1  SATA Phy Event Counters log
0x21       GPL     R/O      1  Write stream error log
0x22       GPL     R/O      1  Read stream error log
0x80-0x9f  GPL,SL  R/W     16  Host vendor specific log
0xa1       GPL,SL  VS      20  Device vendor specific log
0xa2       GPL     VS    4496  Device vendor specific log
0xa8       GPL,SL  VS      20  Device vendor specific log
0xa9       GPL,SL  VS       1  Device vendor specific log
0xab       GPL     VS       1  Device vendor specific log
0xb0       GPL     VS    5067  Device vendor specific log
0xbd       GPL     VS     512  Device vendor specific log
0xbe-0xbf  GPL     VS   65535  Device vendor specific log
0xc0       GPL,SL  VS       1  Device vendor specific log
0xe0       GPL,SL  R/W      1  SCT Command/Status
0xe1       GPL,SL  R/W      1  SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     12289         -
# 2  Short offline       Completed without error       00%     12289         -
# 3  Short offline       Completed without error       00%     12289         -
# 4  Short offline       Completed without error       00%     12272         -
# 5  Short offline       Completed without error       00%     12271         -
# 6  Short offline       Completed without error       00%     12271         -
# 7  Short offline       Completed without error       00%     12271         -
# 8  Short offline       Completed without error       00%     12271         -
# 9  Short offline       Completed without error       00%     12271         -
#10  Extended offline    Aborted by host               70%     12264         -
#11  Short offline       Completed without error       00%     12264         -
#12  Short offline       Completed without error       00%     12263         -
#13  Short offline       Completed without error       00%     12263         -
#14  Short offline       Completed without error       00%     12263         -
#15  Short offline       Completed without error       00%     12263         -
#16  Short offline       Completed without error       00%     12262         -
#17  Short offline       Completed without error       00%     12255         -
#18  Short offline       Completed without error       00%     12231         -
#19  Extended offline    Completed without error       00%     12210         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       522 (0x020a)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    30 Celsius
Power Cycle Min/Max Temperature:     25/30 Celsius
Lifetime    Min/Max Temperature:     12/50 Celsius
Under/Over Temperature Limit Count:   0/0

SCT Data Table command not supported

SCT Error Recovery Control command not supported

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x000a  2            1  Device-to-host register FISes sent due to a COMRESET
0x0001  2            0  Command failed due to ICRC error
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS

Attachments (1)

Capture2.PNG (77.1 KB) - added by Ricky-89 5 months ago.
screenshot from windows os

Download all attachments as: .zip

Change History (8)

Changed 5 months ago by Ricky-89

Attachment: Capture2.PNG added

screenshot from windows os

comment:1 Changed 5 months ago by Ricky-89

Execute the same test on a windows 10 laptop + smartctl 7.1 2019-12-30 r5022 [x86_64-w64-mingw32-w10-1903] (sf-7.1-1) Hit error =121 failed=IOCTL_SCSI_PASS_THROUGH_DIRECT failed (see image attached)

comment:2 Changed 4 months ago by Christian Franke

Description: modified (diff)

comment:3 Changed 4 months ago by Christian Franke

Component: smartctlall
Keywords: usb added
Milestone: undecided
Priority: majorminor

Contacted vendor and I was told that this adapter supports SATA pass-through command needed for smartctl

The output shows that USB bridge supports SAT ATA PASS-THROUGH, but the implementation is incomplete:

Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST1000DM003-9YN162
...
SMART Status not supported: Incomplete response, ATA output registers missing
...

This may also the case for NON DATA commands which are required to start a self-test. Please provide output of smartctl -r ioctl,2 -t short /dev/sda.

PLEASE do not use screen shots. PLEASE do not paste smartctl output unchanged to tickets. Use plain-text attachments or wiki markup instead.

comment:4 Changed 4 months ago by Ricky-89

Here is the output of the command thank you:

pi@homer:~ $ sudo smartctl -r ioctl,2 -t short /dev/sda
smartctl 6.6 2017-11-05 r4594 [armv7l-linux-5.4.51-v7+] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

USB ID = 0x1f75:0x0611 (0x006)

REPORT-IOCTL: Device=/dev/sda Command=IDENTIFY DEVICE
 Input:   FR=...., SC=0x01, LL=...., LM=...., LH=...., DEV=...., CMD=0xec IN
>>>> do_scsi_cmnd_io: sg_io_ver=3
 [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ]
  scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
  sg_info=0x0  sg_duration=0 milliseconds  resid=0
  Incoming data, len=512 [only first 256 bytes shown]:
 00     5a 0c ff 3f 37 c8 10 00  00 00 00 00 3f 00 00 00
 10     00 00 00 00 20 20 20 20  20 20 20 20 20 20 20 20
 20     31 5a 30 44 47 39 47 39  00 00 00 00 04 00 43 43
 30     43 39 20 20 20 20 54 53  30 31 30 30 4d 44 30 30
 40     2d 33 59 39 31 4e 32 36  20 20 20 20 20 20 20 20
 50     20 20 20 20 20 20 20 20  20 20 20 20 20 20 10 80
 60     00 40 00 2f 00 40 00 02  00 02 07 00 ff 3f 10 00
 70     3f 00 10 fc fb 00 10 00  ff ff ff 0f 00 00 07 04
 80     03 00 78 00 78 00 78 00  78 00 00 00 00 00 00 00
 90     00 00 00 00 00 00 1f 00  0e 85 04 00 4c 00 40 00
 a0     f0 01 29 00 6b 34 09 7d  23 41 69 34 09 bc 23 41
 b0     7f 00 38 00 38 00 80 80  fe ff 00 00 00 d0 00 00
 c0     00 00 00 00 00 00 00 00  b0 6d 70 74 00 00 00 00
 d0     00 00 00 00 03 60 00 00  00 50 00 c5 5d 3f 46 cb
 e0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 1e 40
 f0     1c 40 00 00 00 00 00 00  00 00 00 00 00 00 00 00
 [Duration: 0.002s]
REPORT-IOCTL: Device=/dev/sda Command=IDENTIFY DEVICE returned 0

===== [IDENTIFY DEVICE] DATA START (BASE-16) =====
000-015: 5a 0c ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 |Z..?7.......?...|
016-031: 00 00 00 00 20 20 20 20 20 20 20 20 20 20 20 20 |....            |
032-047: 31 5a 30 44 47 39 47 39 00 00 00 00 04 00 43 43 |1Z0DG9G9......CC|
048-063: 43 39 20 20 20 20 54 53 30 31 30 30 4d 44 30 30 |C9    TS0100MD00|
064-079: 2d 33 59 39 31 4e 32 36 20 20 20 20 20 20 20 20 |-3Y91N26        |
080-095: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 |              ..|
096-111: 00 40 00 2f 00 40 00 02 00 02 07 00 ff 3f 10 00 |.@./.@.......?..|
112-127: 3f 00 10 fc fb 00 10 00 ff ff ff 0f 00 00 07 04 |?...............|
128-143: 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00 |..x.x.x.x.......|
144-159: 00 00 00 00 00 00 1f 00 0e 85 04 00 4c 00 40 00 |............L.@.|
160-175: f0 01 29 00 6b 34 09 7d 23 41 69 34 09 bc 23 41 |..).k4.}#Ai4..#A|
176-191: 7f 00 38 00 38 00 80 80 fe ff 00 00 00 d0 00 00 |..8.8...........|
192-207: 00 00 00 00 00 00 00 00 b0 6d 70 74 00 00 00 00 |.........mpt....|
208-223: 00 00 00 00 03 60 00 00 00 50 00 c5 5d 3f 46 cb |.....`...P..]?F.|
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1e 40 |...............@|
240-255: 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |.@..............|
256-271: 21 00 b0 6d 70 74 b0 6d 70 74 20 20 02 00 40 01 |!..mpt.mpt  ..@.|
272-287: 00 01 00 50 06 3c 0a 3c 00 00 3c 00 00 00 08 00 |...P.<.<..<.....|
288-303: 00 00 00 00 7f 00 80 02 00 00 00 00 08 00 00 00 |................|
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 58 e0 88 |.............X..|
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 81 30 00 00 |.............0..|
416-431: 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 |...@............|
432-447: 00 00 20 1c 00 00 00 00 00 00 00 00 20 10 00 00 |.. ......... ...|
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a5 5a |...............Z|
===== [IDENTIFY DEVICE] DATA END (512 Bytes) =====


REPORT-IOCTL: Device=/dev/sda Command=SMART READ ATTRIBUTE VALUES
 Input:   FR=0xd0, SC=0x01, LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
>>>> do_scsi_cmnd_io: sg_io_ver=3
 [ata pass-through(16): 85 08 0e 00 d0 00 01 00 00 00 4f 00 c2 00 b0 00 ]
  scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
  sg_info=0x0  sg_duration=290 milliseconds  resid=0
  Incoming data, len=512 [only first 256 bytes shown]:
 00     0a 00 01 0f 00 75 63 80  bb ea 08 00 00 00 03 03
 10     00 62 60 00 00 00 00 00  00 00 04 32 00 59 59 f1
 20     2f 00 00 00 00 00 05 33  00 64 64 00 00 00 00 00
 30     00 00 07 0f 00 45 3c f5  16 16 04 08 00 00 09 32
 40     00 56 56 17 30 00 00 00  00 00 0a 13 00 64 64 00
 50     00 00 00 00 00 00 0c 32  00 59 59 09 2c 00 00 00
 60     00 00 b7 32 00 64 64 00  00 00 00 00 00 00 b8 32
 70     00 64 64 00 00 00 00 00  00 00 bb 32 00 63 63 01
 80     00 00 00 00 00 00 bc 32  00 64 5c 2f 00 04 00 04
 90     00 00 bd 3a 00 64 64 00  00 00 00 00 00 00 be 22
 a0     00 46 32 1e 00 1c 21 00  00 00 bf 32 00 64 64 00
 b0     00 00 00 00 00 00 c0 32  00 5f 5f df 29 00 00 00
 c0     00 00 c1 32 00 01 01 97  3c 03 00 00 00 00 c2 22
 d0     00 1e 32 1e 00 00 00 0c  00 00 c5 12 00 64 64 00
 e0     00 00 00 00 00 00 c6 10  00 64 64 00 00 00 00 00
 f0     00 00 c7 3e 00 c8 c8 25  00 00 00 00 00 00 f0 00
 [Duration: 0.289s]
REPORT-IOCTL: Device=/dev/sda Command=SMART READ ATTRIBUTE VALUES returned 0

===== [SMART READ ATTRIBUTE VALUES] DATA START (BASE-16) =====
000-015: 0a 00 01 0f 00 75 63 80 bb ea 08 00 00 00 03 03 |.....uc.........|
016-031: 00 62 60 00 00 00 00 00 00 00 04 32 00 59 59 f1 |.b`........2.YY.|
032-047: 2f 00 00 00 00 00 05 33 00 64 64 00 00 00 00 00 |/......3.dd.....|
048-063: 00 00 07 0f 00 45 3c f5 16 16 04 08 00 00 09 32 |.....E<........2|
064-079: 00 56 56 17 30 00 00 00 00 00 0a 13 00 64 64 00 |.VV.0........dd.|
080-095: 00 00 00 00 00 00 0c 32 00 59 59 09 2c 00 00 00 |.......2.YY.,...|
096-111: 00 00 b7 32 00 64 64 00 00 00 00 00 00 00 b8 32 |...2.dd........2|
112-127: 00 64 64 00 00 00 00 00 00 00 bb 32 00 63 63 01 |.dd........2.cc.|
128-143: 00 00 00 00 00 00 bc 32 00 64 5c 2f 00 04 00 04 |.......2.d\/....|
144-159: 00 00 bd 3a 00 64 64 00 00 00 00 00 00 00 be 22 |...:.dd........"|
160-175: 00 46 32 1e 00 1c 21 00 00 00 bf 32 00 64 64 00 |.F2...!....2.dd.|
176-191: 00 00 00 00 00 00 c0 32 00 5f 5f df 29 00 00 00 |.......2.__.)...|
192-207: 00 00 c1 32 00 01 01 97 3c 03 00 00 00 00 c2 22 |...2....<......"|
208-223: 00 1e 32 1e 00 00 00 0c 00 00 c5 12 00 64 64 00 |..2..........dd.|
224-239: 00 00 00 00 00 00 c6 10 00 64 64 00 00 00 00 00 |.........dd.....|
240-255: 00 00 c7 3e 00 c8 c8 25 00 00 00 00 00 00 f0 00 |...>...%........|
256-271: 00 64 fd f5 1d 00 00 18 41 21 f1 00 00 64 fd 61 |.d......A!...d.a|
272-287: 5c 60 e6 2f 50 00 f2 00 00 64 fd 20 c7 c3 df d2 |\`./P....d. ....|
288-303: e3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 3f 02 00 73 |............?..s|
368-383: 03 00 01 00 01 74 02 00 00 00 00 00 00 00 00 00 |.....t..........|
384-399: 00 00 00 00 09 00 00 00 04 03 03 03 03 03 02 03 |................|
400-415: 03 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 |................|
416-431: 00 00 00 00 00 00 00 00 69 31 07 7b 4f 28 00 00 |........i1.{O(..|
432-447: 00 00 00 00 01 00 50 00 61 5c 60 e6 2f 50 00 00 |......P.a\`./P..|
448-463: 20 c7 c3 df d2 e3 00 00 00 00 00 00 00 00 00 00 | ...............|
464-479: 00 00 00 00 00 00 00 00 99 0e 00 00 10 00 00 00 |................|
480-495: 00 00 00 00 40 00 01 00 00 00 00 00 00 00 00 1e |....@...........|
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 c6 |................|
===== [SMART READ ATTRIBUTE VALUES] DATA END (512 Bytes) =====

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line mode".

REPORT-IOCTL: Device=/dev/sda Command=SMART IMMEDIATE OFFLINE InputParameter=1
 Input:   FR=0xd4, SC=...., LL=0x01, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0
>>>> do_scsi_cmnd_io: sg_io_ver=3
 [ata pass-through(16): 85 06 0c 00 d4 00 00 00 01 00 4f 00 c2 00 b0 00 ]
  scsi_status=0x0, sg_transport_status=0x3, sg_driver_status=0x0
  sg_info=0x1  sg_duration=64190 milliseconds  resid=0
sat_device::ata_pass_through: scsi_pass_through() failed, errno=110 [Connection timed out]
 [Duration: 64.189s]
REPORT-IOCTL: Device=/dev/sda Command=SMART IMMEDIATE OFFLINE returned -1 errno=110 [Connection timed out]
Command "Execute SMART Short self-test routine immediately in off-line mode" failed: Connection timed out
Last edited 4 months ago by Christian Franke (previous) (diff)

comment:5 Changed 4 months ago by Christian Franke

 [Duration: 64.189s]
REPORT-IOCTL: Device=/dev/sda Command=SMART IMMEDIATE OFFLINE returned -1 errno=110 [Connection timed out]
Command "Execute SMART Short self-test routine immediately in off-line mode" failed: Connection timed out

Duration should be below 1 second. Either the ATA itself command times out or USB bridge firmware has problems with pass-through of NON DATA commands.

Did you try smartctl -t short with same disk on a regular SATA controller?

Last resort would be smartctl -d sat,12 -t short /dev/sda. If this does not work, there is nothing we could do.

comment:6 Changed 4 months ago by Ricky-89

I have no tried to run smartctl -t short on another sata controller..

Unfortunately when I ran the command the drive was dropped from the OS. Forcing me to reboot in order to have it back online. See output below:

Here is my output

pi@homer:~ $ sudo smartctl -d sat,12 -t short /dev/sda
smartctl 6.6 2017-11-05 r4594 [armv7l-linux-5.4.51-v7+] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in off-line mode".
Command "Execute SMART Short self-test routine immediately in off-line mode" failed: Connection timed out

Thanks for your time.

Last edited 4 months ago by Christian Franke (previous) (diff)

comment:7 Changed 4 months ago by Christian Franke

Milestone: undecided
Resolution: invalid
Status: newclosed

Possible bug in SAT layer of USB bridge in conjunction with ATA command SMART EXECUTE OFF-LINE IMMEDIATE. Cannot be fixed by smartmontools.

Note: See TracTickets for help on using tickets.